SmartElex 12V 3A Single Channel Signal Relay Module

SmartElex TPS61040 12V Boost Converter Module SmartElex TPS61040 12V Boost Converter Module is designed to step up lower DC voltages to a stable 12V output, making it an ideal solution when your circuit requires a higher operating voltage than the available power source. This 12V boost converter is especially useful for students, hobbyists, engineers, educators, and startups working with battery-powered electronics or low-voltage microcontroller projects. It solves the challenge of powering 12V devices from compact power supplies like 3V or 5V inputs, without needing bulky transformer-based solutions. As a 3V to 12V boost converter, it integrates easily with platforms like Arduino, Raspberry Pi, ESP32, and other development boards, making it highly suitable for robotics, IoT nodes, portable gadgets, automation circuits, and prototyping environments. Its compact design and reliable output make it a practical choice for powering sensors, actuators, communication modules, and small peripherals that need a 12V line. This module helps builders maintain efficiency and portability in their designs while ensuring stable performance across a range of real-world applications. Features: Steps up lower DC input to a stable 12V output Based on the TPS61040 high-efficiency boost converter IC Enables 12V operation from 3V, 5V, or other low-voltage sources Ideal for battery-powered and portable electronics Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Suitable for sensors, small modules, IoT devices, and automation projects

SmartElex CP2102 Type C, USB To UART (TTL) Communication Module The SmartElex CP2102 module is a compact and reliable communication module designed to convert USB-C signals into UART (TTL) serial communication. It helps users easily connect microcontrollers and development boards to a computer for programming, debugging, and serial monitoring, removing the need for complex interfaces. This module is well suited for students, makers, educators, engineers, and startups who need a dependable USB to serial solution for everyday electronics work. This USB to UART TTL converter module works smoothly with popular platforms such as Arduino, Raspberry Pi, and ESP32, making it useful for robotics, IoT development, automation systems, and rapid prototyping. Its plug-and-play USB-C design allows quick setup and stable data communication, saving time during development and testing. Whether used for firmware upload, device configuration, or serial communication, this module offers reliable performance and easy integration for practical embedded projects. Applications: Programming and debugging microcontrollers Serial communication with embedded systems USB to TTL conversion for compatible devices Data logging, testing, and monitoring tasks Cautions: Ensure the correct voltage is selected using the onboard jumper to avoid damage Designed only for TTL-level signals; do not connect directly to RS232 interfaces Avoid exposure to moisture and protect the module from static discharge Features: USB-C to UART (TTL) communication module for serial interfacing Based on CP2102 chipset for stable and reliable data transfer Plug-and-play design for quick setup with a computer Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Ideal for programming, debugging, and serial monitoring tasks Suitable for robotics, IoT, automation, and DIY electronics projects

SCD40 I2C CO Temperature & Humidity Sensor Breakout Module - 7Semi The 7Semi SCD40 is a compact sensor breakout based on Sensirion’s advanced photoacoustic NDIR technology. It accurately measures CO concentration from 400 ppm to 40,000 ppm, along with ambient temperature and humidity. Ideal for air quality monitoring, HVAC systems, and IoT applications. It communicates over the I²C interface and is compatible with most microcontrollers. With low power consumption, long-term stability, and minimal recalibration requirements, the SCD40 is well-suited for portable and embedded systems requiring reliable environmental data. Features Photoacoustic CO Sensing: Uses advanced photoacoustic infrared technology for high-precision CO measurement. 3-in-1 Environmental Monitoring: Simultaneously tracks CO levels, temperature, and humidity for a complete atmospheric overview. Wide CO Detection Range: Measures concentrations from 400 ppm to 40,000 ppm, with optimal accuracy in the 400–2000 ppm range. High Accuracy: Offers a precision of ±(40 ppm + 5%), making it ideal for critical monitoring applications. Low Power Consumption: Consumes only 17 mA at 5s intervals and 0.5 mA at 5-minute intervals, perfect for battery-powered projects. Plug-and-Play Ready: Factory-calibrated and ready for immediate use—no manual calibration required. I2C Interface: Compatible with Arduino, Raspberry Pi, ESP32, STM32, and other popular microcontrollers via I2C. Compact Design: Small, robust module fits easily into embedded systems and space-limited enclosures. SCD40 carbon dioxide sensor Breakout I2C Arduino Connections

SmartElex ILD213T Opto-isolator Breakout Board SmartElex ILD213T Opto-isolator Breakout Board is designed to provide reliable electrical isolation between two circuits, helping protect sensitive components from voltage spikes, noise, and ground loop issues. This opto isolator board uses the ILD213T optocoupler to safely transfer signals while keeping high-voltage and low-voltage sections separated. It is a practical solution for students, hobbyists, engineers, educators, and startups who need to interface microcontrollers with external hardware without risking damage to their development boards or sensors. This ILD213T optoisolator module is well-suited for robotics, IoT systems, industrial automation, and embedded prototyping where signal integrity and safety are important. It integrates easily with platforms like Arduino, Raspberry Pi, and ESP32, enabling secure communication with relays, motors, sensors, and noisy electrical equipment. By using this electrical isolation board, users can build more stable and durable projects, ensuring consistent performance and reduced troubleshooting due to interference or short circuits. Features: Provides electrical isolation between input and output circuits Based on the ILD213T optocoupler for reliable signal transfer Protects microcontrollers from voltage spikes and noise Helps prevent ground loops and interference issues Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Ideal for robotics, IoT, automation, and industrial interfaces

SmartElex Dual Channel Battle Relay module The SmartElex Dual Channel Battle Relay Module is a compact and practical relay board designed to safely control high-power electrical loads using low-voltage control signals. It helps users switch devices like motors, lights, pumps, or appliances without directly handling high voltage, making projects safer and more reliable. This module is well suited for students, makers, educators, and engineers who are working on control systems, robotics projects, or learning automation concepts in labs and classrooms. This dual-channel relay module is commonly used in robotics, home automation, IoT experiments, and industrial prototyping where isolated and dependable switching is required. It integrates easily with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick connection and straightforward control through digital pins. With stable operation and simple interfacing, the SmartElex Dual Channel Battle Relay Module enables developers to focus on logic and application design, making it ideal for DIY projects, academic experiments, and early-stage product development. Connection Diagram : Features: Dual-channel relay module for independent control of two loads Safely switches high-power devices using low-voltage control signals Electrical isolation for improved safety and reliable operation Easy interfacing with Arduino, Raspberry Pi, and ESP32 boards Suitable for robotics, RC systems, automation, and DIY projects Compact design ideal for prototyping and embedded applications Applications: Control of auxiliary systems in RC combat and battle vehicles Glow plug control in RC nitro-powered cars and models Switching high-power lighting systems in RC aircraft, boats, and cars Domestic appliance control for home automation projects Non-critical automotive electronics control such as glow wires

SmartElex DS3232 RTC (Real Time Clock) Breakout Module The SmartElex DS3232 RTC Breakout Module is a reliable DS3232 RTC module designed for accurate and long-term timekeeping in electronics and IoT projects. With an integrated crystal oscillator and temperature-compensated circuitry, it maintains precise date and time even under changing environmental conditions. This real-time clock module supports I²C communication, making it simple to interface with popular microcontrollers for applications such as data logging, digital clocks, alarms, and automation systems. A coin cell battery backup keeps the clock running during power loss, while its low power consumption and stable performance make it ideal for projects that demand exact timing and consistent operation over years. Features: Integrated crystal for accurate timekeeping. Temperature correction to reduce drift. Compact design that works well with breadboards. Works with I²C interface for microcontroller integration. Includes a coin cell battery backup for uninterrupted operation. Fully constructed and tested module ready for speedy deployment. Compatible with Arduino, Raspberry Pi, and other platforms. Low power usage results in longer battery life.

Cytron Maker UNO X – Arduino Compatible Development Board for Classroom The Cytron Maker UNO X is a beginner-friendly, classroom-ready Arduino-compatible development board designed to simplify STEM education. Equipped with built-in LEDs on every digital pin, a programmable push button, a piezo buzzer, and a powerbank-friendly design, it eliminates messy wiring and allows students to start coding instantly. This board is ideal for Arduino beginners, school STEM labs, coding clubs, training centers, and anyone learning microcontroller basics. With plug-and-play functionality and seamless compatibility with Arduino IDE, it delivers a smooth learning experience for educators and students alike. Created with the needs of teachers in mind, the Cytron Maker UNO X features an onboard half-size breadboard and perfboard for quick prototyping, making it easy to build hands-on electronics projects right out of the box. Powered by the ATmega328P, and complete with essential interfaces like UART, SPI, I2C, PWM pins, and analog inputs, this board is perfect for exploring coding, electronics, and robotics in a structured classroom setup. Whether for STEM workshops, school projects, or Arduino training programs, Maker UNO X provides an engaging, frustration-free learning experience. Features: Fully Arduino UNO-compatible board designed specially for classrooms and STEM beginners. Built-in LED indicators on every digital pin, allowing students to visualize code output instantly without wiring. Includes piezo buzzer, programmable push button, and powerbank-friendly operation for portable projects. Comes with an onboard perfboard prototyping area and a half-size breadboard to simplify hands-on experiments. Powered by the reliable ATmega328P microcontroller with 16MHz clock speed and full support in Arduino IDE. Offers 20 digital I/O pins, 6 PWM pins, 6 analog inputs, and communication interfaces (UART, SPI, I2C). Features 32KB Flash, 2KB SRAM, 1KB EEPROM, making it ideal for beginner programming and small-scale electronics projects. Uses a USB Micro-B interface with CH9340 USB-UART chip (note: not supported on Windows 7). Designed by Cytron to support educators - ensures faster learning with fewer wiring issues and more hands-on coding.

SmartElex PCA9546 4-Channel I2C Multiplexer Compatible with TCA9546A SmartElex PCA9546 4-Channel I2C Multiplexer is designed to simplify communication management when working with multiple I2C devices that share the same address. This compact module helps prevent signal conflicts by allowing users to connect and control up to four separate I2C buses from a single master device. It’s an ideal solution for students, makers, engineers, educators, and startups who are building projects where multiple sensors or modules need to coexist without addressing limitations or communication errors. Compatible with popular development platforms like Arduino, Raspberry Pi, and ESP32, this PCA9546 I2C multiplexer works as a practical I2C bus expander for robotics, IoT systems, automation projects, and prototype development. It offers a stable, plug-and-play approach to expanding I2C networks, making it easy to integrate sensors, displays, and controllers into both simple and advanced builds. Whether you are creating a multi-sensor environment, debugging complex circuits, or scaling an existing project, this module provides clear routing and dependable performance to streamline development. Features: Enables connection of up to four independent I2C device channels Prevents address conflicts by isolating I2C buses when needed Based on PCA9546 IC and compatible with TCA9546A devices Ideal for expanding I2C networks in multi-sensor projects Works with Arduino, Raspberry Pi, ESP32, and similar controllers Simple control through I2C commands for channel selection

7Semi MCP23017 I2C to 16 IO Expander Breakout Board The 7Semi MCP23017 I2C to 16 IO Expander Breakout Board is designed to expand the digital I/O capability of microcontrollers using the trusted MCP23017 I2C IO Expander IC. It provides exactly 16 configurable GPIO pins over a single I2C bus, reducing wiring complexity while maintaining stable performance. Each pin can be independently set as input or output, and the onboard interrupt feature allows the controller to respond instantly to pin state changes. This MCP23017 Breakout Board is compact, easy to integrate, and ideal for applications such as home automation, robotics, industrial control panels, and any project that requires multiple digital inputs and outputs without consuming extra microcontroller pins. Features: 16 I/O Pins: Converts two signal pins into sixteen completely customizable I/O pins. Multi-board Expansion: For larger applications, stack up to 8 boards to provide up to 128 I/O pins. Configure I2C addresses by setting the A0, A1, and A2 jumpers. Dual Connectivity: Includes PH2.0 terminal and solder pad choices for simple connection. Wide Compatibility: Compatible with both 3.3V and 5V systems, ensuring platform versatility. Interrupt Support: The INTA and INTB interrupt pins are used for real-time signal handling. Development Resources: Includes detailed instructions and sample projects for Raspberry Pi, Arduino, STM32, and micro. Easy Integration: The I2C interface, combined with a 4Pin 2.0 mm JST connector, provides for an easy and flexible connection to any MCU.

SmartElex Sound Detection Sensor The SmartElex Sound Detection Sensor is a compact and efficient sound sensor module designed to detect sound presence and measure sound intensity with precision. Built around the LM386 audio amplifier, it provides both analog (AOUT) and digital (DOUT) outputs, making it suitable for a wide range of applications—from simple sound-triggered actions to detailed audio level monitoring. Operating smoothly between 3.3V and 5.3V, this sound sensor Arduino compatible module integrates easily with popular development boards such as Arduino, STM32, and Raspberry Pi. Its low power consumption, small form factor, and included 4-pin cable make it perfect for sound-activated projects, noise detection systems, smart devices, and interactive electronics where reliable audio sensing is required. Features: LM386 audio amplifier for a powerful sound signal enhancement. Detect low-level sounds with 200× amplification. Wide voltage range: 3.3 to 5.3 volts Dual outputs: analog (AOUT) and digital (DOUT). Low power consumption, suitable for embedded systems. Adjustable gain using external components Compact and lightweight; breadboard-friendly. Simple integration with Arduino, STM32, and more.

SmartElex RedBot - Line Follower Sensor The SmartElex RedBot Line Follower Sensor is an easy-to-use infrared line tracking sensor designed to detect contrasting lines on the floor for robot navigation. It helps users build robots that can follow black or white track lines by sensing reflected infrared light, making it ideal for students, hobbyists, educators, and beginners in robotics. This line follower sensor removes the complexity of designing a tracking circuit from scratch, making it a practical choice for classroom learning, STEM competitions, and project-based exploration. This IR sensor line follower is commonly used in DIY robots, autonomous navigation systems, automation prototypes, and line-following competitions where reliable tracking is essential. It works smoothly with Arduino, Raspberry Pi, ESP32, and other microcontroller platforms, allowing easy integration and quick setup in existing projects. With stable performance and intuitive operation, the SmartElex RedBot Line Follower Sensor is well suited for prototyping, educational labs, and robotics builds requiring precise line tracking and direction control. Features: Infrared-based line detection for accurate track following Detects black or white line contrast for smooth navigation Simple design for beginner-friendly robotics and STEM projects Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact module for easy mounting on small robot chassis Ideal for DIY robots, automation prototypes, and line-following competitions

SmartElex LHI778 PIR Motion Sensor Module The SmartElex LHI778 PIR Motion Sensor Module is a passive infrared motion detection solution designed to sense human movement by detecting changes in infrared radiation. It helps solve the problem of automatic motion detection without continuous monitoring, making systems more energy efficient and responsive. This module is suitable for students, makers, engineers, educators, and startups working on electronics projects that require reliable motion sensing for control, security, or automation purposes. This PIR motion sensor module is widely used in robotics, IoT devices, security systems, and home or industrial automation projects where movement detection is required. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into prototypes and functional systems. The simple interface and consistent performance make it ideal for applications like motion-activated lighting, intrusion detection, smart alarms, and interactive electronic projects. Features: Passive infrared (PIR) sensor for reliable human motion detection Detects movement by sensing changes in infrared radiation Low power operation suitable for battery-powered projects Digital output for easy interfacing with microcontrollers Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Ideal for security systems, automation, and motion-activated applications

SmartElex AM312 PIR Motion Sensor The SmartElex AM312 PIR Motion Sensor is a compact passive infrared sensor designed to detect human motion by sensing changes in infrared radiation. It helps automate systems by triggering actions only when movement is detected, making projects more energy efficient and responsive. This sensor is well suited for students, makers, engineers, educators, and startups who are working on electronics projects that require reliable motion detection in a small, low-power form factor. This PIR motion sensor is ideal for robotics, IoT devices, security systems, and automation projects, especially where battery-powered operation is important. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into prototypes and functional systems. Common applications include motion-activated lighting, smart alarms, occupancy detection, and low-power IoT monitoring solutions, where stable performance and simple integration are essential. Features: Compact PIR sensor for reliable human motion detection Detects movement using changes in infrared radiation Ultra-low power consumption suitable for battery-powered projects Digital output for easy interfacing with microcontrollers Fast response time for real-time motion detection Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

SmartElex LIS3DH Triple Axis Accelerometer Breakout The SmartElex LIS3DH Triple Axis Accelerometer Breakout is a compact motion sensor module designed to measure acceleration along the X, Y, and Z axes. It helps users detect tilt, vibration, movement, and orientation, making it ideal for students, makers, educators, and engineers working on motion-responsive electronics. This lis3dh accelerometer offers a beginner-friendly way to collect movement data without complex circuitry, allowing users to focus on learning, building prototypes, or integrating sensors into real-world applications. This 3-axis accelerometer sensor is commonly used in robotics, handheld electronics, IoT devices, gesture recognition systems, and automation projects that require accurate motion sensing. It integrates smoothly with Arduino, Raspberry Pi, ESP32, and other microcontroller platforms, making programming and hardware connections straightforward. With reliable output and easy compatibility, the SmartElex LIS3DH sensor is a practical choice for prototyping, academic learning, DIY electronic builds, and product development where consistent acceleration measurement is required. Features: Triple-axis accelerometer for detecting movement and orientation Measures acceleration along X, Y, and Z axes with reliable output Compact breakout board for easy integration in embedded projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, IoT devices, gesture control, and automation projects Great for prototyping, STEM education, and motion-based product development

SmartElex BMM150 3 Axis Magnetometer Sensor The SmartElex BMM150 3 Axis Magnetometer Sensor is a compact digital sensor designed to measure magnetic fields along three axes. It helps users accurately detect orientation and heading, making it useful in projects where direction sensing and magnetic field measurement are required. This sensor is suitable for students, makers, engineers, educators, and startups working on embedded systems, learning projects, and prototype development that need reliable magnetic sensing in a small and easy-to-use form. This 3 axis magnetometer sensor is commonly used in robotics, IoT devices, navigation systems, and automation projects that require compass functionality or motion awareness. It can be easily integrated with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing smooth data communication and quick setup. The stable performance and simple interfacing make it ideal for applications like robot navigation, electronic compasses, orientation tracking, and smart sensor-based systems Note - The default configuration of module is I2C interface, for SPI interface remove I2C smd jumper & short SPI smd jumper on module. Features: Measures magnetic field strength along three axes (X, Y, and Z) Enables accurate heading and orientation detection Digital output for easy interfacing with microcontrollers Low power operation suitable for battery-powered projects Compact sensor design for space-constrained applications Compatible with Arduino, Raspberry Pi, ESP32, and other development boards