Guide Rail for M5 Base Guide Rail is a guide rail expansion base suitable for the M5Base series. The bottom is a spring-type guide rail buckle structure, and multiple M3 screw holes are provided to provide flexible fixed installation options. Package Includes: 1x Guide Rail fixed base Specifications: Dimensions 80 x 51 x 7mm Weight 25gm

M5 Stack Mini 3A Relay Unit RELAY as it says is an M5Unit that implements Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch, where it is necessary to control a large power load circuit by a separate low-power signal such as digital signal output from a microprocessor.The Relay support input voltage of up to 30V DC and 220V AC.There are 3 pins named: ON, OFF, COM. You can program to make COM connect to ON or OFF, just by high and low output of a digital GPIO. Applications: Remote control of high-power appliances, such as refrigerators, air conditioners, TVs, etc. Also check the M5 Stack Grove-T Connector, which comes in a package of 5 pieces. It is a T-shaped hub called CONNEXT-T, used for CONNEXT port expansion. Also check M5 Stack 1 to 3 HUB Unit. The HUB Unit is a device that allows you to connect more GROVE ports to your M5Stack device. This is useful if you want to use multiple sensors or other devices at the same time.  Package Includes: 1x RELAY Unit1x Grove Cable1x 3.96 socket Specifications: Dimensions 48 x 24 x 21mm Weight 26gm

M5 Stack 1 to 3 HUB Unit HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different I2C addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to limited amount of grove ports)Note: HUB is just a hardware expander, if you are looking for a hardware and software (standard protocol) expander like I2C, Single-bus, please check PaHUB or PbHUB.If you are connecting two I2C slave devices onto HUB that share the same address, you will have a problem getting I2C data from both. The I2C addresses of the devices must be different, they can be changed manually by changing the resistor values. Also check M5 Stack Solid State Relay Unit(BT136S). The unit is a small, single-phase AC relay that can be controlled with a DC signal. It has built-in optocoupler isolation and overcurrent protection. Package Includes: 1x HUB Unit1x Grove Cable Specifications: Dimensions 32 x 24 x 12mm Weight 17gm

M5 Stack Solid State Relay Unit(BT136S) UNIT SSR Solid-state relays are different from traditional electromagnetic relays in that their switching life is much longer than that of electromagnetic relays. With integrated MOC3043M optocoupler isolation and zero-crossing detection, It supports input 3.3-5V DC control signal, and control output single-phase 220-250V AC power.UNIT SSR is controlled by power semiconductor devices, with microsecond on/off speed and built-in overcurrent protection. Extensively used in lighting control, CNC machine tools, etc., where frequent on/off lines and fast response are required. Note: 1. Please be careful when using high voltage AC loads, and do not operate with electricity.2. This relay is for AC loads only. Applications: Motor control Industrial and domestic lighting Heating and static switching Stage lighting Medical equipment, traffic signal lights Package Includes: 1x Unit SSR1x HY2.0-4P Cable Specifications: SCR Model BT136S Optocoupler Isolation Model MOC3043 Control Signal 3.3-5V DC On/Off Voltage 单相 AC: 220-250V Max. load current 2A Number of control channels 1 Overcurrent protection Fuse: 2A Operating Temperature -10 to +80°C Dimensions 54 x 54 x 16mm Weight 70gm

M5 Stack Catch Unit (SG92R) The catch is a gripper that uses an SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design compatible with Lego 8mm round holes. You can combine it with other Lego components to build creative control structures, such as robotic arms, gripper carts, etc. Note: Because the opening and closing angle of the gripper is 90°, please control the rotation angle of the driving servo to 0-45° (PWM: freq: 50Hz, 0°-45°(pulse:0.5ms-1ms) to prevent blocking rotation. The steering gear burned out. Applications: Robot gripper Steering gear manipulator gripper Package Includes: 1x Catch Unit(Built-in Servo-SG92R)1x HY2.0-4 adapter1x RoverC.Pro Connector Specifications: Servo model SG92R Drive signal PWM: freq: 50Hz, 0°-45°(pulse:0.5ms-1ms) Working frequency 50Hz Clamping jaw opening and closing angle 90° Input voltage range 4.2-6V Work dead zone 10us Output torque 2.5kg/cm at 4.8V Output speed 0.1sec/60° at 4.8V Working temperature 0°C to 55°C Dimensions 72 x 56 x 37 mm Weight 50gm

M5 Stack Grove-T Connector (5pcs) CONNEXT-T is a T-shaped hub. Is this remind you of the HUB unit? They are basically the same thing, just in different shapes. This is also used for CONNEXT port expansion.Note: CONNEXT-T is just a hardware expander, if you are looking for a hardware and software(standard protocol) expander like I2C, Single-bus, please check PaHUB or PbHUB. If you connected two I2C slave devices onto HUB that share the same address, you will have a problem getting I2C data from both. Also check the M5 Stack Mini 3A Relay Unit, It is described as an M5Unit implementing Relay functions, serving as an electrically operated switch. The Relay supports input voltage up to 30V DC and 220V AC. It has 3 pins named ON, OFF, and COM, allowing programming to connect COM to either ON or OFF using digital GPIO output. The applications include remote control of high-power appliances. Package Includes: 5 x Grove-T Connector

M5Stack Watering Unit with Moisture Sensor and Pump Watering is a capacitive soil moisture detection and adjustment unit. The product integrates water pump and measuring plates for soil moisture detection and pump water control. It can be used for intelligent plant breeding scenarios and can easily achieve humidity detection and Irrigation control. The measurement electrode plate uses the capacitive design, which can effectively avoid the corrosion problem of the electrode plate in actual use compared with the resistive electrode plate. Applications: Plant cultivation Soil moisture detection Smart irrigation Package Includes: 1x Watering Unit2x suction pipe1x HY2.0-4P cable Specifications: Pump power 5W Dimensions 192.5 x 24 x 33mm Weight 103gm