Official Arduino Portenta CAT.M1/NB IoT GNSS Shield - ASX00027

RadioLink SE100 M10 GPS Module with High Positional Accuracy for Drones & UAVs The SE100 M10 GPS Module with High Positional Accuracy is a precision navigation sensor designed to provide reliable and accurate positioning data for drones, UAVs, robotics, and other GPS-enabled applications. Featuring advanced satellite signal processing and a compact form factor, this module ensures strong signal reception, fast satellite lock times, and stable performance even in challenging environments. Ideal for both hobbyists and professional developers, the SE100 M10 offers seamless integration with flight controllers and navigation systems, helping improve flight stability, waypoint tracking, and autonomous operation. Whether you’re building a custom drone, upgrading navigation accuracy, or enhancing your robotics project, this GPS module delivers dependable performance for enhanced control and situational awareness. Features: High positional accuracy GPS module for drones, UAVs, and robotics applications Powered by advanced M10 GNSS technology for improved satellite tracking Fast satellite acquisition with stable and reliable signal reception Compact and lightweight design for easy integration with flight controllers Supports precise navigation, waypoint tracking, and autonomous flight modes Suitable for hobby, research, and professional UAV projects

Radiolink SE100 GPS Module with GPX Holder The Radiolink SE100 GPS Module with GPX Holder is designed to provide accurate positioning and stable navigation for RC drones and UAV platforms. With fast satellite acquisition and strong signal stability, it ensures reliable real-time location tracking for smooth and controlled flights. Featuring an integrated digital compass, the SE100 enhances directional accuracy for improved waypoint navigation, return-to-home functionality, and autonomous flight operations. The included GPX holder offers secure installation and helps reduce vibration interference, supporting consistent GPS performance. Compatible with Pixhawk flight controllers and Radiolink systems, the SE100 GPS module is an ideal solution for quadcopters, fixed-wing aircraft, and multi-rotor drones requiring dependable navigation support. Features: Delivers high positioning accuracy of approximately 50 cm and can detect up to 20 satellites within seconds in open areas. Equipped with a 2.5 dBi ceramic antenna that improves weak signal reception and minimizes interference through effective filtering. Powered by the u-blox UBX-M8030 (M8) 72-channel chipset with Infineon MMIC BGA715L7, offering superior performance compared to standard single GNSS 7N modules. Features a built-in high-precision QMC5883L electronic compass (I2C interface) based on technology similar to Honeywell HMC5983, supporting GPS, GLONASS L1OF, QZSS L1 C/A, and BeiDou B1 dual-mode positioning. Compatible with Radiolink Pixhawk flight controllers; compact size of 1.89 × 1.6 × 0.59 inches, ideal for DIY drones, quadcopters, multicopters, and RC vehicles.

Radiolink TS100 V2.0 Mini GPS Module The Radiolink TS100 V2.0 Mini GPS Module is a compact and high-precision positioning solution designed for RC drones, UAVs, and autonomous flight systems. Built for reliable performance, this mini GPS module provides accurate real-time location tracking, ensuring improved navigation and enhanced flight safety. Integrated with a built-in digital compass, the TS100 V2.0 Mini GPS delivers precise directional data, enabling stable flight control, return-to-home functionality, waypoint navigation, and autopilot operations. Its optimized antenna design ensures faster satellite acquisition and strong signal stability, even in environments with potential interference. Designed for seamless compatibility with Pixhawk flight controllers and Radiolink transmitters, this lightweight GPS module is easy to install on quadcopters, fixed-wing aircraft, and multi-rotor platforms. The Radiolink TS100 V2.0 Mini GPS Module is an excellent choice for drone enthusiasts and professionals seeking dependable navigation performance in a compact form factor. Radiolink MINI M8N GPS TS100 Configuration: Equipped with u-blox UBX-M8030 (M8) GPS decoder chip with 72-channel reception capability. Integrated Infineon MMIC BGA715L7 power amplifier for enhanced signal performance. Delivers better accuracy and stability compared to standard single GNSS 7N modules. Supports simultaneous dual GNSS operation for improved positioning reliability. Compatible with GPS/QZSS L1 C/A, GLONASS L1OF, and BeiDou B1 signals. Supports SBAS L1 C/A systems including WAAS, EGNOS, and MSAS. Built-in QMC5883L geomagnetic sensor based on similar technology to Honeywell HMC5983. Features 2.5 dBi high-gain ceramic antenna for strong signal reception. Includes Murata Surface Acoustic Wave Filter (SAWF) for improved signal filtering. Designed for stable performance with strong anti-interference capability. Features: Supermini Size – Compact and lightweight design ideal for small drone and UAV builds. Excellent Performance – Provides fast satellite lock with stable and accurate positioning. Worry-free Practice – Ensures reliable GPS tracking for safe and confident flight operations.

Holybro Micro M9N GPS With Case The Holybro Micro M9N GPS With Case is a compact, high-performance M9N GPS with case module designed to deliver precise positioning and reliable navigation for advanced drone and UAV applications. Featuring multi-constellation GNSS support, this GPS unit tracks multiple satellite systems simultaneously to ensure fast satellite acquisition, improved accuracy, and strong signal reliability. The included protective case not only enhances durability but also simplifies mounting and installation on a variety of drone frames and robotic platforms. Equipped with an IST8310 compass and a high-performance antenna, this GPS module provides accurate heading information and robust signal reception, enhancing overall flight stability and control. Whether you’re conducting waypoint missions, autonomous navigation, or complex aerial maneuvers, the Holybro Micro M9N GPS With Case delivers dependable performance in both indoor and outdoor environments. Its lightweight design and advanced features make it an excellent choice for hobbyist builders and professional UAV developers alike. Features: Compact M9N GPS with case designed for accurate and reliable drone navigation. Supports multi-constellation GNSS for faster satellite lock and improved positioning accuracy. Integrated IST8310 compass provides precise heading and orientation data. High-performance antenna ensures strong signal reception and stable navigation. Protective case improves durability and simplifies installation on drone frames. Ideal for multirotor drones, UAV platforms, and autonomous navigation applications.

Holybro M10 GPS Standard GPS (GHR 1.25mm 10 pin) The Holybro M10 GPS Standard GPS (GHR 1.25 mm 10-pin) is a high-precision M10 GPS module engineered for reliable positioning and navigation in advanced drone applications. Featuring the powerful u-blox M10 series chipset, this GPS unit delivers fast satellite acquisition, improved signal sensitivity, and accurate location data to enhance flight stability and autonomous performance. Its standard connector and 10-pin interface make it easy to integrate with a wide range of flight controllers and UAV systems, ensuring seamless setup for custom builds and professional projects. Designed for both hobbyists and serious drone developers, the Holybro M10 GPS provides robust navigation feedback that helps maintain steady flight paths, enable precise waypoint missions, and improve return-to-home accuracy. The compact and lightweight module is perfect for multirotor drones, fixed-wing aircraft, and research UAVs that demand dependable positioning even in challenging environments. With its advanced u-blox technology and M10 series performance, this GPS unit enhances overall drone control and situational awareness for every flight. Features: High-precision M10 GPS module powered by advanced u-blox M10 series technology for accurate positioning. Fast satellite acquisition and strong signal sensitivity for reliable navigation performance. Standard GHR 1.25 mm 10-pin connector for easy and secure integration with flight controllers. Provides stable location data to support autonomous flight and return-to-home functions. Compact and lightweight design suitable for multirotor, fixed-wing, and UAV platforms. Ideal for professional drone applications, research projects, and advanced UAV builds.

7Semi EC20 CAT-4 LTE 4G GNSS Nano Modem The 7Semi EC20 CAT-4 LTE 4G GNSS Ultra-compact Nano Modem is a powerful and space-saving solution designed to bring fast, reliable cellular connectivity to IoT and M2M applications. Built around Quectel’s EC20 R2.1 module, it supports LTE, UMTS/HSPA+, and GSM networks, enabling seamless communication across diverse environments. With download speeds up to 150 Mbps and upload speeds up to 50 Mbps, the modem delivers the performance needed for data-intensive applications like tracking, telemetry, remote monitoring, and industrial IoT. Beyond connectivity, the module features advanced multi-GNSS positioning including GPS, GLONASS, BeiDou, Galileo, and QZSS. It comes with a micro-USB interface for direct PC/laptop connectivity, optional UART support, nano SIM slot, and flexible powering through USB or 5–14V external input. With its wide operating temperature range and compact form factor, this modem is ideal for Raspberry Pi integrations, embedded projects, and outdoor systems requiring stable cellular + GNSS capabilities. Features: Offers multi-network connectivity with LTE, UMTS/HSPA+, and GSM/GPRS/EDGE support for global coverage. Provides high-speed data performance with up to 150 Mbps downlink and 50 Mbps uplink for demanding IoT applications. Supports advanced GNSS systems including GPS, GLONASS, BeiDou, Galileo, and QZSS for accurate geolocation. Includes micro-USB interface for direct PC/laptop connection and optional UART for embedded hardware integration. Compatible with nano SIM cards and can operate on 5V USB or 5–14V external power for wide deployment flexibility. Designed for rugged use with a wide operating temperature range of -40°C to 80°C. Ideal for PC, laptop, and Raspberry Pi usage, including remote monitoring, navigation, and IoT deployments. Includes high-gain internal antenna (8dBi) with IPEX connector for strong and stable signal reception. 7Semi EC20 CAT-4 LTE 4G GNSS Nano Modem Dimensions

Holybro M9N GPS with Standard Connector The Holybro M9N GPS with Standard Connector is a high-precision M9N GPS module designed for reliable positioning and navigation in drone applications. Utilizing the advanced u-blox M9N chipset, this GPS unit delivers fast satellite acquisition, improved sensitivity, and enhanced signal quality, making it ideal for demanding UAV projects. With its standard connector, it integrates seamlessly with popular flight controllers and power systems, ensuring consistent location tracking for autonomous missions, waypoint navigation, and stable hover performance. Built for both hobbyists and professional drone builders, this GPS module improves flight reliability by providing accurate latitude, longitude, altitude, and velocity data to your flight system. The standard connector simplifies installation and reduces wiring complexity, allowing for a clean and dependable setup. Whether you are developing high-performance multirotor drones, fixed-wing aircraft, or research UAVs, the Holybro M9N GPS enhances overall flight control and situational awareness. Features: High-precision M9N GPS module designed for accurate positioning and reliable navigation in drone applications. Uses an advanced GPS chipset for fast satellite acquisition and improved signal sensitivity. Standard connector ensures easy compatibility with popular flight controllers and UAV systems. Provides stable location, altitude, and velocity data for smooth and controlled flight performance. Compact and lightweight design suitable for multirotor, fixed-wing, and VTOL drones. Ideal for professional UAV projects, autonomous missions, and advanced hobbyist builds.

Cytron PS2 Shield for Arduino The Cytron PS2 Shield is a compact and reliable PS2 controller interface designed for Arduino boards, making remote control projects smoother and far more intuitive. Whether you're working with an Arduino Uno, Mega, Leonardo, or other compatible boards, this shield lets you easily integrate a wired or wireless PS2 controller into your robotics, DIY RC projects, or gaming-inspired builds. With simple UART communication and a plug-and-play connector, reading joystick inputs and button states becomes effortless, even for beginners. Built with developers and hobbyists in mind, the Cytron PS2 Shield provides flexible UART selection options, stackable headers for adding more shields, and support for vibration motors on PS2 controllers. Because it draws power directly from the Arduino board, setup stays clutter-free. This PS2 Shield is perfect for anyone looking to add remote control, robotics maneuvering, or wireless navigation to their Arduino-based projects using a familiar PS2 controller format. Features: Provides an easy and reliable interface for connecting wired or wireless PS2 controllers to Arduino boards. Supports multiple Arduino models including UNO, Mega, Leonardo, and other pin-compatible variants. Simple UART-based communication allows effortless reading of joystick and button states. Integrated support for controlling the PS2 controller’s vibration motor for enhanced feedback. Stackable headers enable additional shields to be mounted above the PS2 Shield without conflict. Jumper-based selection for baud rates (9600, 57600, 115200) and configurable UART TX/RX pins. Fully powered from the Arduino main board with low current consumption. Includes status LED and reset control via Arduino A1 pin for convenient operation.

HGLRC M100 PRO GPS The HGLRC M100 PRO GPS is a compact and high-precision GPS module designed for drone applications. It utilizes a u-blox M10 chip, offering fast and accurate positioning with support for multiple satellite constellations, including GPS, GLONASS, Galileo, and BeiDou. This multi-constellation capability enhances signal reliability and accuracy, even in challenging environments. The module is known for its low power consumption and small form factor, making it ideal for space-constrained builds. Additionally, it often features a built-in compass for heading information and a high update rate, contributing to stable and reliable flight performance. Features Powered by the latest 10th generation chip, enabling faster processing and improved performance with the ability to search and connect to 50+ satellites for enhanced accuracy. Integrated QMC5883L compass ensures precise orientation and stable directional tracking, improving navigation reliability. Upgraded to support 120 receiving channels, allowing the module to lock onto more satellites simultaneously for quicker positioning and stronger signal acquisition. Advanced five-mode positioning system provides highly stable and reliable connectivity, ensuring consistent performance even in challenging environments. Enhanced signal stability and anti-interference capability help maintain accurate location tracking, offering better protection and control during operation. Optimized for faster satellite lock time, reducing delays and improving overall efficiency in real-time applications.

SmartElex u-blox MAX-M10S GNSS Module Breakout The SmartElex u-blox MAX-M10S GNSS Module Breakout is a compact, ultra-low power GNSS module designed for precision positioning in battery-operated applications such as asset trackers, wearables, and IoT devices. Powered by the u-blox MAX-M10S GNSS receiver, it supports multi-constellation tracking including GPS, GLONASS, BeiDou, and Galileo while consuming less than 25 mW in continuous tracking mode. u-blox Super-S technology enhances RF sensitivity, enabling accurate location fixes even with small antennas and in non-line-of-sight conditions. An on-board rechargeable backup battery maintains the RTC and GNSS orbit data for up to 5 hours, reducing time-to-first-fix from a ~24 s cold start to a ~1 s hot start. The board includes an SMA connector for external antennas, 0.1″ spaced pins for breadboard use, and a UART interface compatible with standard serial adapters. Configuration options such as baud rate, update rate, spoofing detection, and interrupts can be easily managed using the u-blox u-center software, making this low power GNSS module a reliable choice for high-accuracy positioning applications. Note: The MAX-M10S's I2C address is 0x42, which is software programmable. A multiplexer/Mux is required to communicate with many MAX-M10S boards with the same address on a single bus. Features: 1.5m Horizontal Accuracy 10Hz Max Update Rate Hot: 1sMax Altitude: 80,000m Max G: ≤4 Max Velocity: 500m/s Velocity Accuracy: 0.05m/s Heading Accuracy: 0.3 degrees Time Pulse Accuracy: 30ns 3.3V VCC and I/O Current Consumption: ~6mA to ~25mA (varies with constellations and tracking state) Supports NMEA and UBX protocols over I2C or UART interfaces

HGLRC M80 PRO GPS Module for FPV Racing Drones The HGLRC M80 PRO is a reliable and efficient FPV drone GPS module built to deliver accurate positioning and enhanced flight control for FPV racing drones. Equipped with a QMC5883 compass chip, it ensures precise directional data and quick location identification during flight. The module features a high-sensitivity antenna that provides stronger signal reception, allowing faster satellite acquisition and stable connectivity even in challenging environments. With its convenient plug-and-play design, the HGLRC M80 PRO eliminates the need for soldering, making installation simple and hassle-free. This GPS module is an essential upgrade for pilots looking to improve navigation accuracy, enable return-to-home functionality, and enhance overall drone safety and performance. Features: GPS with high precision ensures accurate positioning. Fast satellite acquisition for a rapid start. For maximum dependability, GPS and GLONASS are supported. Compact and light-weight design. A compass is built-in to help with orientation.

Holybro Pixhawk 6C Flight Controller With PM02 Power Module and M9N GPS The Holybro Pixhawk 6C Flight Controller with PM02 Power Module and M9N GPS is an advanced pixhawk flight controller built to deliver reliable, precise control for a wide range of UAV platforms. Equipped with a high-performance processor and advanced sensors, this controller ensures stable flight dynamics, quick response times, and superior handling for multirotor, fixed-wing, and VTOL drones. Designed with both hobbyists and professional developers in mind, it supports popular open-source firmware and provides the flexibility needed for autonomous missions, research applications, and custom drone builds. This complete package includes a robust drone flight controller, the PM02 power module for clean and regulated energy supply with real-time current and voltage monitoring, and the high-precision GPS module with integrated compass for accurate positioning and navigation. Together, these components simplify setup, enhance flight reliability, and improve overall performance, making it an ideal choice for builders seeking a comprehensive flight system with dependable power management and precision location tracking. Features: High-performance pixhawk flight controller designed for fast processing and stable, accurate drone control. Includes PM02 power module for clean and regulated power delivery with real-time voltage and current monitoring. Comes with M9N GPS module and integrated compass for precise positioning and reliable navigation. Supports multirotor, fixed-wing, and VTOL drone platforms for versatile UAV applications. Compatible with popular open-source flight controller firmware for flexible customization. Simplified wiring and robust power management improve safety and overall system reliability.

7Semi EC200U 4G LTE Cat 1 Dongle with GNSS Positioning The 7Semi EC200U 4G LTE Cat 1 Dongle is designed to deliver stable, high-speed connectivity for industrial systems, IoT deployments, and edge computing devices. Powered by the reliable Quectel EC200U-CN module, it supports LTE Cat 1, GSM, and GPRS networks, making it a dependable choice for projects that require continuous wireless communication. Its plug-and-play USB design ensures quick setup on Windows, Linux, and embedded platforms like Raspberry Pi or industrial PCs. Along with strong cellular performance, the dongle features integrated GNSS positioning, supporting GPS, GLONASS, BeiDou, Galileo, and QZSS for accurate tracking. Whether used for remote monitoring, automation, telemetry, or cloud-connected devices, this LTE Cat 1 dongle offers seamless integration, reliable communication protocols, and long-term durability making it ideal for modern IoT and industrial connectivity needs. Features: Supports LTE Cat 1, GSM, and GPRS networks for dependable wireless connectivity. Delivers stable data speeds up to 10Mbps downlink and 5Mbps uplink for real-time communication. Integrated GNSS engine supports GPS, GLONASS, BeiDou, Galileo, and QZSS for accurate positioning. Plug-and-play USB interface with wide compatibility for Windows, Linux, Raspberry Pi, and industrial hosts. Supports multiple communication protocols including TCP, UDP, HTTP, MQTT, HTTPS, NTP, FTP, SSL, and more. Features a nano SIM card slot (1.8V/3V) for flexible network access. Reliable build quality designed for continuous industrial operation. Flexible antenna design for enhanced signal performance in challenging environments.

Cytron ESP8266 WiFi Shield for Arduino with WROOM-02 Module The Cytron ESP8266 WiFi Shield is a beginner-friendly, plug-and-play solution that makes adding WiFi connectivity to Arduino projects incredibly easy. Powered by the reliable ESP8266 WROOM-02 module, this shield eliminates the wiring complications and level-shifting issues commonly faced when using standalone ESP modules. With preloaded Cytron_ESP_AT Firmware V2.2.0, onboard 3.3V regulation, selectable UART pins, and support for AT-command control, it is the perfect choice for IoT applications, wireless sensor systems, home automation, and connected electronics. Designed with the Arduino R3 layout, this WiFi shield works seamlessly with Arduino UNO, Maker UNO, CT-UNO, CT-ARM, and various compatible boards. It also offers direct programming access to the ESP8266, breakout I/O pins, and optional microSD card support for data logging. Whether you're uploading custom firmware or using AT commands for WiFi communication, the Cytron ESP8266 WiFi Shield delivers stable wireless performance, strong signal output, and unmatched ease of integration, making it ideal for both beginners and advanced IoT developers. Features: Compatible with Arduino R3 layout boards including Maker UNO, CT-UNO, CT-ARM, Arduino UNO R3, and Arduino Leonardo. Preassembled with ESP8266 WROOM-02 module and flashed with Cytron_ESP_AT V2.2.0 firmware. Onboard 3.3V regulator capable of supplying up to 500mA for stable WiFi operation. Selectable UART/Serial communication via mini jumpers (USB, hardware serial, software serial options). Supports 802.11 b/g/n, Wi-Fi Direct (P2P), Soft-AP mode, and full TCP/IP protocol stack. Integrated TR switch, balun, power amplifier, LNA, PLLs, regulators, and 32-bit CPU. +19.5 dBm output power for strong wireless range. Breakout pins available for programming or full I/O access of WROOM-02. Includes optional microSD slot for data logging and local storage. Each shield is fully assembled and tested before shipping.

Arduino Explore IOT Kit Rev2 AKX00044 The Arduino Explore IoT Kit Rev2 is a great tool for high school and college students who want to learn about creating connected devices, or IoT. It helps them quickly get started with easy activities and work on 10 hands-on projects focused on important issues like sustainability. These projects let students solve real-world problems related to the UN’s Sustainable Development Goals, such as improving urban farming, health monitoring, and managing water and waste. They’ll use design thinking to come up with their own solutions. This kit not only teaches technology but also helps students understand and address important challenges, preparing them to make a positive impact on the world. Learning Outcomes: Gain a solid understanding of how Internet-connected devices work and communicate. Explore and solve global sustainability challenges related to the UN’s Sustainable Development Goals. Learn to manage and analyze data using real-world sensors. Develop skills in computational thinking through data handling and device control. Use the Cloud to remotely control actuators like LEDs, buzzers, and displays based on sensor data.