Holybro M9N GPS with Standard Connector The Holybro M9N GPS with Standard Connector is a high-precision M9N GPS module designed for reliable positioning and navigation in drone applications. Utilizing the advanced u-blox M9N chipset, this GPS unit delivers fast satellite acquisition, improved sensitivity, and enhanced signal quality, making it ideal for demanding UAV projects. With its standard connector, it integrates seamlessly with popular flight controllers and power systems, ensuring consistent location tracking for autonomous missions, waypoint navigation, and stable hover performance. Built for both hobbyists and professional drone builders, this GPS module improves flight reliability by providing accurate latitude, longitude, altitude, and velocity data to your flight system. The standard connector simplifies installation and reduces wiring complexity, allowing for a clean and dependable setup. Whether you are developing high-performance multirotor drones, fixed-wing aircraft, or research UAVs, the Holybro M9N GPS enhances overall flight control and situational awareness. Features: High-precision M9N GPS module designed for accurate positioning and reliable navigation in drone applications. Uses an advanced GPS chipset for fast satellite acquisition and improved signal sensitivity. Standard connector ensures easy compatibility with popular flight controllers and UAV systems. Provides stable location, altitude, and velocity data for smooth and controlled flight performance. Compact and lightweight design suitable for multirotor, fixed-wing, and VTOL drones. Ideal for professional UAV projects, autonomous missions, and advanced hobbyist builds.

7Semi 1.27mm Pitch SHT41 Temperature & Humidity Sensor Breakout The 7Semi 1.27mm Pitch SHT41 Temperature & Humidity Sensor Breakout is a compact and high-performance sensing solution designed for modern embedded and IoT applications. Built around the advanced SHT41 Temperature & Humidity Sensor, it delivers precise environmental measurements with ±1.8% relative humidity accuracy and ±0.2°C temperature accuracy, ensuring reliable real-time data. Operating at 3.3V and consuming less than 0.15mA in low-power mode, this breakout board is optimized for long-term, battery-powered deployments. Its 16-bit digital output and flexible I2C communication with multiple address options allow seamless integration with popular microcontrollers, making it ideal for smart home systems, environmental monitoring, industrial automation, and portable electronics where accuracy, efficiency, and compact size are critical. Features: Sensing accuracy is ±1.8% RH (normal) in the 25%-75% range and ±0.2°C temperature, allowing for precise environmental observations. Ultra-Low Power Consumption: In low power mode, consumes less than 0.15mA, making it excellent for systems powered by batteries or limited electricity. The compact design features a 4-pin, 1.27 mm pitch header that allows for easy integration into dense PCB layouts. I2C Interface with Configurable Addresses: Simple to use using conventional I2C communication and pre-configured address settings. This technology has a wide range of applications, including intelligent buildings, IoT systems, industrial automation, smart homes, and environmental sensing. The temperature and humidity sensor is built using fourth-generation SHT40 digital sensor technology, ensuring long-term dependability and stability. Reliable Operating Range: Performs consistently from 0°C to 75°C under varying humidity levels.

7Semi BME680 Temperature, Humidity, Pressure & Air Quality Sensor Breakout with Qwiic Interface The 7Semi BME680 Environmental Sensor Breakout is a compact yet powerful module designed for applications that require accurate measurement of temperature, humidity, pressure, and indoor air quality. Built around the trusted Bosch BME680 sensor, it provides dependable multi-parameter environmental data in real time, making it ideal for IoT projects, smart home automation systems, and portable environmental monitoring devices. Its efficient gas sensor intelligently detects VOC levels, helping you assess indoor air quality with ease. Engineered for universal compatibility, this breakout includes both a voltage regulator and level shifter, enabling seamless integration with 3.3V and 5V microcontroller platforms such as Arduino and Raspberry Pi. The Qwiic connector and I2C/SPI support ensure quick setup without messy wiring, while its compact size makes it perfect for wearables and space-constrained builds. With low-power operation, stable readings, and selectable I2C addresses, this module provides developers with a simple and reliable way to enhance environmental sensing in modern embedded projects. Features: Provides accurate measurement of temperature, humidity, pressure, and VOC-based air quality, making it an all-in-one environmental sensor solution. Supports I2C and SPI communication, ensuring smooth integration with Raspberry Pi, Arduino, ESP32, and other development boards. Includes selectable I2C addresses (0x76/0x77) to allow multiple sensors on a single bus without conflicts. Features a built-in voltage regulator and level shifting circuitry, allowing safe use with both 3.3V and 5V systems. Designed with low power consumption, suitable for long-term, battery-powered, or portable applications. Comes in a compact 19×19 mm breakout form factor, perfect for handheld devices, IoT wearables, and mini weather stations. Provides stable VOC readings after a short burn-in time, ensuring reliable indoor air quality measurements.

DFRobot Gravity CAN to TTL Communication Module with SLCAN Protocol The Gravity: CAN to TTL Communication Module is a powerful solution that bridges the gap between CAN bus and UART/USB interfaces. Supporting the CAN 2.0 protocol and incorporating SLCAN commands, this module simplifies complex CAN communications into easy-to-use AT commands. You don't need to worry about the technical details of the CAN protocol - just send simple commands to transmit data and configure the module. With compatibility for both 3.3V and 5V systems, this versatile module fits seamlessly into various project requirements without additional level shifters. This CAN bus converter features both UART and integrated USB 1.0 interfaces, eliminating the hassle of USB-to-UART conversions during debugging. Simply connect it to your computer via USB for convenient data testing through a serial assistant. The module offers configurable CAN baud rates from 25K to 1Mbps and can handle up to 500 data packets per second without loss, ensuring reliable communication for your projects. With helpful features like data communication indicators and a 120? resistor jumper, this SLCAN protocol module streamlines development and troubleshooting for students, hobbyists, and professional engineers working with CAN bus systems. Features Supports CAN 2.0 protocol for wide compatibility Dual interface with both UART and USB 1.0 connections Compatible with 3.3V and 5V voltage levels Configurable CAN baud rates from 25Kbps to 1Mbps Default UART baud rate of 115200Bps Maximum transmission rate of 2ms per packet Handles 500 data packets per second without loss Includes data communication indicator for easy monitoring Features 120? resistor jumper for proper CAN bus termination Configuration parameters saved even when power is disconnected Connection Diagram of Gravity: CAN to TTL Communication Module and ESP32-E

SmartElex 2 Channel CAN HAT The SmartElex 2 Channel CAN HAT is a high-performance dual-channel CAN bus HAT for Raspberry Pi that enables reliable CAN communication with ECUs, motor controllers, sensors, and industrial devices. Built using two MCP2515 CAN controllers and TJA1050 CAN transceivers, this Raspberry Pi CAN communication interface supports data rates of up to 1 Mbps, ensuring fast and stable message exchange. The HAT features configurable 120Ω termination resistors, onboard LED indicators, extended temperature support, and built-in ESD protection for dependable operation in rugged environments. Its compact, stackable form factor makes it an ideal 2 Channel CAN HAT solution for automotive diagnostics, robotics control, and industrial automation projects. Features: Dual separate CAN channels. Built-in MCP2515 controller (SPI interface). TJA1050 CAN transceivers provide robust signal output. Compatible with all 40-pin Raspberry Pi boards. 120Ω termination resistors (user-configurable). Onboard TX/RX LEDs for status indication. Supports up to 1 Mbps signaling rate. Industrial-grade temperature and ESD protection

Cytron Maker Reflect IR Reflectance Sensor for Beginner The Cytron Maker Reflect IR Reflectance Sensor is a compact and beginner-friendly module designed to help learners understand how infrared reflectance works in robotics and automation. Using an IR LED and a high-sensitivity phototransistor, it measures how much IR light bounces back from a surface and generates an analog voltage that’s easy for any microcontroller to read. This makes it perfect for exploring concepts like surface detection, black-and-white line following, and reflectivity measurement. Designed by Cytron with simplicity in mind, this sensor is ideal for kids, students, and makers stepping into DIY robotics projects. Its ultra-small size and centered mounting hole allow it to fit even in tight robot designs, while its 3.3V and 5V compatibility ensures smooth use with Arduino, Raspberry Pi, and all common controllers. Whether you're building a line follower, Sumo bot, maze robot, or encoder-based mechanism, the Maker Reflect delivers reliable IR performance with minimal setup. Features: Works as a hands-on IR reflectance sensor that uses an IR LED + phototransistor to measure surface reflectivity for reliable detection. Helps beginners learn analog sensing, line detection, object presence, and robot navigation, building strong STEM fundamentals. Built with safe, durable Cytron components, ensuring stable performance even in beginner-level DIY robotics projects. Fully compatible with 3.3V and 5V systems, making it easy to interface with Arduino, Raspberry Pi, microcontrollers, and robotics platforms. Offers a sensing distance of 1mm to 40mm at 5V (ideal for black/white surface detection and line following). Provides analog voltage output, allowing smooth interpretation of different surface colors and reflectivity. Compact size of 18.1mm × 8.4mm × 4.2mm, with a centered mounting hole for accurate positioning at the front of robots. Suitable for school projects, robotics clubs, and maker experiments - perfect for line followers, Sumo robots, maze solvers, and encoder wheels. Makes a great STEM learning gift for young robotics enthusiasts and beginners exploring IR sensors.

SmartElex PCA9546 4-Channel I2C Multiplexer Compatible with TCA9546A SmartElex PCA9546 4-Channel I2C Multiplexer is designed to simplify communication management when working with multiple I2C devices that share the same address. This compact module helps prevent signal conflicts by allowing users to connect and control up to four separate I2C buses from a single master device. It’s an ideal solution for students, makers, engineers, educators, and startups who are building projects where multiple sensors or modules need to coexist without addressing limitations or communication errors. Compatible with popular development platforms like Arduino, Raspberry Pi, and ESP32, this PCA9546 I2C multiplexer works as a practical I2C bus expander for robotics, IoT systems, automation projects, and prototype development. It offers a stable, plug-and-play approach to expanding I2C networks, making it easy to integrate sensors, displays, and controllers into both simple and advanced builds. Whether you are creating a multi-sensor environment, debugging complex circuits, or scaling an existing project, this module provides clear routing and dependable performance to streamline development. Features: Enables connection of up to four independent I2C device channels Prevents address conflicts by isolating I2C buses when needed Based on PCA9546 IC and compatible with TCA9546A devices Ideal for expanding I2C networks in multi-sensor projects Works with Arduino, Raspberry Pi, ESP32, and similar controllers Simple control through I2C commands for channel selection

7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe The 7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe is built for anyone who needs precise and stable temperature monitoring in challenging environments. With its stainless-steel sealed casing and durable 2-meter cable, this sensor delivers highly accurate readings, even when fully submerged or installed in remote locations. Whether you're monitoring aquaponics systems, greenhouse conditions, or industrial temperature processes, this digital probe ensures you get consistent and reliable data every single time. Designed with a simple 1-Wire digital interface, the DS18B20 works seamlessly with Arduino, Raspberry Pi, ESP boards, and other microcontrollers, making it ideal for hobbyists, engineers, and automation enthusiasts. Its long cable, waterproof build, and wide temperature range make it a versatile choice for environmental monitoring and precision-driven applications where stability and robustness matter the most. Features: Measures temperatures from –55°C to +125°C, making it suitable for industrial, environmental, and underwater applications. Provides ±0.5°C accuracy, ensuring stable and trustworthy readings. Fully waterproof stainless-steel enclosure protects against moisture, corrosion, and rugged terrain. Comes with a 2-meter high-strength cable to support remote, underwater, or difficult-to-access installations. Supports 9–12 bit resolution and easily integrates using its 3-wire connection and 1-Wire digital protocol.

7Semi BME688 Environmental Sensor Breakout with Gas, Temperature, Humidity & Pressure Monitoring The 7Semi BME688 Environmental Sensor Breakout is a next-generation module designed for creators, engineers, and researchers looking to capture highly accurate environmental data in one compact board. Built using Bosch Sensortec’s advanced technology, it measures temperature, humidity, barometric pressure, and a wide range of gases - including VOCs, VSCs, CO, and hydrogen. With AI-enabled gas scanning, this sensor offers unmatched flexibility and precision, making it ideal for air quality monitoring, IoT devices, and smart home automation. This tiny board brings premium reliability, fast response times, and long-term stability to any embedded setup. Thanks to support for both I2C and SPI interfaces, the BME688 integrates easily with platforms like Arduino, ESP32, and Raspberry Pi. Whether you’re building an indoor air quality tracker, creating a wearable environmental sensor, or developing research-grade monitoring equipment, this module delivers the depth of data you need. With intelligent gas detection powered by machine learning and a wide operating range, the BME688 excels in environmental sensing, embedded electronics, and modern IoT applications without adding bulk or complexity. Features: Delivers 4-in-1 sensing capabilities with precise measurement of temperature, humidity, atmospheric pressure, and multiple gases in a single compact module. Features AI-enabled gas scanning that detects VOCs, VSCs, carbon monoxide, hydrogen, and other gases using machine-learning-based profiling. Provides high accuracy, low drift, and rapid response speeds for dependable long-term environmental monitoring. Offers flexible integration with both I2C and SPI interfaces for seamless compatibility across microcontrollers and embedded systems. Compact, lightweight design makes it suitable for portable devices, IoT deployments, smart home systems, and environmental research setups. Allows custom tuning of sampling rates, power consumption, and gas sensitivity for specialised applications. Backed by Bosch Sensortec’s reputation for durability, ensuring stability and reliable performance in continuous operation. BME688 4-in-1 Air Quality Sensor Breakout Dimensions: BME688 4-in-1 Air Quality Sensor Breakout Pinouts:

SmartElex Ebyte E103-W20(7628) WiFi Breakout Board The SmartElex Ebyte E103-W20(7628) Wi-Fi Breakout Board is a compact Wi-Fi module designed to add wireless connectivity to embedded systems and IoT applications. It enables devices to connect to networks for remote monitoring, data transfer, and cloud-based control, without the need for complex networking hardware. This makes it a practical solution for students, makers, engineers, educators, and startups building connected projects or learning how to integrate Wi-Fi into electronic systems. This Wi-Fi module is ideal for use in IoT prototypes, home automation systems, robotics, industrial monitoring, and smart consumer products. It works smoothly with platforms like Arduino, Raspberry Pi, and ESP32, allowing quick setup and integration for testing or deployment. With stable wireless performance and a developer-friendly breakout design, the SmartElex E103-W20(7628) is a reliable choice for prototyping, DIY builds, and early-stage product development that requires dependable Wi-Fi communication. Features: Wi-Fi module for adding reliable wireless connectivity to projects Supports network-based control, monitoring, and data exchange Compact breakout board for fast prototyping and development Easy integration with Arduino, Raspberry Pi, and ESP32 platforms Ideal for IoT systems, smart home automation, and robotics Suitable for students, hobbyists, and early product development

7Semi SGP41 VOC Sensor Breakout Board for Indoor Air Quality Monitoring The 7Semi SGP41 VOC Sensor Breakout Board is a compact and reliable solution for monitoring indoor air quality with high precision. Built around Sensirion’s advanced SGP41 sensing technology, this VOC Sensor accurately detects volatile organic compounds, helping assess air freshness and pollution levels in real time. Operating at an exact 3.3V and communicating via an I2C interface, it integrates smoothly with popular microcontrollers and development boards. The onboard Qwiic connector simplifies wiring, making this air quality VOC sensor ideal for applications such as air purifiers, HVAC systems, smart buildings, and long-term environmental monitoring where accuracy and stability matter. Leverage the power of the SGP41 to create innovative air quality solutions. Whether you're developing air purifiers, ventilation systems, or environmental monitoring devices, this sensor breakout is your essential component. Features: Sensirion SGP40 Sensor: Provides accurate VOC and NOx detection for better air quality assessments. The Digital I2C Interface simplifies communication and integration with your system. Robust Construction: Designed to endure real-world situations while maintaining long-term stability. Compact design is ideal for applications that require limited space. Easy integration: Solderable headers allow for a simple connection.

SmartElex NS412 Digital PIR Motion Sensor Module The SmartElex NS412 PIR Motion Sensor is a compact NS412 PIR Motion Sensor module designed for accurate human body detection in electronic and automation projects. It helps users detect movement by sensing changes in infrared radiation, making it useful for security, energy saving, and smart control applications. This human body detection module is suitable for students, makers, educators, engineers, and startups who want a simple and reliable way to add motion sensing to their projects. The sensor works smoothly with popular platforms such as Arduino, Raspberry Pi, and ESP32, allowing easy integration into robotics, IoT devices, and automation systems. Its stable digital output makes it ideal for applications like smart lighting, intrusion detection, occupancy sensing, and DIY prototypes. With easy interfacing and dependable performance, this module enables developers to quickly build motion-based solutions for real-world use. Features: Accurate motion detection using infrared sensing technology Designed for reliable human body detection applications Digital output for easy connection with microcontrollers Compatible with Arduino, Raspberry Pi, and ESP32 boards Low power operation suitable for continuous monitoring Ideal for security systems, smart lighting, and automation projects

SmartElex Ai Thinker Ai M62 32S Development Kit The SmartElex AI Thinker Ai-M62-32S Development Kit is a powerful and versatile solution designed for modern wireless and IoT applications. Built around the BL616 RISC-V CPU, it delivers high performance with a maximum operating frequency of 320 MHz, making it suitable for real-time data processing and edge computing. This AI thinker modules platform supports Wi-Fi 6, BLE 5.3, and Thread protocol, ensuring fast, stable, and low-power connectivity. The Ai-M62-32S Development Kit features a wide range of interfaces including USB 2.0, SPI, UART, I2C, I2S, PWM, ADC, DAC, and GPIO, enabling seamless integration with sensors, displays, and peripherals. With built-in hardware security engines supporting AES, SHA, PKA, and TRNG, along with secure boot and encrypted firmware startup, it meets strict security requirements for IoT deployments. This makes the Ai-M62-32S Development Kit an excellent choice for smart home systems, wearable electronics, multimedia devices, and next-generation IoT solutions. Features: Supports the 2.4GHz operational frequency band. Support IEEE 802.11 B/G/N/AX. Support BLE 5.3. Wi-Fi Security Support WPS/WEP/WPA/WPA2/WPA3 Supports 20/40MHz bandwidth, 1T1R, maximum rate of 229.4 Mbps Supports STA, SoftAP, STA+SoftAP, and sniffer modes. A 32-bit RISC-V CPU with FPU and DSP has a maximum dominant frequency of 320M. 532KB SRAM, 128KB ROM, 4KB eFuse. Supports USB2.0, SDU, SD/MMC (SDH), SPI, UART, I2C, I2S, PWM, GPDAC, GPADC, ACOMP, and GPIO, among others.

ACEBOTT QD108 FootBall Arena Kit For TinkerBott V1.1 The ACEBOTT QD108 Football Arena Kit for TinkerBott V1.1 is an engaging and interactive robotics playground designed to bring fun, competition, and learning together. Specifically created for the TinkerBott V1.1 platform, this football arena set lets users build, program, and control robots to play dynamic football matches. With modular components and easy assembly, the QD108 kit enhances STEM learning, encourages teamwork, and provides a hands-on way to explore robot movement, strategy, and coding in action. Features Football Arena Setup – Includes all parts needed to build a complete robotic football arena for exciting match play. Modular Design – Easy to assemble and reconfigure, perfect for classrooms, competitions, and home activities. Enhances STEM Learning – Combines robotics, coding, and team strategy for an educational play experience. Designed for TinkerBott V1.1 – Seamlessly integrates with the TinkerBott robot platform for smooth performance. Encourages Creativity & Fun – Lets users develop game tactics, program robot behaviors, and compete in challenges. Perfect for Group Activities – Ideal for clubs, classes, and family projects where teamwork and robotics meet.

ACEBOTT QD107 AI Vision For TinkerBott Car V1.1 (Car Kit is Not Included) ACEBOTT QD107 AI Vision Module for TinkerBott Car V1.1 enhances your robot with smart image recognition, object tracking, and AI-powered interaction capabilities. Built around an ESP32 camera system, this upgrade allows students and makers to explore computer vision, machine learning, and intelligent robotics in a hands-on way. Whether used in STEM classrooms or home robotics projects, the QD107 adds exciting new functionality to the TinkerBott platform, making coding and learning more engaging and interactive. Features AI-powered vision module enables object detection, recognition, and tracking. Built-in ESP32 camera provides fast image processing and wireless communication. Plug-and-play upgrade designed specifically for TinkerBott Car V1.1. Supports multiple programming platforms, making it ideal for beginners and advanced learners. Enhances STEM learning with hands-on experience in computer vision and AI robotics. Lightweight and modular design allows easy installation without affecting robot mobility.