Mornsun LM50-20B48 AC/DC 50W Enclosed SMPS The LM50-20B48 series is an enclosed AC-DC switching power supply from Mornsun. It features a universal AC input, accepts DC input voltage, is cost-effective, has low no-load power consumption, high efficiency, high reliability, and double or reinforced insulation. It also offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, IEC/EN60335, GB4943,IEC/EN61558 standards. It is widely used in a variety of industries, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. Features Universal AC input Accepts DC input voltage Cost-effective Low no-load power consumption High efficiency High reliability Double or reinforced insulation Excellent EMC performance Meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, IEC/EN60335, GB4943,IEC/EN61558 standards Widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications check out : Mornsun LM50-22B24 AC/DC 50W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM50-23B15 AC/DC 50W Enclosed Switching Power Supply

Mornsun LM50-22B12 AC/DC 50W Enclosed Switching Power Supply The LM50-22B12 series is a line of enclosed AC-DC switching power supplies from Mornsun. They feature AC input and DC input voltage acceptance, cost-effectiveness, low no-load power consumption, high efficiency, high reliability, and double or reinforced insulation. These converters offer excellent EMC performance and meet a variety of standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, IEC/EN60335, GB4943, and IEC/EN61558. They are widely used in a variety of applications, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. Features: Power output: 50.4 watts Input voltage: 165 to 264 volts AC or 180 to 373 volts DC Output voltage: 12 volts DC Output current: 4.2 amps Efficiency: 87% Isolation voltage: 4000 volts AC Dimensions: 150 x 100 x 55 millimeters Weight: 450 grams Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-22B15 AC/DC 50W Enclosed Switching Power Supply The LM50-22B15 is a 50W AC/DC switching power supply from Mornsun. It features an AC input voltage range of 85 to 264VAC, a DC output voltage of 15VDC, and a maximum output current of 3.4A. The LM50-22B15 is also equipped with a number of features that make it ideal for a variety of applications, including: High efficiency: The LM50-22B15 has a high efficiency of up to 88%, which helps to reduce energy consumption and heat dissipation. Low no-load power consumption: The LM50-22B15 has a low no-load power consumption of less than 1W, which helps to save energy when the power supply is not in use. Double or reinforced insulation: The LM50-22B15 features double or reinforced insulation, which helps to protect against electrical shock. Excellent EMC performance: The LM50-22B15 meets a number of EMC standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943. The LM50-22B15 is a versatile and reliable AC/DC switching power supply that is ideal for a wide range of applications. It is commonly used in industrial automation, control panels, LED lights, and other applications that require a reliable and efficient power supply. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-22B24 AC/DC 50W Enclosed Switching Power Supply The LM50-22B24 is an enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage range of 165 - 264VAC or 180 - 370VDC, accepts DC input voltage, is cost-effective, has low no load power consumption, high efficiency, high reliability, and double or reinforced insulation. It also offers excellent EMC performance and meets a variety of international standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943. It is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features Universal input voltage range: 165 - 264VAC or 180 - 370VDC Accepts DC input voltage Cost-effective Low no load power consumption High efficiency High reliability Double or reinforced insulation Excellent EMC performance Meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards Wide range of applications: industrial, LED, street light control, electricity, security, telecommunications, and smart home Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-22B36 AC/DC 50W Enclosed Switching Power Supply The LM50-22B36 is a 50W AC/DC power supply that features a universal input voltage of 165 - 264VAC or 180 - 370VDC. It can also accept AC or DC input (dual-use of same terminal). The LM50-22B36 has an operating ambient temperature range of -30? to +70?, low standby power consumption, and high efficiency. It also has a high I/O isolation test voltage up to 4000VAC, low ripple & noise, and output short circuit, over-current, over-voltage protection. The LM50-22B36 is over-voltage class ? (designed to meet EN61558) and can operate at an altitude of up to 5000m. Features: Universal input voltage: 165 - 264VAC or 180 - 370VDC Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -30? to +70? Low standby power consumption, high efficiency High I/O isolation test voltage up to 4000VAC Low ripple & noise Output short circuit, over-current, over-voltage protection Over-voltage class ? (designed to meet EN61558) Operating altitude up to 5000m check out : Mornsun LM50-22B48 AC/DC 50W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-22B48 AC/DC 50W Enclosed Switching Power Supply The LM50-22B48 is a 52.8W enclosed AC/DC switching power supply from Mornsun. It features a universal input voltage of 165-264 VAC or 180-370 VDC, and can accept AC or DC input (dual-use of same terminal). The LM50-22B48 has an operating ambient temperature range of -30? to +70?, low standby power consumption, high efficiency, and high I/O isolation test voltage up to 4000 VAC. It also has low ripple & noise, output short circuit, over-current, over-voltage protection, over-voltage class ? (designed to meet EN61558), and can operate at altitudes up to 5000 m. Features: Universal input voltage of 165-264 VAC or 180-370 VDC Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range of -30? to +70? Low standby power consumption High efficiency High I/O isolation test voltage up to 4000 VAC Low ripple & noise Output short circuit, over-current, over-voltage protection Over-voltage class ? (designed to meet EN61558) Can operate at altitudes up to 5000 m check out : Mornsun LM50-22B36 AC/DC 50W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-23B12R2 AC/DC 50W Enclosed SMPS The LM50-23B12R2 is a 50W, 12V AC/DC power supply from Mornsun. It has a wide input voltage range of 80-305VAC and 100-430VDC, making it suitable for use in a variety of applications. The power supply also features a number of safety protections, including overvoltage, undervoltage, overcurrent, and short circuit protection. check out : Mornsun LM50-23B36 AC/DC 50W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM50-20B48 AC/DC 50W Enclosed SMPS

Mornsun LM50-23B15 AC/DC 50W Enclosed Switching Power Supply The LM50-23B15 is an enclosed AC/DC converter from Mornsun America, LLC. It has a single output of 15V and can be powered from 85 to 305 VAC or 120 to 430 VDC. The converter is rated for 50W output and has a ripple of less than 1%. It is also protected against overvoltage, overcurrent, and short circuit. Features: Single output of 15V Input voltage range: 85 to 305 VAC or 120 to 430 VDC Output power: 50W Ripple: <1% Overvoltage protection Overcurrent protection Short circuit protection check out : Mornsun LM50-22B15 AC/DC 50W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-23B24 AC/DC 50W Enclosed Switching Power Supply The LM50-23B24 is a 24V, 2.2A, 52.8W AC/DC power supply from Mornsun. It has a wide input voltage range of 85-305VAC or 120-430VDC, and can be used in a variety of applications, such as industrial control, automation, and telecommunications. The LM50-23B24 features a high efficiency of up to 88%, which helps to reduce power consumption and heat dissipation. It also has a built-in thermal overload protection circuit that prevents the unit from overheating. The LM50-23B24 is a compact and lightweight unit that is easy to install and use. It is also RoHS compliant and comes with a one-year warranty. Features: 24V, 2.2A output 52.8W output power Wide input voltage range: 85-305VAC or 120-430VDC High efficiency up to 88% Built-in thermal overload protection Compact and lightweight design RoHS compliant One-year warranty Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM50-23B24R2 AC/DC 50W Enclosed Switching Power Supply The LM50-23B24R2 is a compact, enclosed AC/DC power supply from Mornsun. It has a universal AC input voltage range of 80-305 VAC or 100-430 VDC, and a single output of 24 VDC at 2.2A. The efficiency of the power supply is up to 89.5%, and it has an isolation voltage of 4000 VAC. The power supply is also protected against overvoltage, undervoltage, overcurrent, and short circuits. The LM50-23B24R2 is a versatile power supply that can be used in a variety of applications, including industrial control, automation, and telecommunications. It is also a good choice for use in harsh environments, as it is protected against dust and moisture. check out : Mornsun LM50-23B12R2 AC/DC 50W Enclosed SMPS Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units The power supply is considered a component which will be installed into a final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM50-20B12 AC/DC 50W Enclosed SMPS