ADXL345 Accelerometer Module ADXL345 is a Breakout board for the Analog Device's ADXL345 triple-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers (3V3 & 5V). Components like decoupling capacitors, filter capacitors, pull-up resistors, and LED are also populated on board. This is ideal for motion and acceleration sensing applications. It is a low-power, 3-axis accelerometer module with I2C and SPI interfaces to communicate with controllers like Arduino Raspberry Pi, PIC, etc. It also has user-selectable sensitivity and 10-13bit of resolution. This Digital Accelerometer has a voltage regulator on board and can be connected to 5V and 3.3V powered controllers. Its high-resolution 4mg/LSB also enables it to measure less than 1° change in the object orientation. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G. And it supports output data rates ranging from 10Hz to 3200Hz such as the Arduino. Also check, our product 6-axis motion tracking mpu6050 sensor Features: 13-bit resolution measurement at up to ±16g. Consumes as low as 23 ?A in measurement mode and 0.1 ?A in standby mode. Data is formatted as 16-bit two’s complement and accessible via SPI or I2C interfaces. Includes tap/double tap detection, activity/inactivity monitoring, and free-fall detection. Operates between 2.0 V to 3.6 V. Compact Size: Small and thin. Features a FIFO buffer to minimize host processor load. Check out our collections of Accelerometer Applications: Cost-sensitive, low power, motion- and tilt-sensing applications Mobile devices Gaming systems Robotics applications Data acquisition system of a vehicle Measuring vibration in a machine Monitoring bridge movements Detecting taps on objects Disk drive protection Image stabilization Sports and health devices

ADXL345 Accelerometer Module ADXL345 is a Breakout board for the Analog Device's ADXL345 triple-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers (3V3 & 5V). Apart from the above all, necessary components like decoupling capacitors, filter capacitors, pull-up resistors and LED are also populated on board. It is ideal for motion and acceleration sensing applications.It is a low-power, 3-axis MEMS accelerometer module with both I2C and SPI interfaces. The ADXL345 is a low-power, MEMS, three-axis accelerometer module with both SPI and I2C interfaces to communicate with your controller like Arduino , Raspberry Pi , PIC, etc. It also has user-selectable sensitivity and 10-13bit of resolution. This Digital Accelerometer has a voltage regulator on board hence can be connected to both 5V and 3.3V powered controllers. Its high-resolution 4mg/LSB also enables it to measure less than 1° change in the orientation of the object. The ADXL Sensor can be used in Robotics applications, measuring vibration in a machine, in the data acquisition system of a vehicle, measuring the motions of a bridge, etc. It can also be used to detect taps on an object. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G. And it supports output data rates ranging from 10Hz to 3200Hz such as the Arduino. Applications: Cost-sensitive, low power, motion- and tilt-sensing applications Mobile devices Gaming systems Data acquisition system of a vehicle Measuring vibration in a machine Disk drive protection Image stabilization Sports and health devices

AI Vision Kit for VinciBot by Matatalab The AI Vision Kit for VinciBot by Matatalab is an amazing kit that makes the VinciBot coding robot even better by adding cool AI features and pre-trained models. It’s super easy to use, so anyone can explore different AI applications through simple graphical programming. This kit is a great way to get into AI and robotics. What you'll love about the AI Vision Kit is how it helps you learn by doing. Students can teach VinciBot to see and respond to things around it, which makes learning about computer vision really fun. It’s a great tool that makes advanced technology easy to understand and exciting. This kit helps spark creativity and problem-solving skills in kids, inspiring the next generation of tech innovators. If you want to explore new possibilities in AI and robotics, the AI Vision Kit for VinciBot is a must-have! Features: Rich AI Functions: Includes human and cat face detection, color line following, color recognition, AprilTag detection, and handwriting recognition (0-9). Customizable Training: One-click data collection for personalized face and color recognition. Advanced Hardware: Features a flippable camera, protective cover, 1.5-inch LCD screen, control buttons, fill light, and USB-C interfaces. Educational Use: Supports projects with pre-trained and self-trained models for various learning levels.

Aluminum Heat Sink for Raspberry Pi Zero 2W The Aluminium Heat Sink for Raspberry Pi is a heat sink kit made of aluminum that is used to cool the chip's microprocessor. The heat sink is attached with thermally conductive adhesive tape, which helps in cooling the Raspberry Pi efficiently. A heat sink is a passive heat exchanger that transfers heat generated by an electronic or mechanical device, allowing optimal temperature regulation of the device. Heat sinks are used with high-power semiconductor devices when the component's heat dissipation capacity is insufficient to keep the temperature stable. The Broadcom CPU on the Raspberry Pi Zero is cooled using high-quality aluminum heatsinks. Reduce the risk of hardware failure due to overheating when running at full speed, while also extending the board's life. It includes a 3M thermal adhesive. Small enough to fit into the Raspberry Pi Zero. Can be used on Raspberry Pi 2W components and other devices.

Arduino Innovation Kit for Innovative Engineering This Arduino Innovation Kit is useful for hobbyists to test and prototype their electrical projects. Engineering students can buy this Innovation Kit online to develop and build their final projects. This kit is validated on Arduino but other microcontrollers can be used as well. This Innovation kit contains all the necessary electronic components to get started with Arduino and embedded systems. All the components included in the kit are of good quality and are compatible with Arduino.

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328. It is compact in size, suitable in many applications where space comes at a premium. It has 22 GPIO pins, 8 of which are analogue pins. It supports commonly used communication protocols such as UART, SPI and I2C A 16x2 LCD display is a very basic module and is very commonly used in various integrated devices and circuits. A 16x2 LCD means it can display 16 characters per line and there are 2 such lines In addition to the above two components, there are many more components such as motors, buzzer, LED, Keypad, etc that can help you get started in integrating various sensor to make a complete DIY solution Pinout for Arduino Nano Applications of this Kit This Nano board Compatible Ultimate Starter Kit is great for absolute beginners. The starter kit for Arduino users comes with a number of components comprising of various sensors and actuators helping you get started on simple concepts on how to display data on LCD, control motors using the keypad, control appliances using a relay, etc.

Arduino Robotics Kit for Grade 8 This is an All-in-one kit, a great starter kit for learning to code. It is an ideal kit for Starting with Arduino Programming. A variety of components are included in this pack to try out different projects. All the components in the Arduino kit for grade 8 students are 100% genuine with the compatible boards for Arduino and are of the best quality. This Arduino kit is perfect for school students to learn about Arduino and embedded systems. This Kit encourages children to get away from their screens and engages them in activities and games with their robots. This kit is designed for kids above the age of 10. There is no need for soldering or alterations, and all of the components have been thoroughly tested for straight assembly. Read our blog Smart Dustbin Arduino detailing Arduino code for making a smart dustbin, the required components, and the circuit diagram for making an automatic dustbin project. Features: All-in-one kit designed for Grade 8 students Based on the UNO board compatible with Arduino Ideal for learning to code and starting with Arduino programming Components are of the best quality No need for soldering or alterations Encourages hands-on activities and games with robots read more : INTRODUCTION OF ROBOTICS IN SCHOOL Applications: Make your computer ready Control LED through Switch Multicolor LED (Mood Lamp) Control LED through Clap Print your Name, Age on the LCD Make your own Calculator Dancing LED Also, read our blog on Top 10 Arduino projects for beginners from simulating traffic lights to monitoring temperature, humidity, and even fluid flow rates, these hands-on experiments offer an exciting start to your journey into electronics.

UNO 21-in-1 Starter Kit compatible with Arduino This is a 21-in-1 Arduino starter kit based is validated on Arduino but other microcontrollers can be used as well. This UNO starter kit contains all the necessary electronic components to get started with the UNO board, Arduino, and embedded systems. All the sensors included in the kit are of good quality and are compatible with Arduino. The Arduino Starter kit will help you get started in the world of electronics and embedded system programming. This kit is aimed at beginners and intermediates and can be used to jump-start your growth and learning towards DIY electronics and embedded system. This Arduino starter kit is useful for students and hobbyists to test and prototype their electrical projects. Engineering students can buy UNO basic starter kits online to develop and build their final semester projects. Uno SMD : The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. Breadboard : A breadboard allows for easy and quick creation of temporary electronic circuits or to carry out experiments with circuit design. Battery cap : The Battery caps serve two purposes; they permit the checking and maintenance of water and acid levels and provide a vent for the escape of gases formed when the battery is charging. Resistor Box : The resistance box is an instrument for measuring and comparing electrical resistances. Capacitor : A capacitor is a passive two-terminal electrical component used to store energy electrostatically in an electric field. Jumper Wires : Male ends have a pin protruding and can plug into things, while female ends do not and are used to plug things into. Male-to-male jumper wires are the most common and what you likely will use most often. Transistor : A transistor is a device that regulates current or voltage flow and acts as a switch or gate for electronic signals Button Switch : A button switch is a type of switch which consists of a simple electric mechanism or air switch mechanism to turn something on or off. Buzzer : A buzzer or beeper is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric (piezo for short). LDR : An LDR (Light Dependent Resistor) is a component that has a (variable) resistance that changes with the light intensity that falls upon it. This allows them to be used in light sensing circuits. Light Dependent Resistors (LDR) are also called photoresistors. SEVEN-SEGMENT DISPLAY : A seven-segment display is a set of seven bar-shaped LED (light-emitting diode) or LCD (liquid crystal display) elements, arranged to form a squared-off figure 8. A few seven-segment displays use other illumination devices, such as incandescent or gas-plasma ("neon") lamps. PIR Motion Sensor Module : PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation. 16X2 LCD MODULE : The 16x2 Alphanumeric LCD Display Module is equally popular among hobbyists and professionals for its affordable price and easy-to-use nature. As the name suggests the 16x2 Alphanumeric LCD can show 16 Columns and 2 Rows therefore a total of (16x2) 32 characters can be displayed. Each character can either be an alphabet or number or even a custom character. Check out our entire range of DIY Kits Compatible with Arduino Pinout for Arduino Uno Arduino Uno Pinouts Applications: Home Automation System Security System IoT based projects DIY Projects

UNO Basic Starter Kit compatible with Arduino Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button This UNO board starter kit is useful for students and hobbyists to test and prototype their electrical projects. Engineering students can buy UNO basic starter kit online to develop and build their final semester projects. Pinout for Arduino Uno Applications of this Kit The Arduino basic Starter kit will help you get started in the world of electronics and embedded system programming. This kit is aimed at beginners and can be easily obtained to get you started with DIY electronics

UNO DIY Line Follower Kit Compatible with Arduino This is UNO DIY Line Follower Kit or Line follower robot, as the name implies, It is an automated vehicle that follows a visual line embedded on the surface. This visual line represents the path that the line follower robot will take. It usually uses a black line on a white background, but you can change it to a white line on a black background. This type of line follower robot using arduino is typically used by beginners and students to gain their first robotic experience. Giant line follower robots are used in industries to aid in the automated production process. They are also used in military applications, humanitarian aid, delivery services, and so on. Get the Official Arduino Starter Kit – Perfect for Hands-On Learning Working: This line follower robot using arduino is a simple Microcontroller-based car with two infrared sensors. These sensors determine whether the line colour is reflective or not. In this case, reflection means that the surface reflects the light. The White surface is the reflective surface in this case. (Only the black lines have a non-reflective surface.) This means that black tracks do not reflect any light. The sensor detects whether or not there is any reflective light coming back. Only the sensor will provide an output (there are two types of output). I'll get to that later). And if there is no reflection, the IR sensor will not produce any output, or the output will be low. The microcontroller ( Arduino UNO) can control the car based on the High and Low Output results. The microcontroller ( Arduino UNO) instructs the car on where to go, when to turn (left or right), and where to stop. This line follower robot using arduino consists of arduino UNO with cable , Motor driver shield for arduino , IR sensors , Base board , DC motors, Battery container, wheels , Jumper wires , Encoder disc, Switch , Hammer castor, spacers and screws check out : RF controlled BOT Pinout for the Arduino Uno: Arduino Pin Diagram DIY Line Follower Robot Instructions Applications: Line follower Robot Obstacle Avoider Robot Maze solving Robot Smart parking