Non-Corrosive Soldering Paste Flux (500g) This solder paste flux is ideal for soldering wide electric and electronic components & bonding will be free from faulty soldering problems. The flux has stable performance, volatile, long life cycle, the amount of Provincial, non-toxic, odorless, safe to use, and reliable. Soldering flux paste is a very important part of soldering. Flux is necessary to reduce the oxides that tend to form whenever you have hot metals in contact with the air. In electronics, we use a rosin-core solder or a mild solder or water-soluble solder. Note: Store in room temperature and out of reach o children. In case of contact with eyes immediately rinse with plenty water and seek medical advice. Wear protective material for hands, eyes and face for safety. In case of accident or feel unwell seek medical advice immediately. Applications: Great Soldering Rework Tools for Smart Phone PCB Soldering Iron paste Motherboard Repairing

Nose Plier NP-01 5" Inch Nose Pliers NP-01 are the perfect tool for gripping and manipulating wire and other small objects. These pliers feature a long nose design that makes them ideal for reaching into tight spaces. Made from high-quality materials, these pliers are built to last. Generally used in electronics work and DIY Project. Nose Pliers are a must-have for hobbyists or electronic engineers. Applications: Electronics work Hobbyists Jewelry DIY Project Also check the Smooth Nose Piler NP-99 from Iotcart. The Nose Pliers are designed for gripping and manipulating wires and small objects, particularly useful in electronics work and DIY projects. They feature an improved handle for extra comfort and grip, and they come with a wire cutter.

Octal 3-State Buffer/Line Driver IC - 74HC244 The 74HC Series 74HC244 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory address drivers, clock drivers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data line input, they provide improved noise rejection and high fan-out outputs and can be used to drive terminated lines down to 133?. Pinout: Pinout Of 74HC244 IC

Octal 3-State Buffer/Line Driver IC - 74HC541 The 74HC Series 74HC541 IC is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. check out : Octal 3-State Buffer/Line Driver IC - 74HC244 Pinout: Pinout of 74HC541 IC Applications: Industrial Automation & Process Control Signal Processing Automotive

Octal 3-state Inverting Buffer IC - 74HC540 The 74HC Series 74HC540 is a 20 Pin Octal 3-state Inverting Buffer IC having a 2V to 6V Operating Voltage range with a 6mA output current. The 3-STATE  buffers utilize advanced silicon-gate  CMOS  technology.  They possess high drive current outputs, enabling high-speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low-power Schottky devices while retaining the advantage of CMOS circuitry, i.e., high noise immunity, and low power consumption. Both devices have a fanout of 15 LS-TTL equivalent inputs. The  74HC540  is an inverting buffer and the MM74HC541 is a non-inverting buffer. The 3-STATE control gate operates as a two-input NOR such that if either G1 or  G2 is HIGH,  all eight outputs are in the high-impedance state. Pinout: Pinout Of 74HC540 IC

Octal Buffer Line Driver IC - 74HC240 The 74HC series 74HC240 3-STATE buffer utilizes advanced silicon-gate CMOS technology. It possesses high drive current outputs which enable high-speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low-power Schottky devices while retaining the advantage of CMOS circuitry, i.e., high noise immunity and low power consumption. It has a fanout of 15 LS-TTL equivalent inputs. The 74HC240 is an inverting buffer and has two active LOW enables (1G and 2G). Each enables independent controls with 4 buffers. All inputs are protected from damage due to static discharge by diodes to VCC and the ground. check out : Hex Inverter Buffer IC - 74HC06 Pinout: Pinout of 74HC240 IC

Octal D-Type Flip-Flop with Reset IC - 74HC273 The 74HC series 74HC273 is a 20-Pin Octal D-Type Positive Edge Trigger Flip-Flop with Reset IC having 2V to 6V Operating Voltage range with 5.2mA output current and high noise immunity. The device features clock (CP) and master reset (MR) inputs. The outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A LOW on MR forces the outputs LOW independently of the clock and data inputs. Inputs include clamp diodes. This enables the use of current-limiting resistors to interface inputs to voltages in excess of VCC. Pinout: Pinout Of 74HC273 IC

Octal D-Type Latch 3-State Output IC - 74HC373 The 74HC Series 74HC373 high-speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus-organized system. When the LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and the ground. Pinout: Pinout Of 74HC373 IC

Octal D-Type Transparent Latch IC - 74HC573 The 74HC Series 74HC573 IC high-speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE(LE) input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a HIGH logic level is applied to the OUTPUT CONTROL OC input, all outputs go to a HIGH impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and the ground. Pinout: Pinout Of 74HC573 IC

Official 3.97-inch Arduino GIGA Touchscreen Display Shield 480x800 The Official Arduino GIGA Display Shield is designed to seamlessly add a touchscreen display with orientation detection to your Arduino GIGA R1 WiFi board. This Arduino display shield enables easy integration of an external touch display and provides several useful peripherals, making it an ideal solution for developing Human-Machine Interface (HMI) systems. With the included gyroscope, it offers automatic orientation detection, allowing visual elements to adjust accordingly. This feature is particularly beneficial for rapid prototyping in interaction design, enabling you to explore new ways of communicating with technology, such as through social robots that react to sound. Additionally, the built-in microphone enables voice assistant capabilities, paired with the powerful edge computing of the GIGA R1 WiFi for voice automation and visual feedback. Features: Display: 3.97-inch KD040WVFID026-01-C025A TFT display Resolution: 480x800 pixels Color Depth: 16.7 million colors for vibrant display Pixel Size: 0.108 mm for crisp and clear visuals Touch Sensor: Capacitive touch with 5-point multi-touch and gesture support Backlight: Edge LED backlight for enhanced visibility IMU (Inertial Measurement Unit): 16-bit BMI270 6-axis IMU for precise motion sensing Accelerometer: 3-axis with selectable range (2g/4g/8g/16g) for motion detection Gyroscope: 3-axis with adjustable range (125dps/250dps/500dps/1000dps/2000dps) for accurate orientation RGB LED: SMLP34RGB2W3 RGB LED for customizable lighting effects Acoustic Overload Point (AOP): 122.5 dB SPL for clear audio performance Signal-to-Noise Ratio: 64 dB for high-quality audio output Sensitivity: 26 dBFS with 3 dB sensitivity for improved detection Display Driver: IS31FL3197-QFLS2-TR driver with integrated charge pump for optimal performance Connector: GIGA Connector for secure board attachment Camera Connector: 2.54 mm camera connector for easy camera integration