Monster Motor Driver Shield VNH2SP3014A (Peak 30A) The Monster Moto Shield VNH3SP30 Motor Driver is a more powerful version of our Ardumoto motor driver shield. We replaced the L298 H-bridge with a pair of VNH3SP30 full-bridge motor drivers for this Monster Moto Shield. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires. Also, the difference between the standard Arduino Motor shield and Monster Motor shield is the change in the driving IC. In the standard Arduino Motor shield the IC used is L298 H bridge IC which has a current capacity of 1 A which is replaced by the VNH3DP30 chip with a 14A continuous current capacity with heat dissipation devices installed. This motor driver also has a thermal shutdown function possible as the thermal output is provided on the analog pin of Arduino. Note: When using this board in extremely high-demand applications it may be necessary to improve thermal performance with a heat sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system). However, when using the board at currents up to 6A the chips will barely become noticeably warm. check out : DC Motor Drive Module 2 Channel Reversing PWM Speed Dual H Bridge Stepper Controller Features: Current sensing available to Arduino analog pin MOSFET on-resistance: 19 m? (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown

Mornsun KNX20-22A640 The KNX20-22A640 is a 20W AC-DC switching power supply that is suitable for use in home and building intelligent control in compliance with the KNX specification. It has a number of features that make it ideal for this application, including: A choke coil that provides a smooth output current A set of auxiliary power outputs for powering other devices An LED indicator that indicates multiple operating conditions A wide operating temperature range of -40°C to 75°C The KNX20-22A640 is also very easy to install and use. It can be mounted in any standard 19-inch rack and is compatible with a wide range of KNX devices.

Mornsun LI100-20B12PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B12PR2 is a cost-effective, energy efficient AC-DC converter from Mornsun. It is compliant with international EMC standards and is safety approved to a variety of safety standards. The converter is lightweight and has a compact design, making it ideal for space-saving applications. It is also ideal for harsh environments, such as industrial control equipment machinery. Features Universal input voltage: 85-264VAC or 120-370VDC Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -40? to +70? High I/O isolation test voltage up to 4000VAC Industrial-grade design OVC III (EN61558-1 standards) Low standby power consumption, high efficiency Low ripple & noise Output short circuit, over-current, over-voltage protection Withstand 300VAC surge input for 5s DIN rail TS35X7.5/ TS35X15 mountable Safety according to EN61558 If you are looking for a cost-effective, energy efficient AC-DC converter that is compliant with international standards and is safe for use in harsh environments, then the LI100-20B12PR2 is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI100-20B15PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B15PR2 is a cost-effective, energy efficient AC/DC converter from Mornsun. It is compliant with international IEC62368 standards for EMC and is safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368. The LI100-20B15PR2 has a high level of stability and immunity to noise, and is ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment. Features: Cost-effective Energy efficient Compliant with international IEC62368 standards for EMC Safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368 High level of stability and immunity to noise Ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI100-20B24PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B24PR2 is a cost-effective, energy-efficient AC-DC converter from Mornsun. It is compliant with international IEC62368 standards for EMC and is safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368. It has a high level of stability and immunity to noise, and is ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment. The LI100-20B24PR2 is a lightweight AC-DC converter with an extremely compact design for space saving. It is ideal for applications where space is limited, such as industrial control equipment and machinery. The LI100-20B24PR2 is also ideal for applications in harsh environments, such as those with high temperatures or humidity. Features Cost-effective Energy efficient Compliant with international IEC62368 standards for EMC Safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368 High level of stability and immunity to noise Ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment If you are looking for a cost-effective, energy-efficient AC-DC converter with a high level of stability and immunity to noise, the LI100-20B24PR2 is a great option. It is ideal for a variety of applications, including industrial control equipment, machinery, and all kinds of applications in a harsh environment. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Also check the Mornsun KNX20-22A640, a 20W AC-DC switching power supply designed for use in home and building intelligent control systems compliant with the KNX specification. It features a choke coil for smooth output current, auxiliary power outputs for other devices, an LED indicator for various operating conditions.

Mornsun LI100-20B48PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B48PR2 is a cost-effective, energy-efficient AC-DC converter from Mornsun. It is a lightweight AC-DC converter with an extremely compact design for space saving. It is compliant with international IEC62368 standards for EMC and is safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368. It has a high level of stability and immunity to noise, and is ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment. Features Cost-effective Energy efficient Compliant with international IEC62368 standards for EMC Safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368 High level of stability and immunity to noise Ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment If you are looking for a cost-effective, energy-efficient AC-DC converter with a high level of stability and immunity to noise, the LI100-20B48PR2 is a great option. It is ideal for a variety of applications, including industrial control equipment, machinery, and all kinds of applications in a harsh environment. check out : Mornsun LI100-20B24PR2 AC/DC 100W DIN-Rail Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI120-20B12R2S AC/DC 120W DIN-Rail Power Supply The LI120-20B12R2S is a cost-effective, energy efficient, and green AC-DC converter from Mornsun. It is a DIN-rail mounted power supply that offers a high level of stability and immunity to noise. It is ideal for use in industrial control equipment, machinery, and other industrial equipment in a variety of harsh environments. The LI120-20B12R2S is lightweight and compact, making it easy to install and save space. It is also compliant with international EMC and safety standards. Features: Cost-effective Energy efficient Green DIN-rail mounted High level of stability and immunity to noise Ideal for use in industrial control equipment, machinery, and other industrial equipment in a variety of harsh environments Lightweight and compact Compliant with international EMC and safety standards If you are looking for a cost-effective, energy efficient, and green AC-DC converter for your industrial application, the LI120-20B12R2S is a great option. It offers a high level of performance and reliability, and it is compliant with international standards. check out : Mornsun LI120-20B48R2S AC/DC 120W DIN-Rail Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI120-20B24R2S AC/DC 120W DIN-Rail Power Supply The LI120-20B24R2S is a 120W AC/DC power supply with a 24V output voltage and 5A output current. It is a universal input power supply, meaning that it can be powered from a wide range of input voltages, including 90-264VAC or 127-370VDC. The LI120-20B24R2S is also equipped with a number of safety features, including short circuit protection, overcurrent protection, overvoltage protection, and overtemperature protection. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LIT240-26B24 AC/DC 240W DIN-Rail Power Supply

Mornsun LI120-20B48R2S AC/DC 120W DIN-Rail Power Supply The LI120-20B48R2S is a cost-effective, energy-efficient, green AC-DC converter from Mornsun. It is designed for standard DIN-rail mounting and offers a high level of stability and immunity to noise. The converter is ideal for industrial control equipment, machinery, and other industrial equipment in a variety of harsh environments. It is also lightweight and has an extremely compact design, making it ideal for space-saving applications. The LI120-20B48R2S meets international EMC and safety standards, including UL61010, UL508, and EN/BS EN 62368. Features Cost-effective Energy-efficient Green Standard DIN-rail mounting High level of stability and immunity to noise Lightweight Extremely compact design Meets international EMC and safety standards The LI120-20B48R2S is a versatile and reliable AC-DC converter that is ideal for a wide range of applications. If you are looking for a cost-effective, energy-efficient, and green solution for your industrial control equipment, machinery, or other industrial equipment, the LI120-20B48R2S is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI15-20B05PR2 AC/DC 12W DIN-Rail Power Supply The LI15-20B05PR2 is a cost-effective, energy efficient AC-DC power supply from Mornsun. It is compliant with international IEC62368 standards for EMC and safety specifications, and it offers a high level of stability and immunity to noise. The LI15-20B05PR2 is also lightweight and compact, making it ideal for space-saving applications. It is ideal for industrial control equipment, machinery, and other harsh environments. Features Universal input voltage of 85-264VAC or 120-370VDC Output voltage of 5V Output current of 2.4A Efficiency up to 94.5% High I/O isolation test voltage up to 3000VAC DC OK function Active PFC, PF > 0.99 Low ripple & noise Output short circuit, over-current, over-voltage, over-temperature protection, input undervoltage protection DIN rail TS-35/7.5 or 15 mountable Ultra slim design with 48mm width Withstand 305VAC input voltage 5S Safety according to IEC/UL62368, EN61558 If you are looking for a cost-effective, energy efficient, and reliable AC-DC power supply, the LI15-20B05PR2 is a great option. It is ideal for a variety of applications, including industrial control equipment, machinery, and other harsh environments. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment