Cytron 40Amp 10V-45V Smart Drive DC Motor Driver Up to 80A The Cytron 40A motor driver, officially known as the Cytron Smart Drive 40Amp, is an enhanced version of the popular MDS40A. Designed to drive medium to high power brushed DC motors, it handles an impressive 40A continuously and up to 80A at peak, making it a high current motor driver suitable for demanding applications. Supporting a wide voltage range of 10V–45V, it operates quietly thanks to 16kHz PWM switching, eliminating the typical whining sound. Packed with smart features including thermal protection, current limiting, and versatile input modes like RC (Radio Control), PWM, analog, and UART, this 10V–45V DC motor driver is ideal for robotics and high-torque motion systems. Additionally, it supports dual-unit operation, simplifying differential drive robot configurations. Whether you're building a combat robot or a powerful mobile platform, the Enhanced SmartDrive40 offers robust and intelligent motor control. Note: Please consider proper wire/cable for the battery and motor, thin jumper wire/cable is not suitable for high current application. It will affect the performance of driver and motor control. We recommend using Multicore Wire AWG14 Red and Multicore Wire AWG14 Black. Features: Bidirectional control of a single brushed DC motor. Support motor voltages ranging from 10 to 45 volts. Maximum current up to 80A peak, progressively reduced to 40A based on temperature. The switching frequency is 16 KHz, which allows for quiet operation. LiPo battery low voltage warning. Thermal protection. Current limit based on temperature. Input modalities include RC (Radio Control), Analog, PWM, Simplified Serial, and Packetized Serial. Manual operation is accomplished via an on-board push button. Enhanced Features: Increased Vin range to 45VDC, allowing you to use larger batteries and control more powerful motors. A responsive current limiting sensor and algorithm help to protect both the driver and your motor. Screw connectors with high amperage capacity for both battery and motor connections. An additional terminal for activating or deactivating the driver further turns off the power to the motor driver, removing the requirement for the high-power switch. Use a switching power supply to regulate 5V, increase output current (5V), and enhance efficiency. Option to install a fan for improved heat dissipation and increased maximum continuous current. The header is ready for RC receiver connection. Protection from overvoltage. Specificaions: Specification Details Item Type Motor Driver Model Series MDS Series Voltage Rating (V) 10 to 45 Current Rating (A) 40 to 80 Driver Model Cytron MDS40B Peak Current (A) 80 Continuous Current (A) 40 Number of Channels 1 Operating Modes PWM (Lock-Antiphase and Sign-Magnitude), UART, Analog, RC Servo Signal Overcurrent Protection Yes Thermal Protection Yes LED Indicator Yes Test/Manual Button Yes Cooling Fan No Arduino Shield Compatible Can be used with wire connection, No direct shield Polarity Protection No

Cytron Advanced Auto-Calibrating Line Sensor The Cytron Advanced Auto-Calibrating Line Sensor, also known as the Cytron Sensor Module LSA08, is a high-performance solution for any robotics or embedded application requiring precise line tracking. Featuring 8 pairs of sensors, this Auto-Calibrating Line Sensor is engineered to adapt to different colored surfaces, including Red, Green, Blue, White, Black, and Gray. Its super bright green LEDs enhance detection capabilities across various brightness levels, making it versatile and reliable in dynamic environments. The LSA08 supports multiple output modes—digital (8-bit parallel), UART serial, and analog—to ensure compatibility with a wide range of microcontrollers and systems. Whether you are building a DIY robot or developing an industrial automation solution, the Cytron Line Sensor offers the accuracy, adaptability, and ease-of-use you need. Features: 8 sensor pairs, 16mm apart. 12 volts input power The LSA08 features an on-board mode and select button for quick setting, as well as three output modes (digital, UART, and analog). The LCD display unit displays the analog values of eight sensors, together with a bar chart and line position. Simple Auto-Calibration function for the line-following surface. Junction Pulse (JPULSE) for detecting and counting junctions. Power polarity protection Low current usage (usually 26 mA). Works with shiny or reflective surfaces. Refresh rate is up to 200 Hz.

Cytron Maker Drive H-Bridge Motor Driver for Beginner The Cytron Maker Drive is a beginner-friendly H-Bridge Motor Driver designed specifically to simplify controlling brushed DC motors. Unlike traditional solutions like the L298N, this Motor Driver for Beginners offers an easy-to-use interface, making it perfect for those new to motor control. The compact DC Motor Driver Board allows you to control both the speed and direction of your motor effortlessly. Simply supply power to the motor terminals, and with the Maker Drive, you get seamless control without complicated wiring or programming. This makes it an ideal choice for hobbyists, students, and anyone looking to start working with DC motors quickly and effectively. The Problem Faced by Beginners in Driving DC Brushed Motor Maker Drive is built based on user feedback, particularly from first-time users. If you are a beginner or newcomer who need a basic motor driver to drive a DC brushed motor for developing a mobile robot or other uses, you may encounter some of the following challenges: Burning your Motor Driver - Many low-cost motor drivers do not include Reserve Polarity Protection, which can result in smoke shooting out of the driver if you connect the power in the incorrect polarity. This results in a burned-out motor driver, as well as a loss of money and effort. This will increase your anxiousness about starting your electronics project. Too bulky for a tiny project - Some motor drivers come with a large heat sink that takes up too much space. Difficult to test and debug - When using a standard motor driver for a building project, beginners frequently encounter a problem with testing and troubleshooting the circuit. Yes, even with a clear schematic or diagram, the circuit will not work immediately after connecting. Most of the time, we'll have to test or troubleshoot. Without easy-to-use input and output indications, you must develop a software to evaluate the motor driver. And this complicates troubleshooting because we don't know if the problem is caused by a wire connection or code in your software. Separate Power for Low Voltage Motor - Many low-cost motor drivers include an integrated 5V linear voltage regulator, which is ideal for powering a controller like Arduino. However, this linear voltage regulator will not output 5V if Vin is less than 7V. However, many little toy motors used in DIY projects are rated at less than 7V. These motors can be driven by two AA or AAA batteries (3V or less), or a single-cell Li-ion 18650/Li-Po battery (3.7V rated voltage). That means you'll need two distinct power sources: one for the motors and another to provide a consistent 5V output for a controller like the Arduino board. Here is Our Solution: Maker Drive Maker Drive is designed to solve the above problems while adding some useful features: Fool-Proof (Peace of Mind) - Maker Drive includes reverse polarity protection at the Vin/V motor/Vbatt (motor power) terminals. This safeguard will significantly lower the chance of harming the motor driver. Maker Drive is designed to be tiny, around the size of a passport photo (43mm(W) x 35mm(L) x 14mm(H). 4 Test Buttons (2 for each channel) - Easily test the motor or mechanism without a controller or coding. Maker Drive includes two manual test buttons for each channel. Pressing one of the buttons will cause the output to run at full speed in a specific direction (if a motor is connected) on the corresponding channel. While another button directs the output in another direction. These buttons can be used to test the motor's direction, connection, and operation even without a controller. You'll love these buttons, believe me! You can also utilize these buttons for manual activation. No programming is required to use these buttons. 4 Indicator LEDs (2 per channel) - Simply test your coding and wire connections. You can use these indication LEDs to monitor the output voltage direction even if your motor is not connected. When used with the Manual Test Buttons, you can simply test the Maker Drive even without the controller or motor connected. You may also immediately identify the source of the mistake, making debugging easier. Of course, no programming is required either. These LEDs aid with testing and troubleshooting. Buck-boost regulator produces 5V output from an input voltage as low as 2.5V. You can power your 5V controller with two AA batteries. Maker Drive can output 5V with input voltages ranging from 2.5V to 9.5V. This 5V output can supply 200mA to an external circuit such as a controller (Arduino), eliminating the need to get another power source for your controller. Now, your project can be powered by a single power source. With its wide input voltage range, Maker Drive can be powered by two AA or AAA batteries (1.5V x 2 = 3V) or a single-cell Li-ion or Lipo battery with a rated voltage of 3.7V. That's fantastic! Regenerative Braking Control - Also known as Regen braking, this feature gives you more control over the motor's speed. Most applications function better in regen braking, such as line following, because the controller can manage the speed more precisely. Another option is coast stops, which allow the motor to slow down or stop due to inertia. Support Stepper Motor - This is a bonus feature! Maker Drive is capable of operating a stepper motor. Features: Dual-channel bidirectional control motor driver. Support motor voltages ranging from 2.5V to 9.5V. The maximum continuous current is 1.0A, with a peak of 1.5A in less than 5 seconds. 5V output (200mA) is used to power the controller. Inputs are compatible with 1.8V, 3.3V, and 5V logic (Arduino, Raspberry Pi, etc.). Solid-state components have a faster response time and eliminate the wear and tear of mechanical relays. Regenerative braking. Speed control PWM frequency up to 20KHz (actual output frequency equals input frequency). Maker Drive is not an Arduino Shield, but it is compatible with different models of Arduino main board such as: Arduino UNO R3 Arduino Mega 2560 Arduino Nano Arduino Pro Mini And the list goes on…. Not to forget that it accepts 1.8V, 3.3V & 5V logic (for control) and is compatible with a controller such as Raspberry Pi, Beagle Bone, ESP8266, ESP32, etc.

Cytron Maker Line Sensor for Beginner The Cytron Maker Line Sensor is a beginner-friendly line tracking sensor designed to simplify the process of building line-following robots or automated guided vehicles (AGVs). Known for its ease of use, the Maker Line Sensor Module features a 5x IR sensor array that can detect line widths between 13mm and 30mm. Whether your application requires tracking light (white) or dark (black) lines, this Cytron Line Sensor has you covered. Gone are the days of manually adjusting each sensor’s potentiometer—thanks to its one-touch calibration system. Just press and hold the calibrate button for 2 seconds, sweep the sensor across the line, press again, and it's calibrated. Calibration data is stored in EEPROM, meaning it remains even after powering off, making setup a one-time process unless major changes are made. The Maker Line Sensor Module offers dual output modes: five digital outputs for individual sensor states and a single analog output that provides high-resolution line position data. This analog capability is especially useful for precision tasks like PID-controlled robots. Whether you're a student, hobbyist, or engineer, the Cytron Maker Line Sensor is the reliable and accurate tool you need for your next line-following project. Maker Line Sensor Pinout Diagram: Applications: Line Following Mobile Robot Automated Guided Vehicle (AGV) Features: Operating voltage: DC. 3.3V and 5V compatible (reverse polarity protection). Recommended line width is 13mm to 30mm. Line color can be selected (bright or dark). Sensing range (height): 4mm to 40mm (Vcc = 5V, black line on a white surface). Sensor Refresh Rate: 200 Hz. Simple calibrating procedure. Dual Output Types: Each IR sensor state is represented by five digital outputs, while one analog output represents line position. It supports a wide number of controllers, including Arduino and Raspberry Pi.

Cytron Maker Mini Sumo Development Board for Robot The Cytron Maker Mini Sumo Development Board is a compact, reliable, and competition-ready controller specifically designed for building Sumo robots. Whether you're a beginner entering your first match or a seasoned competitor in international robot contests, the Maker Mini Sumo Board offers a hassle-free solution with minimal electronic setup. This Cytron Sumo Robot Controller features a unique shock-proof on/off circuitry that ensures your robot remains powered even if the slide switch gets disconnected, preventing unexpected resets during intense moments. Built with performance and reliability in mind, the Cytron Maker Mini Sumo board is the perfect choice for anyone looking to create a competitive edge in Sumo robot events. Features: Arduino Nano/Uno compatible (powered by the ATMEGA328P). Reverse polarity protection on Vin. Shock-resistant on/off switch with MOSFET latching circuit. The battery voltage can be accessed programmatically. Switching regulator for +5V reduces heat while increasing efficiency. Test buttons and motor status LED. 5 Opponent Sensor Inputs (Digital) with LED state indicators. 2 edge sensor inputs (analog/digital). 2 General Purpose Input Output (Analog/Digital Input, Digital Output). Start Module Input (Digital), with LED and an inbuilt start button. Servo output. A programmable LED. Onboard potentiometer. Mode Selection DIP Switch (3 Ways). Piezo buzzer (can play a melody).

Cytron MOTION 2350 Pro - Advanced Robotics Controller for Beginners The Cytron MOTION 2350 Pro is an advanced robotics controller designed to simplify complex robotic builds for both beginners and makers. This high-performance MOTION 2350 Pro controller can drive up to four brushed DC motors with a current capacity of 3A per channel and voltage support from 3.6V to 16V—perfect for powering mecanum wheel robots with ease. It also features 8-channel 5V servo ports, 8 GPIO breakouts, and 3 versatile Maker Ports, making it compatible with a wide variety of sensors and components. The standout feature of this Cytron robotics controller is its built-in USB host support, allowing effortless integration with a USB joystick or gamepad for immediate plug-and-play control. Whether you're starting out or diving deeper into robotics, the advanced robotics controller MOTION 2350 Pro offers an ideal blend of power, flexibility, and ease of use. Features: Controls up to 4 brushed DC motors (3A max per channel, 3.6V–16V) 8-channel 5V servo ports for precise servo control 8-channel GPIO breakout for sensor and component integration 3 Maker Ports for flexible peripheral connections Built-in USB host for direct joystick/gamepad plug-and-play Ideal for mecanum wheel and advanced robotics projects

Cytron SmartDriveDuo-60A 7V-45V DC Motor Driver The Cytron SmartDriveDuo-60A 7V-45V DC Motor Driver is a high-performance dual-channel motor controller capable of delivering 60A continuous current per channel, making it ideal for powering high-torque motors in combat robots, sumo bots, and advanced robotics projects. Designed with versatility in mind, this Cytron 60A motor driver accepts a wide input voltage range from 7V to 45V and supports multiple control interfaces including RC (radio control), PWM, analog voltage, and UART serial commands - perfect for seamless integration with microcontrollers like Arduino and PIC. Drawing from the success of previous Cytron motor drivers such as MD10C and MDDS10, the SmartDrive motor controller 60A includes a host of smart features. It is equipped with a built-in brushless fan for efficient cooling, high-frequency 16kHz MOSFET switching for silent operation, and onboard temperature sensors with stage-by-stage current limiting to prevent overheating. The controller also features easy RC receiver integration using a 2×3 header pin, plus a battery low-voltage warning system for safe operation. Whether you’re upgrading your robot's power system or building from scratch, the Cytron dual channel motor controller ensures robust, smart, and reliable motor control. Features: It is a DC brush motor driver, not for brushless motors. A single power action simply connects power to the battery input. Dual Channels: It may run two brush motors independently or simultaneously. Operating modes include RC (RC servo signal), Analog, PWM, and simplified/packetized UART. PWM mode now supports signed magnitude and locked anti-phase. The top cover includes two DC brushless fans to cool the driver. There are two manual/test buttons for each channel. There are two output indicator LEDs for each channel. Power, error indicator, run status (left and right) LEDs The on-board reset button is used to restart the MCU after changing operation mode. Temperature feedback to regulate current and prevent MOSFET overheating. At room temperature, it can support up to 60A of continuous current. Supports up to 100A peak for one second. As the temperature rises, the current will become limited. Suitable for fighting or sumo robots. The switching frequency is 16KHz, allowing for quiet operation. An onboard switching voltage regulator improves power efficiency. Battery low voltage monitoring mode. We tested this driver with a single power window motor at 24V, full load, and no smoke came out.

DC Mini Submersible Water Pump Motor 12V This DC Mini Submersible Water Pump Motor 12V.The pump can be used with an Aquarium or any other small solar-based pumping application. It can be also used with a Sanitizer Dispenser. This pump is completely submersible. DC Powered, can be used in solar systems. This pump is widely used in industry, scientific research, aerospace industry. Features: Bottom inlet design, maximum capacity. Uses advanced components and wear-resistant shaft Smooth operation, high efficiency, good performance, long service life Can be a long time continuously work, low noise, Applications: The mini water pump can be used in salt-water or fresh-water Perfect for small to medium-sized aquariums, fish tanks, pet cat-dog water fountains, waterfalls in terrariums, Tabletop fountains, spout, and water gardens.

DC Motor Drive Module 2 Channel Reversing PWM Speed Dual H Bridge Stepper Controller This motor drive module is ideal for use in battery-powered smart cars, toy cars, and robots. Supply voltage 2V ~ 10V, can drive two DC motors or 4-wire 2-phase stepper motors, can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. Each can provide a continuous current of 1.5A, a peak current of up to 2.5A, thermal protection, and can be automatically restored. Note: Power positive and negative reversed will certainly cause damage to the circuit. Output is shorted to ground or output short circuit, and the motor stall, the chip will heat protection, but in the near or exceeding 10V voltage and the peak current is greater than 2.5A situation can also cause chip burned. Features: Dual H-bridge motor driver can drive two DC motors or a 4-wire two-phase stepper motor Low standby current (less than 0.1uA) Built-in common conduction circuit When the input pin is left floating, the motor does not malfunction Built-in thermal protection circuit with hysteresis effects (TSD), without worrying about the motor stall Small in size Lightweight

DC Submersible Aquarium Pump 6V-12V 5W 500L/H Flow adjustable water pump is designed fully submersible for both fresh water and saltwater. This pump creates water flow and aerates your aquarium to simulate a natural ocean/river environment. The pump is a must-have accessory for your fish tank, fountain and more. Submersible water pump for aquarium, fountain, fish pond, etc. The flow rate is adjustable with a knob in front of the pump With 2 suction cups at the bottom and is to be used in water only. check out : DC Submersible Aquarium Pump 6V-12V 4W-5W 500L/H