IOIO-OTG for Android with USB OTG Cable The IOIO-OTG board facilitates easy and rapid connection of electronic circuits to a PC or an Android device. You can connect the IOIO-OTG to the Android/PC via USB or Bluetooth, and power it (not mandatory if used in USB device mode). The board has 46 I/O pins for linking your circuits, which can also be powered from the IOIO-OTG. You can control the I/O pins by programming in Java and utilizing the high-level API and provided libraries. The board has an automatic detection feature for its role in the connection, but a switch can be utilized to force it into host mode. The IOIO-OTG board can be upgraded using the IOIODude application without the need for a programmer, and it frequently releases new application firmware. The latest version of the board has addressed previous issues such as IC power failure and the absence of a decoupling cap on the AVIN pin, making it a better and more reliable product. The IOIO-OTG board features a JST connector for attaching a LiPo battery, pin headers for voltage and ground access, and a trimpot for regulating the charge current when acting as a host. A USB-A to micro-A OTG cable is included in the kit for connecting your Android device to the micro-USB port on the board, using the cable that came with your device. This kit does not require any soldering and is ideal for individuals with intermediate programming skills, although motivated beginners are welcome. Basic knowledge of programming and electronic hardware is recommended. Features: 2 Pin 2mm SMD JST Right-angle Connector for Input supply On-board TPS62133RGTT Synchronous step down DC-DC converter. Power Status LED (RED) Micro USB for Communication with Android. One start LED connected to boot pin (RC12 =Pin no. 39). User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively. Port extensions for all ports with detailed pin labeling for easy identification of pins Vin, 5V, 3.3V and GND bus provided for external peripheral. Four 3mm mounting holes for easy mounting

IoT and DIY Smart Car Starter Kit Compatible with Arduino This is the most comprehensive kit for learning Arduino, smart cars, and IoT. The 2-in-1 kit contains over 50 projects. This DIY IOT starter kit includes an ESP8266 node MCU and an Arduino DIP-compatible board. The Mechanical structure is simple, it is easy to install. This car is the tachometer encoder. With a 4 AA battery box. It can be used for distance measurement, velocity. Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control. IoT and DIY Smart Car Starter Kit Applications: DIY Wireless Robotic car Smart Car based on Node MCU Obstacle Avoiding Car Line Following Car

IOT Starter Kit

IOT-GA6 GPRS GSM Module IOT-GA6 GPRS GSM Module is an ideal IoT solution for automotive, industrial, personal tracking, power environment, wireless POS, smart metering and other projects with ultra-small size. The control pins are strobe, clock, and data. The strobe and clock pins are only output while the data pin can be both output and input. The strobe pin is used when sending data to the board - you set the strobe pin to low before you start sending data - one or more bytes - and then set the strobe pin back to high. Note that there is just one data pin which means the data is being sent 1 bit at a time. This is where the clock pin comes into play. When sending data you set the clock pin to low then you set the data pin and set the clock pin back to high to commit the bit value. This chip supports GSM/GPRS network, available for GPRS and SMS message data remote transmission.With the help of the A6 chip, GPRS is never deactivated until its application is on and online. It supports either digital and analog audio, with HR, FR, EFR, and AMR voice coding. This module can add voice, text, SMS, and data capabilities to your Arduino project. It has more price-to-performance value than the SIM800 and SIM900 modules. This small and low power consumption module can communicate with the microcontrollers and Arduino boards through the UART interface, with the capability of command reception, including GSM 07.07, and GSM 07.05 standards. It can be used for IoT projects, M2M applications, industrial automation, BMS projects, home automation, public transportation, personal tracking, electricity environment detection, wireless POS, smart metering, and other M2M applications Features Mini version of a serial GSM/GPRS core development board based on GPRS A6 chip Supports dual-band GSM/GPRS network for GPRS and SMS message data remote transmission Provides a serial port for communication via GPRS, text messages, and phone calls Ideal IoT solution for automotive, industrial, personal tracking, power environment, wireless POS, smart metering, and other projects with ultra-low power consumption Supports GSM/GPRS four bands: 850, 900, 1800, 1900 MHZ Supports voice calls, news SMS, and standard gsm07.04 Adds voice, text, SMS, and data capabilities to Arduino projects Communicates with microcontroller via UART port and supports command including GSM 07.07, GSM 07.05, and Ai-Thinker enhanced AT Commands Compact size and low current consumption with power-saving techniques Current consumption as low as 3mA in sleep mode Can be integrated into a great number of IoT projects such as M2M applications, industrial automation, BMS projects, home automation Applications: Remote System Monitoring Home Alarm System Remote Controlling System Security Access Control Vehicle tracking SMS Gateway

IoT:Bit- Internet WIFI Extension Board for Micro:Bit IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as a WIFI expansion board and serial port to communicate with Micro:Bit. It also has extended all available IO ports of the micro:bit which is led by GVS and you can extent various 3V E-blocks as LED, photosensitive, and servo by using it. At the same time, the IoT:bit with an on-board buzzer for outside sound and an onboard RTC clock for timing without power supply. Let's create your own IoT by make code!

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 4B 1GB / Raspberry Pi 4B (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded system and IoT. IOTIF trainer kit would set up the perfect stage for the graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browser from any part of the world. IOTIF Trainer Kit Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. On-Board Components of the IOTIF: The IOTIF training kit is integrated with the state of the art microcontrollers, development boards, wifi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 4B 1GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 3B / Raspberry Pi 4B (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded system and IoT. IOTIF trainer kit would set up the perfect stage for the graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browser from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also  check IOTIF - IOT Trainer Kit with Raspberry Pi 5 4GB . On-Board Components of the IOTIF: The IOTIF training kit is integrated with the state of the art microcontrollers, development boards, wifi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 4B x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Applications Engineering Students and Hobbyists College Projects and Capstone Work STEM Learning Labs and Educational Institutes Makers, Startups, and Innovation Labs Faculty and IoT Trainers Comparison Table: IOTIF vs Other IoT Kits Feature / Kit IOTIF – IoT Trainer Kit with Pi 4B 4GB Pro-Range Raspberry Pi IoT/Automation Kit RPI IoT Trainer Kit Core Controllers Raspberry Pi 4B (4GB) + Arduino Nano + ESP-01 Compatible with Raspberry Pi 4 (board not included) Raspberry Pi Zero or RPI-based modular controller Sensors & Actuators PIR, DHT11, ultrasonic, LDR, relay, stepper, servo, keypad, Bluetooth, GSM, GPS, camera module, etc. Relays, ADC module, sensors, power module, camera interface, basic automation sensors Keypad, joystick, RS232/RS485, LCD/OLED, motor driver, WiFi/Bluetooth Connectivity Options WiFi, Bluetooth, Ethernet, Cloud (MQTT, Thingspeak, Blynk), USB, GPIO expansion WiFi (via Pi 4), GPIO-based control, basic relay connections WiFi, Bluetooth, RS232, RS485, Modbus, MQTT Programming Platforms Supported Python, C/C++, Node-RED, Arduino IDE, Thonny Python, Node-RED, C/C++ Python, MQTT tools, Modbus software, C Learning Focus IoT fundamentals, sensor integration, edge computing, embedded systems, automation, cloud connectivity Basic IoT automation and Raspberry Pi interfacing IoT communication protocols, industrial data exchange, Modbus/MQTT learning Documentation & Support Comprehensive manual, circuit diagrams, example codes, and online tutorials Basic project documentation and wiring guides Detailed training manual, lab exercises, industrial examples Complexity & Learning Curve High – suitable for advanced students and institutions Medium – ideal for beginners and DIY learners Medium-to-High – focused on protocol-level understanding Expandability Highly expandable with extra GPIO pins, sensor ports, and Arduino-Pi hybrid integration Limited expansion; relies on Raspberry Pi 4 capabilities Moderate – supports external RS485/IoT devices Durability & Build Quality Premium metal casing with organized wiring and labeling DIY-style, breadboard-based setup Professional training board with protected circuit design Project Examples Supported Smart home automation, weather station, IoT data logger, surveillance camera, industrial monitoring Basic smart light or fan control, simple IoT automation Industrial device monitoring, IoT data gateway, smart communication systems Best Suited For Engineering colleges, STEM labs, startups prototyping IoT systems Hobbyists, beginner IoT learners Technical institutions teaching IoT communication and networking IoT Project You Can Build with IOTIF - IOT Trainer Kit with Pi 4B 4GB Smart Home Automation System IoT Weather Monitoring Station Smart Agriculture System IoT-Based Security & Surveillance System Smart Energy Meter IoT Data Logger Industrial Equipment Monitoring Health Monitoring System Smart Parking System Environmental Pollution Monitoring IoT Door Access Control System Voice-Controlled Home Assistant IoT Streetlight Automation Smart Waste Management System IoT Water Level Monitoring Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 5 4GB (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and the CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating the hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded systems and IoT. IOTIF trainer kit would set up the perfect stage for graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browsers from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also check IOTIF - IOT Trainer Kit with Raspberry Pi 5 8GB by ROBOCRAZE. It is an electronic trainer kit designed for educational purposes, particularly for engineering students. The kit includes three microcontrollers: Raspberry Pi 5 8GB, Arduino Nano, and ESP-01, along with various sensors and actuators like a Buzzer, LED, Ultrasonic sensor, and more. On-Board Components of the IOTIF: The IOTIF training kit is integrated with state-of-the-art microcontrollers, development boards, Wi-Fi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 5 4GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 5 8GB (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and the CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating the hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded systems and IoT. IOTIF trainer kit would set up the perfect stage for graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browsers from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also check Full Stack IoT Lab by Iotcart. It is currently on sale at a discounted price of Rs. 999,999, marked down from Rs. 1,500,000. The lab includes various components and modules for IoT and robotics development, such as ESP 32 modules, sensors, actuators, motors, 3D printer, smart home components, measurement instruments, and more On-Board Components of the IOTIF: The IOTIF training kit is integrated with state-of-the-art microcontrollers, development boards, Wi-Fi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 5 8GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Raspberry Pi 5 Active Cooler x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

IOTIF Neo - ESP32 IoT Starter Kit for Beginners The IoTIF Neo Beginner IoT Starter Kit is an all-in-one interactive platform designed to teach students the fundamentals of IoT (Internet of Things) using the powerful ESP32 microcontroller. With a rich set of onboard sensors, actuators, and breakout connections, students can quickly prototype and experiment with real-world IoT applications. This IoT project kit is tailored for school-level learning and hands-on workshops, providing an engaging experience that bridges theory and practice. Features: Onboard ESP32: Ready to use, with GPIOs broken out into convenient 4-pin and 8 pin connectors. Plug-and-Play Components: Sensors and actuators can be directly connected without soldering. Onboard Interactive Components: A variety of input and output modules to support dozens of experiments. Expandable Design: Support for external modules like ECO Tree, Color Eye, Traffic Signal, and Joystick. Beginner Friendly: Clear labeling, easy connectors, and breadboard integration for custom circuits. Manual with 35+ experiments. Why Choose IoTIF Neo IoT Kit? Educational Value: Designed specifically for school-level IoT learning. Hands-On Learning: Encourages students to tinker, experiment, and innovate. Future-Ready Skills: Introduces IoT, sensor interfacing, and basic coding in a structured manner. Expandable Ecosystem: Supports additional modules for advanced projects. Safe and Robust: School-friendly with clear labels and protected circuits. Onboard Components: Category Component Qty Inputs Push Button Matrix x1 Capacitive Touch Button x1 Potentiometer x1 Rotary Encoder x1 PIR Motion Sensor x1 LDR (Light Dependent Resistor) x1 Ultrasonic Distance Sensor x1 Outputs LED Matrix x1 RGB LED x1 Buzzer x1 OLED Display x1 Servo Motor Port x1 Relay Module for Actuation x1 Additional Onboard Features Mini Breadboard for Custom Circuits x1