40Kgcm High Torque Servo Motor (S8218) The 40Kg-cm Servo Motor (S8218) is a well-designed and high-quality servo that is digital, and fitted with metal gears for reliability. This is a digital servo motor for a wide range of applications that requires high torque. You can control this servo motor with Arduino which is connect by jumper wires and powered by battery . The metal gears ensure long life and torque conversion. It is made of high-quality material, which may make your operation much more remarkable. This product is a metal gear high torque servo motor. This Motor is compatible with Futuba, JR, Sanwa, and Hitee series. The speed rate is 0.20--0.22sec/60°at (6V). 0.18--0.2sec/60°at (7.2V). Applications: Solar array and antenna positioning Automatic doors Remote control toys DIY Robotic Projects read our blog explaining servo vs dc motor (the Difference Between Servo Motor vs DC Motor).

40mm Aluminium Alloy Water Cooling Block The water cooling block is manufactured with aluminium and is designed with a 40mm dimension. It has internal extrusions for optimum internal flow. Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling. The 40mm water cooling block has a heavy aluminium build and has an extrusion for internal channel flow. Features: Heavy Aluminium build Internal flow channel extrusion forming

40W Hot Melt Glue Gun This 40W hot melt glue gun is a multipurpose device with Superior quality and user-friendly features. This hot glue gun is integrated with an On/Off switch for easier operations. It is extensively used in the toys, home appliance, furniture, fancy items, packaging, shipping companies as well as in DIY projects by hobbyist people and others. How to use Glue Gun: Plug in gun. Load the glue stick into the back of the gun. Press trigger several times until the glue stick is firmly set into the inlet tube. Allow the glue gun to warm up for approximately 5 minutes. Squeeze trigger until glue flows from nozzle. Glue need not be spread. Use of clamps or other holding devices is not necessary. Unplug the glue gun when finished. No clean up required. Never pull the glue stick out of the back of the glue gun. Note : Hot melt glue gets hot! Nozzle area temperature reaches 380 degrees F. If accidental contact should occur, do not try to remove glue. Put in cold water immediately. Glue guns can be good hand tools for your diy projects like UNO DIY Line Follower Kit compatible with Arduino , 2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis , DIY 2WD Mini Round Robot Car , DIY 2WD Smart Chassis Car Kit and 4WD Four Wheel Drive Kit - A Smart Robot Car with Chassis etc,. Also check our glue gun collection, features a variety of glue guns and adhesives, including hot glue guns and glue gun sticks. Applications: DIY Electronic Project To quick fix in the house To repair broken toys In decoration To repair Window Screen Holes To reattach a Tank Float After Its Mount Has Corroded Away Car Tail Light Covers That Have Broken To reattach car trim To replace a Car's Side View Mirror

40x1 Female Berg Strip This is a 40x1 Pin Berg strip female connector that has the industry-standard spacing of 2.54mm and is designed for soldering directly into printed circuit boards (PCB) . They are supplied Best for the extension of pins of Microcontrollers and ICs. This 40x1 Berg Strip Female Connector is used with custom PCBs or general custom headers. This berg strip female connector can be cut into the desired section and this is an ideal connector for the PCB board and integrated circuit used widely in the computer and breadboard . It has a pitch (distance between two pins) of 2.54 . This Berg strip connector with 2.54mm pitch is an accessory that can be used with any of our LCD , OLED , or VFD modules, as well as any PCB requiring pin headers. Key Features: Standard 2.54mm pitch, Solderable to PCBs, Customizable length, Versatile usage, Wide compatibility, Durable construction, Easy installation. Applications: Used to connect the PCB prototype and the breadboard The docking of the small board and the breadboard As a through stacking head on the PCB How to cut (break) 2.54mm female pin headers to custom size

40x1 Male Berg Strip (90 Degree) This is a 40x1 Pin male berg strip right angle Male, which has the industry-standard spacing of 2.54mm and is designed for soldering directly into printed circuit boards (PCB). They are supplied Best for the extension of pins of Microcontrollers and ICs. This  40x1 pin berg strip right angle Male is used with custom PCBs or general custom headers. This berg strip connector can be cut into the desired sections. This 40x1 Right angle male connector is an ideal connector for the PCB board and integrated circuit and it is used widely in the computer and breadboard. It has a pitch (distance between two pins) of 2.54. This 40x1pin berg strip Right angle male connector with 2.54mm pitch is an accessory that can be used with any of our LCD , OLED , or VFD modules, as well as any PCB requiring pin headers. The size of the header pins should correspond to the same of the header holes, otherwise, the connection is not tight enough and easy to loosen. It can be cut according to different needle number requirements to achieve the actual number of needles used. Choose the header according to the required number of pins and the pin spacing, and insert it directly into the breadboard to connect or form a connector with the header to achieve the purpose of connection. Key Features: 2.54mm pitch right-angle male connector for PCBs. Ideal for extending microcontroller and IC pins. Compatible with LCD, OLED, or VFD modules. Secure connection with matching header pin sizes. Versatile applications including PCB prototypes and breadboards. Easy through-hole mounting. Durable plastic construction for DC power up to 3A. Applications: Used to connect the PCB prototype and the breadboard The docking of the small board and the breadboard As a through stacking head on the PCB

40x1 Pin 2.54mm Pitch Male Berg Strip This is a 40x1 Pin Male berg strip connector which has the industry-standard spacing of 2.54mm and is designed for soldering directly into printed circuit boards (PCB) . They are supplied Best for the extension of pins of Microcontrollers and ICs. This 40x1 Pin Male berg strip Connector is used with custom PCBs or general custom headers. This connector can be cut into the desired section and this is an ideal connector for the PCB board and integrated circuit used widely in the computer and breadboard . It has a pitch (distance between two pins) of 2.54. This Male berg strip connector with 2.54mm pitch is an accessory that can be used with any of our LCD , OLED , or VFD modules, as well as any PCB requiring pin headers. Applications: Used to connect the PCB prototype and the breadboard The docking of the small board and the breadboard As a through stacking head on the PCB Pin Headers - soldering, cutting, male, female, etc.

40x1 Pin 2.54mm Single Row Straight Male Pin Header Strip (Pack of 50) This Single Row 40 Pin Berg Strip Pack of 50. The 50 Quantity Headers can be used in multiple DIY electronic applications. This Male Berg Strip bundle has pitch size of 2.54 Millimeters which can be easily used with any Standard Circuit Board like Vero Boards, Breadboards. This 40 Pin Male Break Away Header Pack of 50 has the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB). They are best for extension of pins of Microcontrollers and ICs.

40x1 Pin 2.54mm Straight Female Pin Berg Strip (Pack of 50) This is a 40 Pin single row straight female berg strip 50 Quantity. These 50 Quantity Female header pin comes with universally standard spacing of 2.54 Millimeters. The 40 Pin 2.54mm Pin Headers for PCB boards can be easily used with Arduino Uno, Arduino Shields, Node MCU, and other Circuit boards. High Quality, Gold-Plated Contact, better electrical conductivity and low contact resistance. Generally used in circuit boards and other low-voltage circuits. This pin header is a ideal socket connector for the PCB board and integrated circuit, is used widely in the Vero board and breadboard.

40x2 Female Berg Strip This is a 40x2 Female Berg Strip which has the industry-standard spacing of 2.54mm and is designed for soldering directly into printed circuit boards (PCB) . They are supplied Best for the extension of pins of Microcontrollers and ICs. This 40x2 Berg Strip Female Connector is used with custom PCBs or general custom headers. This 40x2 Female Berg Strip connector can be cut into the desired section and this is an ideal connector for the PCB board and integrated circuit used widely in the computer and breadboard . It has a pitch (distance between two pins) of 2.54 This 40x2 Female Berg Strip with 2.54mm pitch is an accessory that can be used with any of our LCD, OLED , or VFD modules, as well as any PCB requiring pin headers. Applications: Used to connect the PCB prototype and the breadboard The docking of the small board and the breadboard As a through stacking head on the PCB

40x2 Pin 2.54mm Pitch Male Berg Strip This is a 40x2 Pin Male berg strip connector which has the industry-standard spacing of 2.54mm and is designed for soldering directly into printed circuit boards (PCB) . They are supplied Best for the extension of pins of Microcontrollers and ICs . This 40x2 Berg Strip Male Connector is used with custom PCBs or general custom headers. This connector can be cut into the desired section and this is an ideal connector for the PCB board and integrated circuit used widely in the computer and breadboard . It has a pitch (distance between two pins) of 2.54 This 40x2 Berg Strip Male Connector with 2.54mm pitch is an accessory that can be used with any of our LCD , OLED , or VFD modules, as well as any PCB requiring pin headers. Applications: Used to connect the PCB prototype and the breadboard The docking of the small board and the breadboard As a through stacking head on the PCB