Smart Cutebot Kit for Micro:Bit Smart Cutebot kit is a rear-drive smart car driven by dual high-speed motors. There are many on-board types of equipment on the Cutebot including an ultrasonic sensor and distance sensor, two RGB LED headlights and clearance lamps on the bottom, two line-tracking probes, an active buzzer as the horn and so on! Let’s drive your first smart car! Applications of the Smart Cutebot Kit: Line Following Robot Distance Tracking Robot Light Show Ultrasonic Obstacle Avoidance  Wireless Remote Control Seeking the light Package Includes: 1 x Cutebot Car 1 x Battery Holder 1 x HCSR04 Ultrasonic Sensor  1 x Line Tracking Map 1 x Brochure Specifications:   Working Voltage  3V - 5V Infrared Controls  Connect to P16 Dimensions  8.5 x 8.5 x 3.8cms  Weight  100 grams

Smart AI Lens Kit for Micro:Bit The Smart Artificial Lens Kit is designed for best compatibility with BBC Micro:Bit. These smart AI lens kits are designed with a protective shell that provides more service life and a protective screen layer. They are durable and shatter-resistant and therefore are best used by school kids who are interested in science and technology. The smart lens kit features 90 degrees wide-angle lens. It has an ultra-wide-angle of view that can take a full image of the recognized object. It is easy to connect and no need for a power supply.  Package Includes: 1 x AI Lens   1 x RJ11 Connection with wire 200mm 1 x Red and Blue Balls 1 x RJ11 to Dupont connection wire 41 x Cards Specifications: Core  K210 Lens  90 Degrees Wide Angle  Resolution  240 x 240  Screen  1.3 inch  Communication Protocol  IIC  Dimensions  9.2 x 14.5 x 4cms  Weight  50 grams

Smart Science IoT Kit compatible with Micro:Bit Smart Science IoT Kit is developed based on Micro: Bit, a new breakout board compatible with science sensors such as the ultrasonic sensor, dust sensor, light sensor, and water level sensor, including RTC Timing and WIFI module. You can gather data via the sensors and send data to the cloud with more stable and accurate data analysis. IoT: bit is an expansion board based on IoT for micro: bit IoT: bit is an expansion board based on IoT for micro: bit, it can support the sensors in 3-pins, the actuator, and the buzzer, it can also give a specific time telling even the micro: bit powers off with the RTC onboard. It uses ESP8266 as a WIFI expansion board and serial port to communicate with micro: bit. It also has extended all available IO ports of the micro: bit which is led by GVS and you can extend various 3V E-blocks as LED, photosensitive, and servo by using it. At the same time, the IoT: bit with an onboard buzzer for outside sound and an onboard RTC clock for timing without a power supply. The codebase for makecode can connect to Thingspeak conveniently and create your IoT project quickly. Micro: bit Smart Science IoT kit: Sensors Introduction   Applications: Application Layer: Receiving usage data, after data analysis, reacting, and giving instructions to each device. Network Layer: Send messages to the host in the cloud via web technology. Perception Layer: Objects detect changes in the external environment and receive various messages through the identification system and sensing technology. Package Includes: IoT Bit x 1 Dust Sensor x 1 Sonar: Bit x 1 OLED Display x 1 Soil Moisture Sensor x 1 Water Level Sensor x 1 BME280 x 1 Noise Sensor x 1 PIR Sensor x 1 Light Sensor x 1 180 Servo Motor x 1 GVS 3-Pin Dupont Wires x 9 USB Cable x 1 Guidance Manual x1

BBC Micro:Bit v2.2 Starter Kit The Micro:Bit v2.2 starter kit consists of Micro:Bit, micro:bit battery, battery holder, USB cable, jumper wires, alligator clips, breadboard, T- shape Expansion GPIO board and Micro:Bit case. This BBC Micro:bit starter kit is very useful and helpful for kids who are interested in getting started with technology. Package Includes: Micro Bit Go V2.2 x 1 Silicone Case x 1 T-Type GPIO Expansion Board x 1 400 Pin BreadBoard  x 1 Crocodile clip  x 10 Jumper wire ( all 3 type 20 each) x 60 Dimensions  15 x 11 x 9cms Weight 100 grams   Tutorial to get started with BBC Micro:Bit Here is a tutorial of a BBC Micro:Bit based project that you can start with. We have given step by instruction on how to develop a device that can count your steps with the help of BBC Micro:Bit. You can also check out our video below for the same. This is just the small possibility of using a BBC Micro:Bit board. The project ideas are limited by only your imagination.