Mornsun LM350-10B24 AC/DC 350W Enclosed Switching Power Supply The LM350-10B24 is a 350W AC/DC switching power supply with a single output of 24V DC. It has a universal input voltage of 115VAC to 230VAC and a frequency range of 50Hz to 60Hz. The output voltage is adjustable from 0V to 24V and the output current is 14.6A. The power supply has a power factor correction (PFC) function that helps to improve the efficiency of the power supply and reduce the amount of power that is wasted. The power supply also has a number of safety features, including overvoltage protection, undervoltage protection, overcurrent protection, and short circuit protection. Features: Universal input voltage of 115VAC to 230VAC Frequency range of 50Hz to 60Hz Single output of 24V DC Output voltage adjustable from 0V to 24V Output current of 14.6A Power factor correction (PFC) function Overvoltage protection Undervoltage protection Overcurrent protection Short circuit protection check out : Mornsun LM350-12B12 AC/DC 350W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-10B36 AC/DC 350W Enclosed Switching Power Supply The LM350-10B36 is a cost-effective, enclosed AC-DC switching power supply from Mornsun. It features selectable AC input and DC input voltage, low no load power consumption, high efficiency, and high reliability. It also offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards. The LM350-10B36 is widely used in a variety of applications, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. check out : Mornsun LM350-10B05 AC/DC 350W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Also check Mornsun LM350-12B36 AC/DC 350W Enclosed Switching Power Supply . It is a power supply with a universal input voltage range of 176-264VAC or 240-373VDC. The output voltage is 36V, output current is 10A, and it has a power rating of 350W. The efficiency is up to 89% at 230VAC. The power supply features various safety measures, including short circuit protection, overvoltage protection, and overload protection.

Mornsun LM350-10B48 AC/DC 350W Enclosed Switching Power Supply The LM350-10B48 is an enclosed AC-DC switching power supply from Mornsun. It features a selectable AC input, DC input voltage acceptance, cost-effectiveness, low no load power consumption, high efficiency, and high reliability. It also offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards. It is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features Selectable AC input: The power supply can be powered by AC input voltages from 90 to 264 VAC. DC input voltage acceptance: The power supply can also be powered by DC input voltages from 240 to 373 VDC. Cost-effective: The LM350-10B48 is a cost-effective power supply that offers a good value for money. Low no load power consumption: The power supply consumes very little power when it is not in use, which can help to save energy costs. High efficiency: The power supply is highly efficient, which means that it converts a high percentage of the input power into output power. High reliability: The power supply is designed to be highly reliable and to provide long-lasting performance. Excellent EMC performance: The power supply offers excellent EMC performance, which means that it is less likely to interfere with other electronic devices. Meets industry standards: The power supply meets a number of industry standards, which means that it is safe and reliable to use. Wide range of applications: The LM350-10B48 is a versatile power supply that can be used in a wide range of applications. If you are looking for a cost-effective, reliable, and versatile AC-DC switching power supply, then the LM350-10B48 from Mornsun is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-12B05 AC/DC 350W Enclosed SMPS Sure. The LM350-12B05 is a 350W AC-DC switching power supply from Mornsun. It features a universal input voltage range of 176-264VAC or 240-373VDC, and can output a single regulated DC voltage of 12V. The power supply has a high efficiency of up to 87%, and is designed for use in a variety of applications, including industrial automation, control panels, and LED lighting. check out : Mornsun LM350-10B24 AC/DC 350W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-12B12 AC/DC 350W Enclosed Switching Power Supply The LM350-12B12 series is a cost-effective, enclosed AC-DC switching power supply from Mornsun. It features AC input and DC input voltage acceptance, low no load power consumption, high efficiency, high reliability, and double or reinforced insulation. The converters offer excellent EMC performance and meet a variety of standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, IEC/EN60335, GB4943, and IEC/EN61558. They are widely used in a variety of industries, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. Features AC input and DC input voltage acceptance Low no load power consumption High efficiency High reliability Double or reinforced insulation Excellent EMC performance Meets a variety of standards Widely used in a variety of industries check out : Mornsun LM350-12B05 AC/DC 350W Enclosed SMPS If you are looking for a cost-effective, enclosed AC-DC switching power supply with a variety of features, the LM350-12B12 series from Mornsun is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Also check the Mornsun LM350-12B48 AC/DC 350W Enclosed Switching Power Supply , It offers a universal input voltage range of 176 to 264 VAC or 240 to 370 VDC, with an output power of 350 watts at 48 volts DC. The power supply features high efficiency (up to 89%), low ripple noise (less than 1%), and operates in a temperature range of -30? to +70?. It includes protection features such as output short circuit, over-current, over-voltage, and over-temperature protection.

Mornsun LM350-12B15 AC/DC 350W Enclosed Switching Power Supply The LM350-12B15 is a 350 watt enclosed AC/DC switching power supply from Mornsun. It has a universal input voltage of 115VAC to 230VAC, 50/60Hz, and an output voltage of 12 volts. The output current is 23.2 amperes, for a total power output of 350 watts. The LM350-12B15 has a high efficiency of up to 88%, and it is also RoHS compliant. Features: Universal input voltage of 115VAC to 230VAC, 50/60Hz Output voltage of 12 volts Output current of 23.2 amperes Total power output of 350 watts High efficiency of up to 88% RoHS compliant check out : Mornsun LM350-22B24R2 AC/DC 350W Enclosed SMPS Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-12B24 AC/DC 350W Enclosed Switching Power Supply The LM350-12B24 is a cost-effective, reliable, and efficient enclosed AC-DC switching power supply from Mornsun. It features selectable AC input and accepts DC input voltage, making it versatile and easy to use. The LM350-12B24 meets a wide range of industry standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943. It is widely used in a variety of industries, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. Features Selectable AC input: The LM350-12B24 can accept input voltages from 85 to 264VAC, making it compatible with a wide range of power sources. DC input voltage acceptance: The LM350-12B24 can also accept input voltages from 9 to 35VDC, making it even more versatile. Cost-effective: The LM350-12B24 is a cost-effective solution for a variety of applications. Reliable: The LM350-12B24 is designed to be reliable and durable, with a long service life. Efficient: The LM350-12B24 is an efficient power supply, with a high power factor and low no-load power consumption. Meets industry standards: The LM350-12B24 meets a wide range of industry standards, making it a safe and reliable choice for a variety of applications. Widely used: The LM350-12B24 is widely used in a variety of industries, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. If you are looking for a cost-effective, reliable, and efficient AC-DC switching power supply, the LM350-12B24 from Mornsun is a great option. It features a wide range of capabilities and meets a variety of industry standards, making it a safe and reliable choice for a variety of applications. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-12B36 AC/DC 350W Enclosed Switching Power Supply The LM350-12B36 is a 36V, 350W AC/DC power supply that is ideal for a variety of applications, including industrial automation, control panels, and LED lighting. It features a universal input voltage range of 176-264VAC or 240-373VDC, and an efficiency of up to 89% at 230VAC. The LM350-12B36 also features a number of safety features, including short circuit protection, overvoltage protection, and overload protection. Features: Universal input voltage range: 176-264VAC or 240-373VDC Output voltage: 36V Output current: 10A Power: 350W Efficiency: up to 89% at 230VAC Short circuit protection Overvoltage protection Overload protection Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-12B48 AC/DC 350W Enclosed Switching Power Supply The LM350-12B48 is a universal input, enclosed, switch-mode power supply (SMPS) that provides 350 watts of output power at 48 volts DC. It has a wide input voltage range of 176 to 264 VAC or 240 to 370 VDC, and can be used in a variety of applications, including industrial, medical, and telecommunications. The LM350-12B48 features a high efficiency of up to 89%, which helps to reduce power consumption and heat dissipation. It also has a low ripple noise of less than 1%, which helps to protect sensitive electronic equipment. The LM350-12B48 is a reliable and versatile SMPS that can be used in a variety of applications. It is backed by a one-year warranty from Mornsun. Features: Universal input voltage range of 176 to 264 VAC or 240 to 370 VDC Output power of 350 watts Output voltage of 48 volts DC High efficiency of up to 89% Low ripple noise of less than 1% Enclosed case for protection from dust and debris Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM350-22B15R2 AC/DC 350W Enclosed SMPS The LM350-22B15R2 is an enclosed AC/DC converter from Mornsun. It is a compact and efficient power supply that is ideal for a variety of applications, including industrial, LED, streetlight control, electricity, security, telecommunications, and smart home. The LM350-22B15R2 features a universal AC input, accepts DC input voltage, is cost-effective, has low no-load power consumption, high efficiency, high reliability, and double or reinforced insulation. It also offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, UL/EN/IEC/BS EN62368, EN/IEC60335, EN651558, EN62477, GB4943 standards. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment