Arduino Nano Original This Arduino Nano is an Original Arduino Nano Board. It is a breadboard-friendly board based on the ATmega328P from Arduino officials made in Italy. It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. The original Arduino Nano is a surface mount breadboard embedded version with an integrated USB. It is the smallest, most complete, and breadboard-friendly. The Nano is automatically sensing and switches to the higher potential source of power, there is no need for the power select jumper. Pinout Of Arduino Nano The Arduino Nano got the breadboard-ability of the Boarduino and the Mini+USB with a smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). This new version 3.0 comes with ATMEGA328 which offers more programming and data memory space. It is two layers. That makes it easier to hack and more affordable. Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino Nano Original online from the comfort of your home. Applications: Automation. Robotics. Control Systems. Embedded Computer. Package Includes: 1 x Arduino Nano Original  Specifications of Arduino Nano Original Model Type Arduino Nano Original Colour Teal Microcontroller ATmega328 Operating Voltage 5 V Input Voltage(Recommended) 7-12V Power Consumption 19mA Analog I/O Pins 8 Digital I/O Pins 22 (6 of which are PWM) PWM Output Pins 6 Architecture AVR Clock Speed 16MHz Flash Memory 32 KB of which 2 KB used by the bootloader EEPROM 1KB SRAM 2KB Shipment Weight 0.019 kg Shipment Dimensions 9 × 6 × 3 cm

Arduino Leonardo with Headers The Original Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Leonardo differs from all preceding arduino boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary chip (such as an FTDI friend, FTDI cable or the USB/Serial converter on the UNO). On one hand this means that sketches on the Leo are a little bigger because it’s also handling USB interaction. On the other hand, it allows the Leonardo to appear to a connected computer as a mouse and/or keyboard, in addition to a virtual (CDC) serial / COM port. This board is only supported in the latest Arduino IDE 1.0.1 so you will also need to update the IDE. Pinout Of Arduino Leonardo Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy the Arduino Leonardo board online from the comfort of your home. Package Includes: 1 x Arduino Leonardo with Headers Arduino Leonardo Specifications Brand  Arduino Microcontroller ATmega32u4 Operating Voltage 5V Input Voltage (Recommended) 7-12V Digital I/O Pins 20 PWM Channels 7 Analog Input Channels 12 Flash Memory 32 KB (ATmega32u4) of which 4 KB used by the bootloader SRAM 2.5 KB (ATmega32u4) Clock Speed 16 MHz Dimensions  7 x 5.5 cms Weight  25 grams

Arduino Nano RP2040 Connect without Header The Arduino Nano RP2040 Connect has a similar compact factor as the Raspberry Pi Pico, but it includes additional features, most notably WiFi and Bluetooth, as well as a 9-axis IMU sensor and microphone. Meet the only connected RP2040 board. It fits the Arduino Nano form factor, making it a small board with BIG features. The brain of the board is the Raspberry Pi RP2040 silicon; a dual-core Arm Cortex M0+ running at 133MHz. It has 264KB of SRAM, and the 16MB of flash memory is off-chip to give you extra storage. But what’s really exciting is the onboard connectivity options. The hugely popular and highly adaptable u-Blox NINA-W102 radio module is on there to make this a true IoT champion. This also means you can harness the power of the cloud, with full Arduino Cloud compatibility. It’s got onboard, built-in sensors to turn your builds into powerhouse arduino projects, too. Microphone and motion-sensing add a depth of possibilities that’s almost impossible to find on a board of this size. The Arduino Nano RP2040 Connect is the premium choice for RP2040 devices and the perfect option for upgrading your projects and unlocking the potential of new ones. Pinout Of Arduino Nano RP2040 Connect Get ConnectedThe u-Blox NINA-W102 radio module makes this the only connected RP2040 option. It gives you full WiFi 802.11b/g/n connectivity, along with Bluetooth® and BLE v4.2 Sensor OverloadPacked onto this tiny board are a couple of very useful sensors. A built-in mic is there for sound activation, audio control, and even AI voice recognition. The six-axis smart IMU with AI capabilities tells the board which way it’s moving and adds fall sensing and double-tap activation. Hard Working HardwareIt might be a small board, but the Nano RP2040 Connect packs a hardware punch. It matches the established Arduino Nano form factor, making it the perfect upgrade for projects of all sizes. More MemoryWith 16MB flash memory that’s external to the microprocessor, there are bags of room for your code and storage needs. Power PinsThe programmable I/O pins have functions that bigger boards only dream of; 22 digital, 20 with PWM, and 8 analogs. Raspberry Pi Pico CompatibleSmart software options for a very smart device. It has full support for the entire RP2040 software ecosystem. Arduino LoverSupports the Arduino programming language, the IDE 2.0, and all those awesome libraries. Python PowerGet a Nano RP2040 Connect, and it comes with a FREE OpenMV license for machine vision projects. Arduino Cloud ReadyProgram and operate the Nano RP2040 Connect directly from your web browser. Fully compatible from day one. Upload your sketches over the air with instant remote control from the free Arduino IoT Remote smartphone app. Package Includes: 1 x Arduino Nano RP2040 Connect without Header Specifications: Board Nano RP2040 Connect Microcontroller Raspberry Pi RP2040  USB Connector Micro USB  Communication UART, SPI & I2C Input Voltage 5-21v Operating Voltage 3.3v Clock Speed 133MHz Dimensions(LxW) 45 x 18mm Weight 6gm

Arduino Nano Every without Headers The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm. The original arduino nano is the preferred arduino board for many projects requiring a small and easy-to-use microcontroller board. The small footprint and low price, make the Nano Every particularly suited for wearable inventions, low-cost robotics, electronic musical instruments, and general use to control smaller parts of a larger project. The Arduino Nano Every is an evolution of the traditional Arduino Nano board but features a lot more powerful processor, the ATMega4809. This will allow you to make larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger). Pin Diagram: Pin Diagram of Arduino Nano Every without Headers If you used Arduino Nano in your projects in the past, the Nano Every is a pin-equivalent substitute. Your code will still work, and you will NOT need to re-wire those motors you planned in your original design. The main differences are a better processor and a micro-USB connector. The board comes in two options: Arduino Nano Every with Headers or Arduino Nano Every without Headers, allowing you to embed the Nano Every inside any kind of invention, including wearables. The board comes with tessellated connectors and no components on the B-side. These features allow you to solder the board directly onto your own design, minimizing the height of your whole prototype. Application: Gamepad Robot arm Wave generator Telescope tracking Temperature sensor LCD custom shapes Package Includes: 1 x Arduino Nano Every without Headers Specifications: Brand  Arduino Model Arduino Nano Every Microcontroller ATMega4809 Operating Voltage 9V VIN min-MAX 7-21V DC Current per I/O Pin 20 mA Clock Speed 20MHz Analog Input Pins 8 (ADC 10 bit) Dimensions  4.5 x 1.8 cms  Weight  5 grams

Arduino UNO R3 Original The Arduino Uno R3 Original is the original, reliable, and trusted microcontroller board perfect for all your projects. It has a robust design with powerful features including an ATmega328 processor which allows it to perform efficiently in many operations from basic sensing to more complex tasks such as motor control. The onboard I/O ports allow real-time communication between devices while providing a range of easy programming options, making it ideal for DIY enthusiasts or engineering students wanting to explore hardware electronics.  With its user-friendly open-source platform, developing both low-level code and high-level applications becomes accessible – allowing you to turn ideas into reality quickly! Utilizing advanced yet affordable components like integrated USB offers quality assurance at every step of development whether simple modules are being tested or creating advanced robotics control systems that can tackle demanding challenges posed by fast-paced markets today.  Read our blog IR sensor Arduino code for Interfacing IR Sensor Module with Arduino where we explain Arduino Code and steps in uploading the code to the Arduino board. Key Features This board has six analog input/output pins, numbered from 0 to 5, It means you can connect more sensors and actuators to the Arduino UNO R3. You can program the microcontroller on the board directly using an external programmer cause this board supports In-System Programming (ISP) download, You can connect to a variety of external components such as sensors, LEDs, motors, and more with 14 digital input/output pins, numbered from 0 to 13. Can provide both 5V and 3.3V DC voltages, which makes it compatible with various components and accessories which require different voltage levels. You can power this using a USB cable when it's connected to a computer, also it can take power from an external source ranging from 5V to 9V DC. Why You Should Buy Arduino Uno Original? Choosing the real Arduino Uno R3 means you're getting the microcontroller board that's been checked a lot, so it's less likely to have problems. It also comes with official help, like a lot of useful guides and forums online, to help you start your projects and fix any issues you might have.  Arduino Uno Pinout The Arduino Uno R3 board can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or a battery. The adapter can be connected by plugging a 2.1mm centre-positive plug into the board's power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. The board can operate on an external supply from 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may become unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts. The power pins are as follows: Vin. The input voltage to the Arduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin. 5V.This pin outputs a regulated 5V from the regulator on the board. The board can be supplied with power either from the DC power jack (7 - 12V), the USB connector (5V), or the VIN pin of the board (7-12V). Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board. We don't advise it. 3V3. A 3.3-volt supply is generated by the onboard regulator. The maximum current draw is 50 mA. GND. Ground pins. IOREF. This pin on the Arduino board provides the voltage reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or enable voltage translators on the outputs to work with the 5V or 3.3V. Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino UNO R3 Original online from the comfort of your home. Explore a wide range of Original Arduino Boards on Iotcart. The Arduino Uno R3 is one of the best microcontrollers available today. Its unbeatable price makes it a go-to choice for both professionals and hobbyists alike. Iotcart's offering of an original, high-quality Arduino Uno at such low prices cannot be overlooked.  We are proud to provide this product with professional customer service and after-sales support that help you get your project up and running in no time! With its large community base ready to answer any queries you may have, reliable components, as well as easy programming options making use of popular development software like C++ & Python – this board will suit almost every purpose out there giving great results without breaking the bank! So why wait? Buy Arduino Uno R3 now before stock runs out! Arduino Uno R3 Microcontroller Board - Unboxing & Basic Testing w/IDE & mBlock Package Includes: 1 x Arduino UNO R3 Original Specifications: Arduino Model Arduino Uno R3 Original Microcontroller ATmega328 Operating Voltage 5V Supply Voltage (recommended) 7-12V Maximum supply voltage  20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40mA DC Current for 3.3V Pin 50mA Flash Memory 32 KB of which 0.5 KB is used by the bootloader SRAM 2KB EEPROM 1KB Clock Speed 16MHz

Arduino UNO R4 Minima Presenting the remarkable Arduino UNO R4 Minima, an extraordinary addition to the esteemed UNO board series. This pioneering release showcases an array of impressive attributes, commencing with its utilization of a 32-bit microcontroller. Empowered by the renowned RA4M1 series microcontroller from Renesas (R7FA4M1AB3CFM#AA0), housing a formidable 48 MHz Arm Cortex-M4 microprocessor.The UNO R4 Minima presents an expanded capacity for memory, including an impressive 256 kB flash, 32 kB SRAM, and 8 kB of data memory (EEPROM). Operating at 5 V, this board ensures seamless compatibility with UNO form factor accessories tailored for the same voltage. While earlier UNO shields remain functional, it is important to note that software compatibility may vary due to the microcontroller transition.Indulge in the unparalleled performance and enriched functionalities of the UNO R4 Minima, and embark on an extraordinary journey of innovation today. Also check Arduino UNO R4 WIFI. It is a 32-bit microcontroller board that represents a significant advancement from its 8-bit AVR predecessors. Key features include an integrated ESP32-S3 Wi-Fi module for seamless IoT connectivity, expanded memory with 256 kB flash and 32 kB SRAM, and a powerful 48 MHz Arm Cortex-M4 microprocessor

Arduino Nano 33 IOT Headers The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and create new ones) to be part of the IoT and design pico-network applications. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the Nano 33 IoT board is your one-stop solution for many of the basic IoT application scenarios. Pinout Of Arduino Nano 33 Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, Pune, or any other part of India you can order and buy Arduino boards online from the comfort of your home. Package Includes: 1 x Arduino Nano 33 IOT Headers Arduino Nano 33 IOT Headers Specifications Brand  Arduino  Board Arduino Nano  Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU Radio module u-blox NINA-W102  Operating Voltage 3.3V DC Current per I/O Pin 7 mA Clock Speed 48MHz SRAM 32KB Dimension  45 mm x 18 mm Weight 5 grams (with headers)

Arduino MKR IoT Carrier Rev2 ABX00073 Meet the Arduino MKR IoT Carrier Rev2, your go-to tool for creating exciting Internet of Things (IoT) projects easily. This carrier works with any board from the MKR family, so you don’t need extra parts to get started. Here’s what you can do with the MKR IoT Carrier Rev2: Build Environment Monitors: Use the built-in sensors to keep track of things like temperature, humidity, air pressure, and air quality. Monitor environmental changes and detect movement with ease. Using Grove connections, you can add more analog or I2C modules to your project. Data can be saved to an SD card or uploaded immediately to the Arduino IoT Cloud for real-time monitoring and analysis. Create Custom Interfaces: If you want to display sensor information or make your own controls, you can use the colorful OLED screen. This screen allows you to set up menus and options. Plus, you can use the LEDs and buzzer to give feedback and make your project more interactive. Control Devices: You can use the two built-in relays to manage electronic devices that use up to 24 volts. This means you can turn things like lamps on or off remotely using the Arduino IoT Cloud app. You can also use the data from the sensors to control these devices based on what’s happening in your environment. Differences between MKR IoT Carrier Rev2 and MKR IoT Carrier: Some changes have been made to the sensors and components in this updated version Some sensors have changed: The humidity sensor (HTS221) and the barometric pressure sensor (LP22HB) have been replaced with the new BME6688 sensor. The IMU (LSM6DS3) has been upgraded to the LSM6DSOX. Additionally, some components have been repositioned: A new reset button has been added. The relay connectors have been rotated 90°. The light sensor (APDS-9960) has been moved to a new position. The relay control pins have been changed to pins 1 and 2. The Grove connector assignment has shifted from pin A5 to pin A6. Check out: Arduino MKR IoT Carrier Rev2 Cheat Sheet Key

Arduino Nano Every with Headers The Arduino Nano Every is an evolution of the traditional Arduino Nano board but features ATMega4809 which is a more powerful processor. This will allow you to make larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger).  The Arduini Nano Every is a pin-equivalent substitute to the traditional Arduini Nano. The main differences of using arduino are a better processor and a micro-USB connector. The board comes in two options: Arduino Nano Every with Headers or Arduino Nano Every without Headers, allowing you to embed the Nano Every inside any kind of invention, including wearables. Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino boards from the comfort of your home.

Arduino Micro with Headers The Arduino Micro was developed by Arduino in collaboration with Adafruit. The Arduino micro is a powerful development board integrated with the ATmega32U4 microcontroller. This arduino board features 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. The Arduino Micro contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. This Original Arduino Micro is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behaviour of the board. Onboard is the processor, crystal, micro USB connection with fuse, Reset button, ISP low-level reprogramming header, ON LED, TX and RX LEDs, an extra user pin #13 LED, and a 3.3V regulator. You’ll probably also want to pick up a micro-B USB cable to connect this board to your computer You can use it for basic Arduino sketches as well as USB client projects like making it appear as a mouse or keyboard to your computer! Although it is not shield compatible – it does have all the same pins as a Leonardo. Its best for when you want to shrink your project down or use it on a breadboard. Pinout of Arduino Micro Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino Micro online from the comfort of your home. Package Includes: 1 x Arduino Micro Arduino Micro Specifications Brand  Arduino Microcontroller ATmega32U4 Operating Voltage 5V Input Voltage (recommended) 7-9V Digital I/O Pins 20 PWM Channels 7 Analog Input Channels 12 Flash Memory 32 KB (ATmega32U4) of which 4 KB used by the bootloader SRAM 2.5 KB (ATmega32U4) EEPROM 1 KB (ATmega32U4) Clock Speed 16 MHz Dimensions 4.8 x 1.8cms Weight  13 grams

Original Arduino Nano Every Meet the Original Arduino Nano Every: Flexibility and Power in a Small Package! The Original Arduino Nano Every is an amazing board for putting your creative ideas into action. It is an upgraded Arduino Nano with more features and a more powerful CPU packed in a small, simple design. Why You'll Love the Arduino Nano Every: Improved Processor: Because of the new ATMega4809, this board offers 200% more RAM and 50% more program memory than the Arduino Uno, which allows you to work on more complicated and advanced projects. Smooth Integration: If you've used the original Arduino Nano, the Nano Every is a great option. It is a pin-equivalent replacement, so your existing wiring and coding will keep working the way they are supposed to. Modern Connectivity: Programming and power access can be made easier via the micro-USB connector on the board. Customizable Design: Choose between options with or without headers based on your project's requirements. The board's tessellated connections and lack of components on the B-side make it easy to incorporate into creative designs, such as wearables. Compact Size: The Arduino Nano Every's 45x18mm dimensions make it perfect for applications with limited space. The Arduino Nano Every has the key to creating more complicated, innovative and successful projects. This board's performance and portability make it an essential tool for creators of all levels. Use this Arduino version to get started on your journey straight away!  Reach new levels with your inventions by buying the Original Arduino Nano Every. Come together to create! Key

Arduino Due Board Original Introducing the Arduino Due Original, the groundbreaking microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. This board is the first Arduino with a 32-bit ARM core microcontroller, unlocking a new level of performance and capabilities for your projects.Featuring 54 digital input/output pins, including 12 PWM outputs, and 12 analog inputs, the Arduino Due Original provides exceptional flexibility for connecting various sensors, actuators, and components. With its powerful 32-bit core, you can perform operations on 4 bytes of data within a single CPU clock, enabling rapid and efficient execution of complex tasks.The Arduino Due Original comes equipped with 96KBytes of SRAM and 512KBytes of flash memory, allowing you to store and run your code with ease. Additionally, it features a DMA (Direct Memory Access) controller that offloads memory-intensive tasks from the CPU, optimizing overall performance. Pinout Of Arduino Due Original The Arduino Due board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino Due online from the comfort of your home. Versatile Applications: Whether you're a hobbyist, a professional developer, or an educational institution, the Arduino Due Original caters to a wide range of applications. From building interactive art installations to crafting complex automation systems, this board is a versatile solution that adapts to your specific needs. Its broad compatibility with various shields and sensors makes it ideal for prototyping, testing, and bringing your ideas to life. Abundant Connectivity: The Arduino Due Original comes equipped with an impressive array of connectivity options. With its extensive I/O pins, including digital and analog inputs and outputs, you have the freedom to connect and interface with a multitude of external devices. The USB port enables easy communication with your computer, while the Ethernet connectivity allows for network integration. Additionally, the SD card slot provides expanded storage capabilities for data logging and file management. Reliable Development: As the original best Arduino board, the Arduino Due Original offers the utmost reliability and stability. It provides a consistent development environment that ensures seamless integration with the Arduino software ecosystem. The extensive community support, vast libraries, and countless online resources empower you to find solutions, troubleshoot issues, and share knowledge with fellow enthusiasts. With the Arduino Due Original, you can focus on what truly matters—your project. Competitive Pricing: We understand the importance of affordability without compromising on quality. That's why the Arduino Due Original offers exceptional value at a competitive price point. You get a feature-rich development board with unparalleled performance at a cost that won't break the bank. Whether you're a student, an entrepreneur, or a professional, this board is a wise investment for your creative endeavours. Join a Thriving Community: By choosing the Arduino Due Original, you become part of a vibrant community of creators, innovators, and learners. Share your projects, seek inspiration, and collaborate with like-minded individuals from around the world. The Arduino community is a treasure trove of knowledge and support, enabling you to grow and expand your skills as you embark on your development journey. Order Your Arduino Due Original Today: Don't miss out on the opportunity to take your projects to new heights. Embrace the power, versatility, and reliability of the Arduino Due Original. Place your order today and unlock a world of endless possibilities in electronics, programming, and beyond.Remember, the Arduino Due Original is just one of many remarkable development boards available. Explore our extensive collection of Arduino boards to find the perfect board that suits your specific needs. Together, let's shape the future of innovation! Also, read our blog on the best Arduino board explaining the different types of Arduino boards and how to select the right Arduino board for your needs. Package Includes: 1 x Arduino Due Original Board Features of Arduino Due Original Model Type Arduino Due Microcontroller Chip AT91SAM3X8E Input Voltage (limit) 6-16V Input Voltage(Recommended) 7-12V Analog I/O Pins 12 Digital I/O Pins 54 (of which 12 provide PWM output) Analog Output Pins 2 (DAC) Clock Speed 84 MHz Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) DC Current for 3.3V Pin 800 mA DC Current per I/O Pin 130 mA On-Board LEDs Yes Operating Temperature (°C) -20 to 80 Weight (gm) 36 Length (mm) 102 Width (mm) 54 Height (mm) 25 Shipment Weight 0.12 kg Shipment Dimensions 12 × 6 × 3 cm

Arduino MKR WIFI 1010 The Original Arduino MKR WiFi 1010 board is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop solution for many of the basic IoT application scenarios. The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It’s equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi-based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption. read more : COVID Hacks #4 Quarantine Enforcer Key

Original Arduino Nano 33 IOT ABX00027 With your own unique concepts, are you ready to bring your ideas to life? The only Arduino Nano 33 IoT that has to be found makes it possible! For any future IoT project, this strong and adaptable board is the perfect buddy. Why You'll Love the Arduino Nano 33 IoT: Seamless Connectivity: With inbuilt WiFi and Bluetooth features that enable real-time data transfer and control, you can quickly connect your projects to the outside world. Strong Performance: The low-power Arm® Cortex®-M0 32-bit SAMD21 CPU offers remarkable performance for a range of applications, from smart home automation to the latest wearables. Data Security: With the Microchip® ECC608 crypto chip, you can be sure that your projects are safe and secure and that your data is protected from unauthorized access. Built-in Sensors: The Arduino Nano 33 IoT's included a 6-axis IMU that makes it perfect for a variety of uses, including motion detection, pedometers, and robotics. Compact and Well Priced: You may explore and create without going over budget with this little board, which fits easily into any project. Why Wait? Start Building Your Dream Projects Today! The Original Arduino Nano 33 IoT is your ticket to exploring the world of IoT and beyond. With this board, you can create a personalized Bluetooth gadget, construct a smart home system, or start a new and unique project. Join the IoT transformation right now! By ordering from Iotcart, you can start using the Arduino Nano 33 IoT and discover unlimited possibilities. You can achieve your dreams and explore your creativity with the Arduino Nano 33 IoT. Let's create something great and show the world who we are! Key

Original Arduino UNO R4 WIFI Introducing the latest addition to the Arduino lineup, the Arduino UNO R4 WiFi board, which represents a significant leap forward in functionality and capabilities. Building upon the rich heritage of the UNO series, this advanced version incorporates cutting-edge features to empower your projects with remarkable efficiency. The key highlight of the UNO R4 WiFi lies in the seamless integration of the ESP32-S3 Wi-Fi module (ESP32-S3-MINI-1-N8), bestowing the UNO with built-in Bluetooth and Wi-Fi functionalities. This integration ensures a comprehensive connectivity solution for enhanced versatility and convenience.As a member of the first UNO series of 32-bit development boards, the UNO R4 WiFi marks a departure from its predecessors, which relied on 8-bit AVR microcontrollers. Leveraging a robust 48 MHz Arm Cortex-M4 microprocessor, this board leverages the prowess of the Renesas RA4M1 series microcontroller (R7FA4M1AB3CFM#AA0). Its expanded memory capabilities are truly impressive, featuring 256 kB flash, 32 kB SRAM, and 8 kB of EEPROM. To facilitate seamless and efficient communication between the RA4M1 and ESP32-S3 modules, a reliable logic level translator (TXB0108DQSR) is employed, ensuring optimal performance at all times. Upgrade to the Arduino UNO R4 WiFi today and unlock an unparalleled level of innovation within the realm of Arduino, ushering in a new era of limitless possibilities for your projects. Also, read our blog on the Best Arduino Board explaining the different types of Arduino boards and how to select the right Arduino board for your needs. Features The UNO R4 is now a 32-bit microcontroller board, previously based on 8-bit AVR. The board features 14 digital I/O ports and 6 analog channels. Dedicated pins for I2C, SPI, and UART connections. Significantly larger memory: 8 times more flash memory (256 kB) and 16 times more SRAM (32 kB). Fastest 48 MHz clock speed, 3x faster than its predecessors. Onboard ESP32-S3 module for Wi-Fi and Bluetooth connectivity. Onboard 12x8 LED matrix, making it one of the most visually unique best Arduino boards to date. The LED matrix is fully programmable, allowing you to load anything from still frames to custom animations. Also check the Arduino UNO R4 Minima. It is a development board featuring a 32-bit microcontroller with a 48 MHz Arm Cortex-M4 processor, providing enhanced performance compared to its predecessors. The board offers expanded memory with 256 kB flash memory, 32 kB SRAM, and 8 kB data memory (EEPROM). It comes with additional peripherals, including a Capacitive Touch Sensing Unit (CTSU), USB 2.0 Full-Speed Module (USBFS), and more. Pin Diagram: NEW Arduino UNO R4 WiFi | FULL Walkthrough! Package Includes: 1 x Arduino UNO R4 WIFI Specifications: Overview 48 MHz Arm Cortex-M4 microprocessor with a floating point unit (FPU)5 V operating voltageReal-time Clock (RTC)Memory Protection Unit (MPU)Digital-to-analog Converter (DAC) Memory 256 kB Flash Memory32 kB SRAM8 kB Data Memory (EEPROM) Peripherals Capacitive Touch Sensing Unit (CTSU)USB 2.0 Full-Speed Module (USBFS)14-bit ADCUp to 12-bit DACOperational Amplifier (OPAMP) Power Operating voltage for RA4M1 is 5 VRecommended input voltage (VIN) is 6-24 VBarrel jack connected to VIN pin (6-24 V)Power via USB-C at 5 V Communication 1x UART (pin D0, D1)1x SPI (pin D10-D13, ICSP header)1x I2C (pin A4, A5, SDA, SCL)1x CAN (pin D4, D5, external transceiver is required) Wi-Fi Wi-Fi support with 802.11 b/g/n standard (Wi-Fi® 4)Bit rate at up to 150 Mbps2.4 GHz band Bluetooth Bluetooth 5 Shipment Weight 0.03 kg Shipment Dimensions 10 × 8 × 4 cm