Data Logger Shield The Data Logging Shield of "Deek-Robot" is supplied with an RTC (DS1307) and thus has an extra compartment for a button cell. The SD Card Slot is designed for Micro SD Card. Onboard 3.3V regulator is both a reliable reference voltage and also reliably works SD cards that require a lot of power to run.

Decimilia Duemilanove Board The Decimilia Duemilanove Board compatible with Arduino based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. Decimilia Duemilanove Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Due AT91SAM3X8E ARM Cortex-M3 The Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. The Due Arduino AT91SAM3X8E ARM Cortex-M3 Board is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Key Features: The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The SAM3X has 512KB (2 blocks of 256KB) of flash memory for storing code. The bootloader is pre-burned in a factory from Atmel and is stored in a dedicated ROM memory. The available SRAM is 96KB in two contiguous banks of 64KB and 32KB. All the available memory (Flash, RAM, and ROM) can be accessed directly as a flat addressing space. It is possible to erase the Flash memory of the SAM3X with the onboard erase button. This will remove the currently loaded sketch from the MCU. To erase, press and hold the Erase button for a few seconds while the board is powered. Due follows the 1.0 pinout: TWI: SDA and SCL pins that are near to the AREF pin. The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V. An unconnected pin, reserved for future use Note: Unlike other Arduino boards, the Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board.

Arduino Due Board Original A000062 Introducing the Arduino Due Original, the groundbreaking microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. This board is the first Arduino with a 32-bit ARM core microcontroller, unlocking a new level of performance and capabilities for your projects. Featuring 54 digital input/output pins, including 12 PWM outputs, and 12 analog inputs, the Arduino Due Original provides exceptional flexibility for connecting various sensors, actuators, and components. With its powerful 32-bit core, you can perform operations on 4 bytes of data within a single CPU clock, enabling rapid and efficient execution of complex tasks. The Arduino Due Original comes equipped with 96KBytes of SRAM and 512KBytes of flash memory, allowing you to store and run your code with ease. Additionally, it features a DMA (Direct Memory Access) controller that offloads memory-intensive tasks from the CPU, optimizing overall performance. Pinout Of Arduino Due Original The Arduino Due board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino Due online from the comfort of your home. Look out our various collections of Original Arduino Boards. Versatile Applications: Whether you're a hobbyist, a professional developer, or an educational institution, the Arduino Due Original caters to a wide range of applications. From building interactive art installations to crafting complex automation systems, this board is a versatile solution that adapts to your specific needs. Its broad compatibility with various shields and sensors makes it ideal for prototyping, testing, and bringing your ideas to life. Abundant Connectivity: The Arduino Due Original comes equipped with an impressive array of connectivity options. With its extensive I/O pins, including digital and analog inputs and outputs, you have the freedom to connect and interface with a multitude of external devices. The USB port enables easy communication with your computer, while the Ethernet connectivity allows for network integration. Additionally, the SD card slot provides expanded storage capabilities for data logging and file management. Reliable Development: As the original best Arduino board, the Arduino Due Original offers the utmost reliability and stability. It provides a consistent development environment that ensures seamless integration with the Arduino software ecosystem. The extensive community support, vast libraries, and countless online resources empower you to find solutions, troubleshoot issues, and share knowledge with fellow enthusiasts. With the Arduino Due Original, you can focus on what truly matters—your project. Competitive Pricing: We understand the importance of affordability without compromising on quality. That's why the Arduino Due Original offers exceptional value at a competitive price point. You get a feature-rich development board with unparalleled performance at a cost that won't break the bank. Whether you're a student, an entrepreneur, or a professional, this board is a wise investment for your creative endeavours. Join a Thriving Community: By choosing the Arduino Due Original, you become part of a vibrant community of creators, innovators, and learners. Share your projects, seek inspiration, and collaborate with like-minded individuals from around the world. The Arduino community is a treasure trove of knowledge and support, enabling you to grow and expand your skills as you embark on your development journey. Order Your Arduino Due Original Today: Don't miss out on the opportunity to take your projects to new heights. Embrace the power, versatility, and reliability of the Arduino Due Original. Place your order today and unlock a world of endless possibilities in electronics, programming, and beyond. Remember, the Arduino Due Original is just one of many remarkable development boards available. Explore our extensive collection of Arduino boards to find the perfect board that suits your specific needs. Together, let's shape the future of innovation! Also, read our blog on the best Arduino board explaining the different types of Arduino boards and how to select the right Arduino board for your needs. Features of Arduino Due Original Model Type Arduino Due Microcontroller Chip AT91SAM3X8E Input Voltage (limit) 6-16V Input Voltage(Recommended) 7-12V Analog I/O Pins 12 Digital I/O Pins 54 (of which 12 provide PWM output) Analog Output Pins 2 (DAC) Clock Speed 84 MHz Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) DC Current for 3.3V Pin 800 mA DC Current per I/O Pin 130 mA On-Board LEDs Yes Operating Temperature (°C) -20 to 80 Weight (gm) 36 Length (mm) 102 Width (mm) 54 Height (mm) 25 Shipment Weight 0.12 kg Shipment Dimensions 12 × 6 × 3 cm

Arduino Education Starter Kit The Arduino Education Starter Kit offers a comprehensive package of hardware and software necessary for eight students, grouped in pairs. It encompasses step-by-step lessons, teacher notes, exercises, and an array of additional optional resources such as activities, concepts, history, and intriguing facts to enhance the overall classroom experience. Within the online platform, educators can access the teacher content, which includes nine 90-minute lessons and two open-ended group projects. These lessons effectively teach coding and electronics to students. Moreover, each lesson builds upon the previous one, allowing students to apply and reinforce their acquired skills and concepts. As students progress through the lessons, they are encouraged to maintain an engineering logbook to document their journey. To facilitate effective teaching, each lesson commences with an overview, estimated completion times, and clearly defined learning objectives. Throughout the lessons, teacher notes and additional information are provided to ensure a seamless delivery. Additionally, extension ideas are presented at the conclusion of each lesson, encouraging further exploration and learning opportunities. Features Comprehensive Package: The kit includes all the necessary hardware and software required for teaching coding and electronics to eight students, organized in pairs. Step-by-Step Lessons: The kit provides a series of well-structured, step-by-step lessons that guide students through the learning process. Teacher Notes: The kit includes detailed teacher notes to assist educators in delivering the lessons effectively and efficiently. Exercises: Students are provided with exercises that reinforce the concepts taught in each lesson, allowing them to apply their knowledge and skills. Additional Resources: The kit offers extra optional resources such as activities, concepts, history, and interesting facts to enrich the classroom experience and expand students' understanding. Online Platform: The kit comes with an online platform that provides access to teacher content, including nine 90-minute lessons and two open-ended group projects. Progressive Learning : Each lesson builds upon the previous one, ensuring a progressive learning experience for students. Engineering Logbook: Students are provided with an engineering logbook to document their progress and track their learning journey. Clear Lesson Structure: Each lesson begins with an overview, estimated completion times, and learning objectives, enabling both teachers and students to stay on track. Teacher Support: Throughout the lessons, teacher notes and information are available to support educators in delivering the content effectively. Extension Ideas: At the end of each lesson, extension ideas are provided to encourage further exploration and allow students to delve deeper into the subject matter. Learning Outcomes Understand the fundamentals of electronics and coding using real-world applications. Develop problem-solving and logical thinking skills through interactive projects. Gain hands-on experience with sensors, LEDs, motors, and circuits. Build teamwork and collaboration skills through group activities. Applications Ideal for classroom STEM education and robotics clubs. Suitable for beginner electronics workshops or coding bootcamps. Can be used to create basic automated projects like light sensors, alarms, and motor-based systems.

Arduino Ek Innovation Kit The Arduino Ek Innovation Kit is complete electronics and IoT starter pack designed for students, hobbyists, and innovators to bring their creative ideas to life. Powered by the Official Arduino UNO EK R4 WiFi, this kit includes a wide range of sensors, actuators, and modules such as the DHT11 temperature & humidity sensor, HC-SR04 ultrasonic sensor, PIR motion sensor, IR proximity sensor, ADXL345 accelerometer, SG90 servo motor, and more. With additional essentials like a breadboard, jumper wires, LEDs, switches, keypad, and resistors, this kit provides everything you need to explore robotics, home automation, AIoT projects, and hands-on STEM learning. Whether you are a beginner experimenting with basic circuits or an advanced maker working on innovative prototypes, the Arduino Ek Innovation Kit is the perfect companion for your journey from concept to creation. What You Will Learn from this Kit? How to program and control the Official Arduino UNO R4 WiFi Interfacing and working with sensors (temperature, humidity, motion, ultrasonic, light, proximity, accelerometer) Building automation projects using relays, buzzers, and LEDs Controlling actuators like servo motors for robotics applications Designing IoT-based projects with WiFi-enabled Arduino Basics of circuit prototyping using breadboards, jumper wires, resistors, and switches Hands-on experience in STEM concepts including electronics, coding, and real-world problem solving

Arduino EK Wifi Starter Kit The Arduino UNO EK R4 WiFi Starter Kit is a versatile beginner-friendly package crafted for electronics prototyping, IoT and embedded applications. At its core is the UNO EK R4 board, which combines a 32-bit Renesas R7FA4M1AB3CFM microcontroller with an ESP32-S3 module for Wi-Fi and Bluetooth connectivity, alongside a 12×8 programmable LED matrix. It boasts 256 kB flash, 32 kB SRAM, 8 kB EEPROM, a 14-bit ADC, DAC channels and CAN bus interface. Code uploads in seconds over USB-C, while onboard regulators accept 6–24 V inputs. The kit includes a 400-tie-point solderless breadboard, 220 ? resistor, active buzzer, DHT11 humidity/temperature sensor, male jumper wires and five 5 mm LEDs (red, green, blue, white and yellow). These components let you build weather stations, alarm buzzers and interactive displays. Compatible with the Arduino IDE and C/C++ libraries, it’s ideal for students, makers and educators seeking hands-on learning and rapid prototyping. Explore systems, connect cloud services via Wi-Fi and bring electronic ideas to life with this toolkit. Arduino EK Wifi Starter Kit Contains: Original Arduino UNO EK R4 WiFi The board merges a Renesas R7FA4M1AB3CFM (Cortex-M4F) MCU with an ESP32-S3 module for Wi-Fi and Bluetooth. It features a 12×8 RGB LED matrix, 256 kB flash memory, 32 kB SRAM, 8 kB EEPROM and standard digital/analog headers. 220-ohm Resistor A ¼ W carbon-film resistor with 220 ? resistance and ±5% tolerance, perfect for limiting current to LEDs, sensors or buzzers. Axial leads fit snugly into solderless breadboards for quick circuit prototyping and testing. Type-C USB Cable (1 m) Durable 1 m USB-C to USB-A cable delivers 5 V/3 A power and high-speed data transfer. Nylon-braided jacket resists kinks and wear, ensuring reliable connection between your computer and Arduino board. Active Buzzer Module (3.3–5 V) Compact piezo buzzer with built-in driver, operating from 3.3 V to 5 V logic levels. Mountable PCB module includes transistor switch and resistor, enabling direct GPIO control for alarms, tones and notifications. 400-Tie-Point Solderless Breadboard Reusable prototyping board offering 400 tie points in a 0.1? pitch layout with continuous power rails. No-solder design allows rapid insertion of ICs, resistors, LEDs and jumper wires for flexible circuit assembly. DHT11 Humidity & Temperature Sensor Module Digital sensor module measuring 20–90% RH humidity (±5% accuracy) and 0–50 °C temperature (±2 °C accuracy). Uses a single-wire communication protocol and includes pull-up resistor and header pins for breadboard use. Male-to-Male Jumper Wires Set of 20 Dupont cables, each 20 cm long with 0.1? pitch male connectors. Flexible silicone insulation rated for 300 V/3 A makes them ideal for reliable connections on breadboards, sensors and modules. 5 mm LEDs (Green, Red, Blue, White, Yellow) Pack of five diffused-lens LEDs (5 mm diameter) with forward voltages of 2.0–3.3 V and 20 mA operating current. Long-lead anode and short-lead cathode simplify orientation in prototype circuits. List of Projects that can be with the Arduino EK Wifi Starter Kit WiFi Weather Monitor Smart Temperature Alert System Local Temperature Display WiFi LED Controller (IoT) Temperature-Triggered Alarm IoT Humidity Logger LED Blinker with Web Control Visual Environment Indicator

Ethernet W5100 Shield for Arduino The Arduino Ethernet Shield enables an Arduino board to connect to the internet using the Wiznet W5100 ethernet chip. This chip provides a network (IP) stack that supports both TCP and UDP protocols. The Ethernet W5100 Shield Network Expansion Board, which comes with a micro SD card slot, supports up to four socket connections at once. To connect to the internet using the Arduino shield , utilize the Ethernet library to write sketches. The shield connects to an Arduino board using long wire-wrap headers that pass through the shield. This keeps the pin layout intact and allows for stacking of another shield on top. The most recent revision of the board exposes the 1.0 pinout on the Arduino UNO board's rev 3. This Ethernet Shield facilitates a quick connection of the UNO R3 board to the internet. To get started, plug the module onto the Arduino board , connect it to the network using an RJ45 cable (not included), and follow a few simple instructions to control your world through the internet. Additionally, it allows the connection of your Arduino UNO 328 or MEGA 2650 1280 to a network or the internet while storing or retrieving files on a Micro SD Card. The Ethernet Shield features a standard RJ-45 connection with an integrated line transformer and Power over Ethernet enabled. It also has an onboard micro-SD card slot, which stores files that are accessible over the network. The shield is compatible with Uno and Mega boards, utilizing the Ethernet library. The onboard microSD card reader is accessible via the SD Library, with SS located on Pin 4 when working with this library. Note that the original revision of the shield had a full-size SD card slot that is no longer supported. Lastly, the shield includes a reset controller, ensuring that the W5100 Ethernet module properly resets upon power-up. In previous revisions of the shield, compatibility with the Mega board required a manual reset after power-up. Also check out our ethernet cable , which is ideal for connecting devices like PCs, laptops, routers, modems, and switches to your network. SD Card The latest revision of the Ethernet Shield includes a micro-SD card slot, which can be interfaced with using the SD library . Features: Ethernet Controller: Equipped with a W5500 Ethernet controller chip for reliable network communication1. RJ45 Connector: Connects to the network using a standard RJ45 Ethernet cable. Micro SD Card Slot: Built-in micro SD card slot for data logging and storage. Compatibility: Compatible with Arduino Uno and Mega boards. Power Over Ethernet (PoE): Supports PoE with an additional module, allowing the shield to be powered through the Ethernet cable. Network Protocols: Supports various network protocols including TCP, UDP, and ICMP. Auto-Negotiation: Supports auto-negotiation for both half and full duplex operation. Memory Buffer: Includes 16KB of memory for buffering, receiving, and transmitting messages Applications: Web Servers: Create web servers to serve sensor data or webpages for remote monitoring. Data Logging: Log data from sensors to a remote server or an SD card for later analysis. Remote Control: Control devices remotely over the internet or a local network. IoT Projects: Integrate with Internet of Things (IoT) systems to send and receive data. Home Automation: Automate home devices and systems with network connectivity. Networked Sensor Nodes: Connect sensor nodes as Ethernet clients to send readings to a central server. Browser-Based Controls: Receive commands and configurations from browser-based controls over the LAN

Arduino Explore IOT Kit Rev2 AKX00044 The Arduino Explore IoT Kit Rev2 is a great tool for high school and college students who want to learn about creating connected devices, or IoT. It helps them quickly get started with easy activities and work on 10 hands-on projects focused on important issues like sustainability. These projects let students solve real-world problems related to the UN’s Sustainable Development Goals, such as improving urban farming, health monitoring, and managing water and waste. They’ll use design thinking to come up with their own solutions. This kit not only teaches technology but also helps students understand and address important challenges, preparing them to make a positive impact on the world. Learning Outcomes: Gain a solid understanding of how Internet-connected devices work and communicate. Explore and solve global sustainability challenges related to the UN’s Sustainable Development Goals. Learn to manage and analyze data using real-world sensors. Develop skills in computational thinking through data handling and device control. Use the Cloud to remotely control actuators like LEDs, buzzers, and displays based on sensor data.

Arduino Innovation Kit for Innovative Engineering This Arduino Innovation Kit is useful for hobbyists to test and prototype their electrical projects. Engineering students can buy this Innovation Kit online to develop and build their final projects. This kit is validated on Arduino but other microcontrollers can be used as well. This Innovation kit contains all the necessary electronic components to get started with Arduino and embedded systems. All the components included in the kit are of good quality and are compatible with Arduino.