Mornsun LO45-10B48 AC/DC Converter The LO45-10B48 is a compact, high-efficiency AC/DC converter that provides a regulated output voltage of 48V at a maximum current of 940mA. It has a universal input voltage range of 85-264VAC or 100-370VDC, making it suitable for use in a wide variety of applications. The LO45-10B48 also features short circuit, over-current, and over-voltage protection, as well as low ripple and noise. It is certified to IEC/EN61000-4 and CISPR32/EN55032 and meets UL/EN/IEC62368 standards. Features: Compact size High efficiency Universal input voltage range Regulated output voltage Short circuit, over-current, and over-voltage protection Low ripple and noise IEC/EN61000-4 and CISPR32/EN55032 certified UL/EN/IEC62368 compliant

Mornsun LO45-20B12MU AC/DC Converter The LO45-20B12MU is a 45W AC-DC converter that provides a regulated 12V output. It has a universal input voltage range of 85-264VAC or 100-370VDC, making it suitable for use in a variety of applications. The converter is also small and lightweight, making it easy to install and transport. Features: Universal input voltage range of 85-264VAC or 100-370VDC Regulated 12V output Output current of 3.75A Small and lightweight design High efficiency and reliability Meets safety standards IEC/EN/ES60601-1, UL/EN/IEC62368-1, IEC/EN60335-1, IEC/EN61558-1, GB4943-1

Mornsun LO65-10B12 AC/DC Converter The LO65-10B12 is a 65W open-frame AC/DC converter from Mornsun. It has a single 12V output and is suitable for a wide range of applications, including CCTV, LED lighting, and industrial control. The converter features a universal AC input voltage range of 85-264VAC and a DC input voltage range of 100-370VDC. It also has a high power density of 2.17W/in². Features: 65W output power Single 12V output Universal AC input voltage range of 85-264VAC DC input voltage range of 100-370VDC High power density of 2.17W/in² Short circuit protection Overvoltage protection Overcurrent protection Overtemperature protection Overload protection

Mornsun LO65-10B24 AC/DC Converter The LO65-10B24 is a 65W open-frame AC/DC power supply from Mornsun. It has a single output of 24VDC and a high power density of 3 x 0.2 inches. The unit features a universal AC input and can also accept DC input voltage. It is designed for use in a variety of applications, including industrial control, networking, and telecommunications. Features: 65W output power 24VDC output voltage High power density of 3 x 0.2 inches Universal AC input Accepts DC input voltage Designed for use in a variety of applications

Motorola SN74LS48N IC BCD TO 7-Segment Decoder If you want the best solution for driving 7-segment displays then check out the Motorola SN74LS48N IC BCD to 7-Segment Decoder. This small chip converts 4-bit binary numbers into numbers that can be read on a 7-segment display. It works great and has features like automatic zero-blanking to keep the screen clear. Because of the built-in resistors, you can also modify the brightness of the lights without the need for additional parts. It's an excellent solution for any project requiring easy-to-read displays.

Mounting Bracket for HC-SR04 Ultrasonic Module Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Bracket you can attach the HC-SR04 module to your application such as small robots or DIY projects very quickly and conveniently. Note: This package does not include ultrasonic sensor.

MP1584EN Mini LM2596 ultra-small DC-DC step-down The MP1584 is a high frequency step-down switching regulator with an integrated internal high-side high voltage power MOSFET. It provides 3A output with current mode control for fast loop response and easy compensation. DC-DC step-down ( buck converter ) module is based on MP1584EN chip, this is capable of driving a 3A load and converts input voltage between 4.5 V to 28 V into a smaller voltage between 0.8 V to 20 V. The wide 4.5V to 28V input range accommodates a variety of step-down applications, including those in an automotive input environment. A 100µA operational quiescent current allows use in battery-powered applications.  High power conversion efficiency over a wide load range is achieved by scaling down the switching frequency at light load condition to reduce the switching and gate driving losses. The frequency foldback helps prevent inductor current runaway during startup and thermal shutdown provides reliable, fault tolerant operation.  By switching at 1.5MHz, the MP1584 is able to prevent EMI (Electromagnetic Interference) noise problems, such as those found in AM radio and ADSL applications. Application: DIY mobile power, monitor power supply, camera power supply, communications equipment supply, etc. High Voltage Power Conversion Automotive Systems Industrial Power Systems Distributed Power Systems Battery Powered Systems Features Wide 4.5V to 28V Operating Input Range High-Efficiency Pulse Skipping Mode for Light Load Ceramic Capacitor Stable Internal Soft-Start Internally Set Current Limit without a Current Sensing Resistor Also check AMS1117 5V Step-Down Power Supply Module . It is a step-down power supply module (buck converter) that utilizes the AMS1117 5V regulator to regulate input voltage in the range of 6.0 to 12V down to a fixed 5V output at a maximum of 1A. The module features onboard AMS1117 chip, a red LED power indicator, and 4Pin Type, making it breadboard-friendly

MPR121 - 12 Channel Capacitive Touch Sensor Controller Module - I2C Interface The MPR121 12-Channel Capacitive Touch Sensor Controller Module is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. This is a breakout board for NXP/ Freescale’s MPR121QR2. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs. There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don’t require the pull-up resistors you can open the jumpers by cutting the trace connecting them. There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can’t operate the MPR121 in low-supply voltage mode (1.71-2.75VDC). Pin Diagram of MPR121-12 Channel Touch Sensor Module:

MPU-6050 Triple-Axis Accelerometer Gyroscope Module The MPU6050 is an IMU (Inertial Estimation Unit) sensor, a portion of the Micro-Electro-Mechanical Systems (MEMS) family. It highlights a 3-axis accelerometer and a 3-axis gyroscope. The MPU-6050 module in addition called a magnetometer sensor. It can identify acceleration up in three measurements (X, Y, and Z) and also measure angular velocity around those axes. This motion-tracking device is often used in applications such as detecting the orientation of a device, detecting movement, and measuring angular velocity. The Inertial measurement unit sensor contains some additional circuitry for interfacing with a microcontroller or other device. The MPU6050 offers precise tracking for both quick and gradual movements. It includes a user-programmable gyroscope with a full-scale range of ±250, ±500, ±1000, and ±2000°/sec (DPS). Additionally, it features a user-programmable accelerometer with a full-scale range of ±2g, ±4g, ±8g, and ±16g. Read our blog explaining the Interfacing mpu6050 with Raspberry Pi , It covers step by step process. Key Features: I2C Digital Output of 6/9-axis MotionFusion data in various formats such as Euler Angle, Quaternion, Rotation Matrix, or Raw Data. Chip built-in 16-bit AD converter, 16-bit data output. Voltage Range: 2.3V to 3.4V. Selectable Jumpers: CLK, FSYNC, AD0. Gyro: ±250 to ±2000dps sensitivity. Accelerometer: ±2g to ±16g programmable range. DMP™ Engine: Offloads MotionFusion, sync, and gesture detection. Embedded Algorithms: Run-time bias and compass calibration. Digital Temperature Sensor: Output for temperature monitoring. Differences Between MPU6000, MPU6050 and MPU6500: MPU6000 Sensor: Offers an 8 kHz sampling rate, supporting both SPI and I2C interfaces. However, the I2C interface might be insufficient for handling an 8 kHz gyro update due to its slower nature. It boasts improved vibration sensitivity compared to the MPU6500. MPU6050 Sensor: It offers an 8 kHz sampling rate and utilizes the I2C interface communication protocol. It exhibits superior vibration sensitivity compared to the MPU6500. MPU6500 Sensor: It offers a 32 kHz sampling rate and compatibility with both I2C and SPI interfaces. Due to increased sensitivity to vibrations, it may require additional vibration isolation methods for optimal performance. Pinout:

MPU-6050 Triple-Axis Accelerometer & Gyroscope Module The MPU-6050 Triple-Axis Accelerometer & Gyroscope Module is a 6-axis motion tracking device that consists of a 3-axis accelerometer and a 3-axis gyroscope. It can measure acceleration in 3 dimensions (X, Y, and Z) as well as angular velocity about those axes. The sensor is often used in applications such as detecting the orientation of a device, detecting movement and measuring angular velocity. The module you mentioned likely contains the MPU-6050 sensor and some additional circuitry for interfacing with a microcontroller or other device. For precision tracking of both fast and slow motions, the MPU-60X0 features a user-programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (DPS). The parts also have a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g. The MPU-6000 family is comprised of two parts, the MPU-6000 and MPU-6050. These parts are identical to each other with two exceptions. The MPU-6050 supports I2C communications at up to 400kHz and has a VLOGIC pin that defines its interface voltage levels; the MPU-6000 supports SPI at up to 20MHz in addition to I2C and has a single supply pin, VDD, which is both the device’s logic reference supply and the analog supply for the part.