Mornsun LM150-23B24 AC/DC 150W Enclosed Switching Power Supply The LM150-23B24 is a 150W AC/DC enclosed switching power supply from Mornsun. It has a universal input voltage range of 85-305VAC and a single output voltage of 24V. The output current is 6.5A, and the efficiency is up to 88%. The power supply is also equipped with a power factor correction (PFC) function, which helps to reduce the power consumption of the device. check out : Mornsun LMF100-23B12 AC/DC 100W Enclosed Switching Power Supply Features: Universal input voltage range of 85-305VAC Single output voltage of 24V Output current of 6.5A Efficiency of up to 88% Power factor correction (PFC) function Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM150-23B36 AC/DC 150W Enclosed Switching Power Supply The LM150-23B36 is a 150 watt, 23 volt AC/DC power supply from Mornsun America, LLC. It is a closed-loop, constant-current, constant-voltage power supply with a universal input voltage range of 90 to 264 VAC. The LM150-23B36 has a ripple and noise rejection of 60 dB and a transient response time of <1 microsecond. It is also equipped with a thermal overload protection circuit and a short circuit protection circuit. The LM150-23B36 is a versatile power supply that can be used in a variety of applications, including industrial control, medical equipment, and telecommunications. It is also a good choice for use in high-reliability applications where high ripple and noise rejection and fast transient response are required. Features: 150 watt output power 23 volt output voltage Universal input voltage range of 90 to 264 VAC Closed-loop, constant-current, constant-voltage regulation Ripple and noise rejection of 60 dB Transient response time of <1 microsecond Thermal overload protection Short circuit protection Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM150-23B48 AC/DC 150W Enclosed Switching Power Supply The LM150-23B48 is a high-performance, enclosed AC/DC converter from Mornsun. It is designed for a wide input voltage range of 85 to 305 VAC or 120 to 430 VDC, and can output up to 150 watts at 48 volts. The LM150-23B48 features a high efficiency of up to 89%, and a ripple rejection of up to 80dB. It is also equipped with a number of safety features, including overvoltage protection, undervoltage protection, overcurrent protection, and short circuit protection. Features: High efficiency of up to 89% Ripple rejection of up to 80dB Wide input voltage range of 85 to 305 VAC or 120 to 430 VDC Output voltage of 48 volts Output current of 3.33 amps Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM150-23B55 AC/DC 150W Enclosed Switching Power Supply The LM150-23B55 is a small outline switch-mode power supply (SMPS) from Mornsun. It has an input voltage range of 85 to 305 VAC or 120 to 430 VDC, and an output voltage of 55 VDC at 2.73A. The efficiency is up to 90%, and the isolation voltage is 4000 VAC. The power supply is housed in a metal case and has terminal block terminals. Features: Small outline design Wide input voltage range High output current High efficiency 4000 VAC isolation Metal case Terminal block terminals Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM200-10B12 AC/DC 200W Enclosed Switching Power Supply The LM200-10B12 is an enclosed AC-DC switching power supply from Mornsun. It features a selectable AC input, accepts DC input voltage, is cost-effective, has low no-load power consumption, high efficiency, and high reliability. The power supply offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, GB4943 standards. It is widely used in a variety of applications, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. Features Selectable AC input Accepts DC input voltage Cost-effective Low no-load power consumption High efficiency High reliability Excellent EMC performance Meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, GB4943 standards Widely used in a variety of applications check out : Mornsun LM350-10B12 AC/DC 350W Enclosed Switching Power Supply If you are looking for a reliable and efficient AC-DC switching power supply, the LM200-10B12 is a great option. It is perfect for a variety of applications, and it meets the latest safety and performance standards. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM200-12B24 AC/DC 200W Enclosed Switching Power Supply

Mornsun LM200-10B15 AC/DC 200W Enclosed Switching Power Supply The LM200-10B15 is a cost-effective, reliable, and efficient enclosed AC-DC switching power supply from Mornsun. It features selectable AC input and DC input voltage, low no load power consumption, and high EMC performance. The LM200-10B15 meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards, and is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features Selectable AC input and DC input voltage Low no load power consumption High EMC performance Meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards Widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications check out : Mornsun LM200-10B48 AC/DC 200W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM200-12B12 AC/DC 200W Enclosed Switching Power Supply

Mornsun LM200-10B24 AC/DC 200W Enclosed Switching Power Supply The LM200-10B24 is a 211.2W AC/DC enclosed switching power supply with a single output of 24V and 8.8A. It has a universal input voltage of 85-264VAC or 120-370VDC, and a maximum efficiency of 88%. The power supply is protected against output short circuit, over current, over voltage, and over temperature. It is also RoHS compliant. Features: Universal input voltage of 85-264VAC or 120-370VDC Single output of 24V and 8.8A Maximum efficiency of 88% Protected against output short circuit, over current, over voltage, and over temperature RoHS compliant Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM200-10B36 AC/DC 200W Enclosed Switching Power Supply The LM200-10B36 is an enclosed AC-DC switching power supply from Mornsun. It features a selectable AC input, DC input voltage acceptance, cost-effectiveness, low no load power consumption, high efficiency, and high reliability. It offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards. It is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features Selectable AC input: The LM200-10B36 can be powered by a wide range of AC input voltages, from 90 to 264 VAC. DC input voltage acceptance: The LM200-10B36 can also be powered by a DC input voltage, from 240 to 373 VDC. Cost-effective: The LM200-10B36 is a cost-effective solution for a wide range of applications. Low no load power consumption: The LM200-10B36 consumes very little power when it is not in use, which can help to save energy costs. High efficiency: The LM200-10B36 is highly efficient, which can help to reduce energy costs and extend the life of the product. High reliability: The LM200-10B36 is designed to be highly reliable, and it is backed by a one-year warranty. If you are looking for an enclosed AC-DC switching power supply with a wide range of features and benefits, the LM200-10B36 is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM200-10B48 AC/DC 200W Enclosed Switching Power Supply The LM200-10B48 is a cost-effective, reliable, and efficient AC-DC switching power supply from Mornsun. It features a selectable AC input range, DC input voltage acceptance, low no-load power consumption, and excellent EMC performance. The LM200-10B48 meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards. It is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features: Selectable AC input range: 90-132VAC/180-264VAC DC input range: 240-370VDC (switch in position of 230) Ultra low standby power consumption: <0.75W @ 230VAC Operating ambient temperature range: -30°C to +70°C High efficiency: up to 89.5% High reliability: meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards Wide range of applications: industrial, LED, street light control, electricity, security, telecommunications, and smart home check out : Mornsun LM200-10B15 AC/DC 200W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM200-12B05 AC/DC 200W Enclosed Switching Power Supply The LM200-12B05 is an enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage of 90-264VAC, 50/60Hz, and can output a constant 12V DC at up to 150W. The power supply is also equipped with short circuit, over voltage, over current, and over temperature protection. Features: Universal input voltage: 90-264VAC, 50/60Hz Output voltage: 12V DC Output current: 150W Short circuit protection Over voltage protection Over current protection Over temperature protection check out : Mornsun LM150-23B36 AC/DC 150W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment