Mornsun LM75-20B48 AC/DC 75W Enclosed Switching Power Supply The LM75-20B48 is an enclosed AC-DC switching power supply from Mornsun. It features a universal AC input, DC input voltage acceptance, cost-effectiveness, low no-load power consumption, high efficiency, high reliability, and double or reinforced insulation. It offers excellent EMC performance and meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards. It is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features: Universal AC input: The LM75-20B48 can be powered by AC input voltages ranging from 85 to 264 VAC. DC input voltage acceptance: The LM75-20B48 can also be powered by DC input voltages ranging from 120 to 373 VDC. Cost-effective: The LM75-20B48 is a cost-effective solution for a wide range of applications. Low no-load power consumption: The LM75-20B48 has a low no-load power consumption, which helps to save energy. High efficiency: The LM75-20B48 is a high-efficiency power supply, which helps to reduce energy costs. High reliability: The LM75-20B48 is a reliable power supply that is designed to withstand harsh environments. Double or reinforced insulation: The LM75-20B48 features double or reinforced insulation for safety. Excellent EMC performance: The LM75-20B48 offers excellent EMC performance, which helps to reduce interference with other electronic devices. Meets international standards: The LM75-20B48 meets international standards, such as IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943. Widely used: The LM75-20B48 is widely used in a variety of applications, such as industrial, LED, street light control, electricity, security, telecommunications, and smart home. check out : Mornsun LM75-20B36 AC/DC 75W Enclosed Switching Power Supply If you are looking for a reliable, cost-effective, and high-performance AC-DC switching power supply, the LM75-20B48 is a great option. It is a versatile power supply that can be used in a wide range of applications. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-22B05 AC/DC 75W Enclosed Switching Power Supply The LM75-22B05 is a 70W AC/DC enclosed power supply that is ideal for a variety of applications, including industrial control, medical equipment, and telecommunications. It features a universal input voltage of 85-264VAC or 120-373VDC, a single output voltage of 5V, and a maximum output current of 14A. The LM75-22B05 also features a high efficiency of up to 86%, which helps to reduce power consumption and operating costs. Features Universal input voltage of 85-264VAC or 120-373VDC Single output voltage of 5V Maximum output current of 14A High efficiency of up to 86% Overvoltage, undervoltage, and overcurrent protection Short circuit protection Thermal overload protection check out : Mornsun LM75-23B48 AC/DC 75W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-22B12 AC/DC 75W Enclosed Switching Power Supply The LM75-22B12 is an enclosed AC-DC switching power supply from Mornsun. It features a universal AC input, DC input voltage acceptance, low no load power consumption, high efficiency, high reliability, and double or reinforced insulation. It also offers excellent EMC performance and meets the following standards: IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, IEC/EN60335, GB4943, and IEC/EN61558. The LM75-22B12 is widely used in a variety of industries, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-22B15 AC/DC 75W Enclosed Switching Power Supply The LM75-22B15 is a 75W AC/DC enclosed SMPS power supply from Mornsun. It has a universal input voltage range of 85-264VAC and an output voltage of 15VDC. The power supply is also equipped with a number of features, including overload protection, overtemperature protection, and short circuit protection. Features: Universal input voltage range of 85-264VAC Output voltage of 15VDC Overload protection Overtemperature protection Short circuit protection check out : Mornsun LM75-22B36 AC/DC 75W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-22B24 AC/DC 75W Enclosed Switching Power Supply The LM75-22B24 is an enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage range of 165 - 264VAC or 180 - 370VDC, accepts DC input voltage, is cost-effective, has low no load power consumption, high efficiency, high reliability, and double or reinforced insulation. It also offers excellent EMC performance and meets a variety of international standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943. It is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Features Universal input voltage range: 165 - 264VAC or 180 - 370VDC Accepts DC input voltage Cost-effective Low no load power consumption High efficiency High reliability Double or reinforced insulation Excellent EMC performance Meets IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, and GB4943 standards Wide range of applications: industrial, LED, street light control, electricity, security, telecommunications, and smart home Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-22B36 AC/DC 75W Enclosed Switching Power Supply The LM75-22B36 is a universal input, enclosed, switching power supply (SMPS) that provides 75 watts of output power at 36 volts DC. It has a universal input voltage range of 90 to 264 VAC and a power factor correction (PFC) efficiency of up to 90%. The LM75-22B36 is also equipped with a number of safety features, including overvoltage protection, overcurrent protection, and short circuit protection. Features: Universal input voltage range of 90 to 264 VAC Output voltage of 36 volts DC Output current of 2.1 amps Power output of 75 watts Power factor correction (PFC) efficiency of up to 90% Overvoltage protection Overcurrent protection Short circuit protection Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-22B48 AC/DC 75W Enclosed Switching Power Supply The LM75-22B48 is a 75W, universal input, enclosed AC/DC power supply from Mornsun. It has a wide input voltage range of 165-264VAC or 200-373VDC, and can output a single regulated DC voltage of 48V at up to 1.6A. The power supply is also equipped with a number of features for safety and reliability, including overvoltage protection, undervoltage protection, overcurrent protection, and short circuit protection. Features: Universal input voltage range of 165-264VAC or 200-373VDC Single regulated DC output of 48V at up to 1.6A Overvoltage protection Undervoltage protection Overcurrent protection Short circuit protection Built-in fan for cooling Enclosed housing for protection from dust and debris check out : Mornsun LM75-23B24 AC/DC 75W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-23B05 AC/DC 75W Enclosed Switching Power Supply The LM75-23B05 is a 5V, 70W, enclosed AC/DC converter with a wide input voltage range of 85-305 VAC or 120-430 VDC. It has a high efficiency of up to 85% and can output up to 14A of current. The LM75-23B05 is also isolated from the input voltage, making it safe to use in applications where there is a risk of electrical shock. Features: 5V output 70W output power Wide input voltage range (85-305 VAC or 120-430 VDC) High efficiency (up to 85%) 14A output current Isolated from input voltage Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LM75-23B12R2 AC/DC 75W Enclosed SMPS The LM75-23B12R2 is a compact, enclosed AC/DC converter that provides a regulated 12V output at up to 6A. It has a universal input voltage range of 80-305VAC or 100-430VDC, making it suitable for a wide variety of applications. The LM75-23B12R2 also features a high efficiency of up to 89%, low no-load power consumption, and double or reinforced insulation for safety. check out : Mornsun LM75-23B05 AC/DC 75W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM75-23B24R2 AC/DC 75W Enclosed SMPS

Mornsun LM75-23B15 AC/DC 75W Enclosed Switching Power Supply The LM75-23B15 is a 15V, 2.5A enclosed AC-DC switching power supply from Mornsun. It features a universal AC input voltage range of 85-305VAC, a DC input voltage range of 120-430VDC, and a high efficiency of up to 95%. The LM75-23B15 also has a low no-load power consumption of less than 1W, making it a cost-effective and energy-efficient solution for a variety of applications. Features: Universal AC input voltage range of 85-305VAC DC input voltage range of 120-430VDC High efficiency of up to 95% Low no-load power consumption of less than 1W Enclosed housing for protection against dust and moisture Built-in thermal protection for overload and overtemperature conditions Short circuit protection Overvoltage protection Overcurrent protection check out : Mornsun LM75-20B24 AC/DC 75W Enclosed SMPS Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment