RDS3115MG 15KG Large Torque 180 Degree Servo Motor with Brackets  This is a high-performance standard digital servo used for RC robots with low operating noise, You can control this servo motor with Arduino which is connect by jumper wires and powered by battery. It has an operating voltage of 4.8-7.2VDC.  Equipped with strong copper & aluminum gears, CNC aluminium middle Shell. Professional servo kit easy to design and do all kinds of robot DIY

60kgcm Metal Gear Servo Motor Ultra Torque Quarter Scale The Ultra Torque Quarter Scale 60kgcm Metal Gear Servo Motor is a great choice for your projects! This strong and waterproof SSG metal geared servo motor gives you excellent performance, with 58kg/cm at 6V and 65kg/cm at 7.4V. It works well for many things, like airplanes, helicopters, BAJA cars, RC cars, and other RC models. Features Durable all metal gear Programmable digital amplifier with soft drive Stable dual ball bearing design Bottom side axial mount hole Compatible with Futaba, JR, and Hitec systems Original factory product Low noise operation Operating angle: 180 degrees Maximum orientation angle: 180 or 270 degrees Package Includes: 1 x 60kgcm Metal Gear Servo Motor 1 x Accessories Set Specifications: Specification Details Item Type Generic Servo Motor Torque Rating (kg-cm) 58 to 70 Operating Voltage (VDC) 6 ~ 8.4 Operating Speed @6V 0.17 sec/60 degrees Operating Speed @7.4V 0.15 sec/60 degrees Operating Speed @8.4V 0.13 sec/60 degrees Stall Torque @6V (Kg-Cm) 58 kg.cm Stall Torque @7.4V (Kg-Cm) 65 kg.cm Stall Torque @8.4V (Kg-Cm) 70 kg.cm Operating Temperature (°C) -15ºC to 70ºC Storage Temperature (°C) -30ºC to 80ºC Cable Length (cm) 32 cm Dead Zone Setting 3 µs Gear Type Metal Required Pulse 500 µs - 2500 µs Length (mm) 65 mm Width (mm) 30 mm Height (mm) 48 mm Weight (g) 160 g

DIY Acrylic Robot Manipulator Mechanical Arm Kit Ready for an electrifying journey into robotics? Check out our DIY Acrylic Robot Manipulator Mechanical Arm Kit! Crafted with precision and passion to bring your robotic dreams to life.Our mechanical robotic arm kit is made from high-quality acrylic, so it's tough and looks great. This robot arm kit works smoothly with SG90 micro servo and gives you precise control. The claw attachment lets you grip surfaces firmly which makes this robot arm kit easy to handle objects smoothly and accurately. Our Acrylic Robot Kit is perfect for learning Arduino programming and control theory. It's great for guests or students, giving hands-on experience in building and programming robotic arms. This Arduino robotic arm kit sparks curiosity and creativity in enthusiasts and students. Whether you're a seasoned robotics enthusiast or a curious beginner, our DIY Acrylic Robot Manipulator Mechanical Arm Kit is perfect for you. Don't miss out on the opportunity to revolutionize your robotics experience with our Acrylic Robot Kit in India. Order your Arm kit today from Iotcart and take the first step toward a future filled with innovation and excitement!Note: The robotic arm kit does not include a servo, it must be purchased separately. Package Includes: 1 x DIY Acrylic Robot Manipulator Mechanical Arm Kit Specifications: Material Acrylic Compatible Servos SG90 Length (mm) 75 Width (mm) 110 Weight (g) 65

40Kgcm High Torque Servo Motor (S8218) The 40Kg-cm Servo Motor (S8218) is a well-designed and high-quality servo that is digital, and fitted with metal gears for reliability. This is a digital servo motor for a wide range of applications that requires high torque. You can control this servo motor with Arduino which is connect by jumper wires and powered by battery. The metal gears ensure long life and torque conversion. It is made of high-quality material, which may make your operation much more remarkable. This product is a metal gear high torque servo motor. This Motor is compatible with Futuba, JR, Sanwa, and Hitee series. The speed rate is 0.20--0.22sec/60°at (6V). 0.18--0.2sec/60°at (7.2V). Applications: Solar array and antenna positioning Automatic doors Remote control toys DIY Robotic Projects read our blog explaining servo vs dc motor(the Difference Between Servo Motor vs DC Motor). Package Includes: 1 x 40Kg-cm Servo Motor (S8218) Specifications: Operating Voltage 6 - 7.4V Speed 0.20 -0.18s/60deg Torque 36kg-38kg/cm Size 59.5X29X55.2mm Weight 164gm

MG995 High Speed Servo Motor(180 Degree) The TowerPro MG995 High-Speed Digital Servo Motor rotates 90° in each direction making it a 180° servo motor. It receives and processes PWM signals faster and better. You can control this servo motor with Arduino. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces. This TowerPro MG995 Metal Gear Servo Motor provides a high torque of 10 kg/cm (4.8V) and 12 kg/cm (6V). It equips a 3-wire JR servo plug which is compatible with Futaba connectors too.

2 Axis Pan Tilt Brackets This is 2 Axis Pan Tilt Brackets For Camera/Sensors for Servo motors SG90S MG90S which is based on 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on robot assembly. Panning, rolling and tilting is achieved by controlling Servo motors using PPM pulses. Suitable for DIY panning and tilting application in projects. Supports a varied array of sensors and measurement device for different project applications.

MG90S Mini Servo Motor(180 Degree) The MG90S Mini Servo Motor(180 Degree) is designed for a wide range of applications, this compact motor provides an impressive 2.2kg/cm of torque, combined with rapid response times which makes it an excellent choice for working on RC planes, robotic arms, microrobots, and more. Its compact design allows it to fit into even the tightest of spaces seamlessly. The MG90S is also known for its reliability for its water and dust-resistant construction. With a 3-wire JR servo plug it is compatible with Futaba connectors. Operating efficiently within the voltage range of 4.8-6.6V, it delivers swift and precise movements with an operating speed of 0.1sec/60degree at 4.8V and 0.08sec/60degree at 6V. Get precise control in your projects with the 180 Degree MG90S Mini Digital Servo Motor.   Also check our servo motor collection page, which features a variety of motors and related accessories.

MG958 Servo Motor The TowerPro MG958 High-Speed Digital Servo Motor, It is a Digital Servo Motor that receives and processes PWM signals faster and better. You can control this servo motor with Arduino which is connect by jumper wires and powered by battery. MG958 Servo Motor equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces. These TowerPro MG958 Metal Gear Servo Motors are high-speed servo motors with a mighty torque of 18 kg/cm. This high torque servo motor is packed within a tight sturdy plastic case which makes them water and dust-resistant which is a very useful feature in RC planes, Boats, RC Monster Trucks, etc. It equips a 3-wire JR servo plug which is compatible with Futaba connectors too. check out : VTS 08A Servo Motor (5 Kgf.cm Torque)

4.8-6V Servo Motor Tester The Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servo motors or ESC by connecting it to the battery or power supply. This servo tester can connect to up to 3 servos simultaneously. You can also connect up to 3 ESCs to test and compare their reaction time respectively.  This unit can be used in 3 modes Manual - you can move the servos and check the throws manually by turning the knob. Neutral - servos are automatically set to neutral position (great of heli flyers). Auto - this mode operates the servos and moves the servos to their extreme position automatically.

PCA9685 16 Channel Servo Motor Driver(Soldered) This is 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685. You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now? You could give up OR you could just get this handy PWM and Servo driver breakout. Programmable fuzzy group (dim) / Flashing LED brightness independent mixed with 1MHz Fast-mode Plus is compatible with high drive capability has 30mA on SDA I2C bus interface to drive a highly capacitive bus. Each LED output can be achieved from the fully closed (the default) to 4096 (12) between the maximum brightness linear programmable brightness. Software programmable open-drain LED output selection (the default is a push-pull) of 16 push-pull outputs (at 5V 25mA sink can absorb and provide 10mA current draw), no input function. Programmable output state is in response to an order to change or stop to achieve simultaneously update all outputs or by-byte (byte-by-byte) update output (default is “Stop command to change”). Effective low output enable input pin when the pin is high, the LED output can be programmed to 0,1 or tri-state (high impedance power-on default). 6 hardware address pins so that the same can be connected to 62 PCA9685 I2C devices on the bus. LED output frequency (all LED) is typically 40Hz to 1000Hz (When the oscillator is 25MHz, the prescaler register default value 1EH 200Hz refresh rate will generate a). 4 software programmable I2C bus address (an LED group call (Call) address and three sub-LED call (Call) address) such that the device can be set in any combination to be addressed at the same time (e.g., a register used for ” All calls (All Call) “then all PCA9634 devices on the I2C bus can be addressed at the same time, while the second register for three different addresses, then a device group. 1/3 bus devices can be addressed at the same time), you can enable and disable the software I2C bus address. If you want to control the servo motors with this 16-channel servo motor driver, for that you will need a few essential components like  Arduino, jumper wires, batteries or power supply.   Connection diagram for interfacing 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685 with Arduino UNO:

4.3 Kgf-cm Servo Motor (ES3001) This is ES3001 servo motor, This servo motor has an operating voltage of 4.8V~6.0V, It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces, You can control this servo motor with Arduino which is connect by jumper wires and powered by battery. read our blog explaining the difference between servo motor and dc motor, which provides a detailed comparison between servo motors and DC motors. Applications: RC Airplane RC Glider RC Car  Package Includes: 1 x 4.3 Kgf-cm Servo Motor (ES3001) Specifications: Operation Voltage 4.8 - 6Volts Temperature Range 0-55C Stall Torque (4.8V) 3.2kg/cm Stall Torque (6.0V) 4.2kg/cm Weight 37gm

Futaba S3003 Servo Motor with 3.2Kgcm Torque For Robots Arduino The Futaba S3003 Standard 3.2 kgcm Torque Servo Motor is an excellent multi-purpose standard-size high reliability servo motor that can be easily converted to continuous rotation. Because they have plastic gearing, they are not suitable for high-impact applications, but they are an excellent choice for beginners - ideal for moving robotic arms through a specific range or steering a rover! you can control this servo motor with Arduino with the connection of jumper wires and  battery. The unit includes a 30cm wire and a 3 pin 'S' type female header connector that will fit most receivers. This servo can rotate about 180 degrees (90 degrees in each direction), but it can be modified for full rotation, and it comes with a variety of horns and hardware to suit most applications! You can control these servos with any servo code, hardware, or library, making it ideal for beginners who want to make things move without building a motor controller with feedback and gear box, especially since it will fit in small spaces. They are ideal for use with the 16 Channel Servo Driver and other Raspberry Pi Motor Controllers. Key

PCA9685 16 Channel 12 Bit Servo Motor Driver This is the PCA9685 16 Channel 12 Bit Servo Motor Driver, With just two pins, you can control 16 free-running PWM outputs. Do you want to build a robot or a hexapod walker? Perhaps you're creating a work of art with many moving parts, or you need to drive a large number of LEDs with precise PWM output. Your microcontroller has a limited number of PWM outputs, and you're almost out! Do you require more than 16 PWM outputs? No worries. Chain up to 62 of these beauties together for a total of 992 PWM outputs. This is an I2C-controlled PWM driver with an integrated clock. That means you don't have to send it to signal all the time, tying up your microcontroller; it's completely free to run! It is 5V compliant, which means it can be controlled by a 3.3V microcontroller while driving up to 6V outputs safely. This is useful when controlling white or blue LEDs with forward voltages of 3.4 or higher. There are six address select pins, allowing you to connect up to 62 of these to a single I2C bus for a total of 992 outputs. If you want to control the servo motors with this 16-channel servo motor driver, for that you will need a few essential components like Arduino, jumper wires, batteries or power supply.

Xarm 1S Hiwonder Intelligent Bus Servo Robotic Arm for Programming With the Xarm 1S Amazing Smart Bus Servo Robotic Arm, discover your creative potential! As a roboticist, hobbyist, or instructor, this amazing robotic arm can help you in bringing your ideas into reality. Discover the worlds of object transportation, remote control grabbing, and graphical programming with ease. The Xarm 1S is driven by six accurate intelligent serial bus servos that provide high torque and real-time feedback on position, voltage, and temperature. This robotic arm can handle things weighing up to 500 grams, making it suitable for a variety of applications. The Xarm 1S is made of high-quality aluminum alloy, which ensures longevity and stability. You'll like the variety of control choices, such as PC, phone app, mouse, and wireless PS2 handle, which allow you to pick the best technique for your needs. Creating sophisticated motions and programming is simple with the Xarm 1S. You may utilize the user-friendly interface on your PC, app, or offline manual editing to create configurable actions. The Xarm 1S allows you to improve your coding abilities, learn about bionic robotics, and bring your designs to reality. Prepare to fire your imagination! Package Includes: 1x Xarm 1S Hiwonder Intelligent Bus Servo Robotic Arm for Programming 1 x 8V DC Adapter 1x USB Cable 1x Remote Controller Specifications: Language English Model Number Xarm 1S Number of Pieces 1 Assembly Required Yes Batteries Required No Batteries Included No Material Type Metal Remote Control Included Yes Colour Blue Product Dimensions 15.49 x 13.97 x 24.59 cm Weight 1.1 kg

1501MG Metal Steering Gear Power HD's 1501MG metal-geared analogue servo delivers extra-high torque normally associated with much more expensive or larger servos. Servo horns and the necessary hardware are included. The 1501MG is a powerful standard-size servo with metal gears and two ball bearings that can deliver a surprising amount of torque for such a small servo. The 1501MG servo motor operates on standard RC servo pulses, with a running angle of approximately 165° over a servo pulse range of 800 s to 2200 s, and a 10′′ (25 cm) cable terminated with a standard JR-style connector that is Futaba-compatible. read our blog explaining the comparison of servo motor vs dc motor. Package Includes: 1 x 1501MG Metal Steering Gear Specifications: Operation Voltage 4.8 - 6Volts Rotation angle 180 degree Stall Torque (4.8V) 15.5kg/cm Stall Torque (6.0V) 17kg/cm Weight 63gm