NodeMCU ESP8266 (AMICA-CP2102 driver) (Pack of 25)

NodeMCU ESP8266 (AMICA-CP2102 driver) (Pack of 25)

(0)

As low as ₹6057.12 ₹7571.40 Incl. GST (No Hidden Charges)

OUT OF STOCK

For bulk orders or wholesale inquiries, please contact us at iotcart.help@gmail.com or call/message us at +918050206487.

Add To Cart

NodeMCU ESP8266 (AMICA-CP2102 driver) The Amica Node MCU development board is based on ESP8266 and is integrated with an onboard CP2102 USB-TTL converter. The Node MCU is an open-source firmware and development platform that helps you to prototype your IOT projects and bring them to life. The Amica Node MCU board is equipped with an onboard voltage regulator and 10 GPIO pins which help you power up your development board in the fastest way possible. The board is based on the highly popular ESP8266 WiFi Module chip with the ESP-12 SMD footprint. This WiFi development board already embeds in its board all the necessary components for the ESP8266 (ESP-12E) to program and upload code. It has a built-in USB to serial chip upload codes, a 3.3V regulator, and a logic-level converter circuit so you can immediately upload codes and connect your circuits. This board contains the ESP-12E chip with a 4MB flash memory so no worries about your long project codes! The ESP8266 NodeMCU with cp2102 development board - a true plug-and-play solution for inexpensive projects using WiFi. The module arrives pre-flashed with NodeMCU firmware so just install your USB driver. The NodeMCU is an open-source project and you can find all the design files and so on from their GitHub page. This microcontroller board can easily be programmed using the Arduino IDE programming software. Explore the wide range of ESP Modules & Development Board Pinouts: Pin Diagram of AMICA Node MCU ESP8266 Comparison: Specification Amica NodeMCU Lolin NodeMCU NodeMCU Wroom32 Microcontroller ESP-8266 32-bit ESP-8266 32-bit ESP-WROOM-32 processor Xtensa single core 32 bit L106 Xtensa single core 32 bit L106 Tensillica Xtensa LX6 microprocessor with 2 cores NodeMCU Size 49mm x 26mm 58mm x 32mm 49mm x 25 mm Pin Spacing 0.9" (22.86mm) 1.1" (27.94mm) 0.9" (22.86mm) Clock Speed 80 MHz 80 MHz 160 MHz USB to Serial CP2102 CH340G CP2102 USB Connector Micro USB Micro USB Micro USB Operating Voltage 2.5 V to 3.6 V 2.5 V to 3.6 V 2.5 V to 3.6 V Input Voltage 4.5V-10V 4.5V-10V 4.5V-15V Flash Memory 4 MB 4 MB 4MB SRAM 64KB 64KB 520KB ROM - - 448KB Digital I/O Pins 11 11 16 Analog In Pins 1 1 16 ADC Range 0-3.3V 0-3.3V 0-3.3V UART 1 1 2 SPI 1 1 1 I2C 1 1 1 CAN - - 2 WiFi Built-In 802.11 b/g/n 802.11 b/g/n 802.11 b/g/n Bluetooth Built-in - - Bluetooth 4.2 Inbuilt sensor No inbuilt sensor No inbuilt sensor Inbuilt hall sensor, temperature sensor Applications: With AMICA Node MCU we can Control Devices Using a Phone and NodeMCU like your appliances using Android Phone over WiFi. Few generic applications would be in Internet Smoked Alarm VR Tracker Octopod Serial Port Monitor ESP Lamp Incubator Controller IoT home automation Security Alarms Don’t forget to check out our latest blog on Node MCU. Click Here Package Includes: 25 x NodeMCU ESP8266 (AMICA-CP2102 driver) Specifications: Serial/USB Chip CP2102 Operating Voltage 3.3V Output Power(dBm) 19.5 @802.11b Mode Flash Memory(Mb) 4 Support SDIO 1.1/2.0, SPI, UART Dimensions (mm) 49 x 24 x 13 Weight (gm) 8

This is NodeMCU ESP8266 (AMICA-CP2102 driver) (Pack of 25)
The AMICA NodeMCU ESP8266 Module has an operating voltage of 3.3V
AMICA NodeMCU is a great WiFi chip, that can be used in several wireless applications.
Interactive and programmable, Arduino-like hardware io
Micro USB slot on the board can be directly connected to the computer or other USB host devices
It is an ideal solution for adding internet connectivity to any embedded project
It has got CP2102 USB to serial converter making it easy to use
It is generally programmed using the lua language
25 x NodeMCU ESP8266 (AMICA-CP2102 driver)

Serial/USB Chip CP2102
Operating Voltage 3.3V
Output Power(dBm) 19.5 @802.11b Mode
Flash Memory(Mb) 4
Support SDIO 1.1/2.0
Dimensions (mm) 49 x 24 x 13
Weight (gm) 8

To rate this product please login!

Related products

20%

Witty Fox - ESP32 Storm Board…

(0)

Witty Fox - ESP32 Storm Board The Witty Fox ESP32 Storm board is an easy-to-use prototyping board developed specially keeping IoT Applications in mind. It allows users to upload their program wirelessly (OTA) by default or connect to the laptop using Witty Fox ESP Programmer. Mostly all usable GPIO breakouts of ESP32 are neatly organized with power pins to aid the user in quick prototyping. It also has multiple breakouts for both SPI and I2C interfaces, as well as a dedicated breakout for the PIR sensor. If want you can make NFC based security door lock and for that you will need a few essential components like: Witty Fox NFC board 12V Solenoid lock 5V relay module Jumper Wires 5V micro USB Power adapter 12V Power adapter The in-built battery charging and protection board can be easily replaced by the user in case of any damage to the product caused during prototyping. It features a low dropout on-board linear regulator by Microchip Technology[TM] for operation with Li-Ion batteries. The board comes along with a 1000mAh Lithium-ion battery. read more : Advantages of Development Boards Video Tutorial of Witty Fox - ESP32 Storm Board: Over The Air (OTA) | Wirelessly Program Witty Fox ESP32 Storm Board using Arduino IDE Package Includes: 1 x Witty Fox ESP Storm Board 1 x In-Built Li-ion Battery Pack Specifications: Brand Witty Fox Model ESP Storm Board Dimensions 12.7 x 9.91 x 5.08 cm Weight 100grams Style Storm Board with battery

₹773.11 ₹966.40 Incl. GST

20%

Airgain N2420 2.4 Ghz 4DB WiF…

(0)

Airgain N2420 2.4 Ghz 4DB WiFi Omnidirectional Antenna 2.4GHz built-in PCB antenna N2420, is our company's well-designed dipole PCB antenna, the gain is up to 3.5dBi (+/-0.5), the effect is comparable to the external rod-shaped omnidirectional antenna. The wire uses a low-loss high-frequency coaxial communication cable. Wi-Fi omnidirectional antenna is an antenna that sends and receives signals in all directions. These antennas have different gain levels, frequency ranges, and coverage distances which can be helpful for wifi development boards like arduino, nodemcu, etc. Package Includes: 2 x Set of Airgain N2420 2.4 Ghz 4DB WiFi Omnidirectional Antenna Specifications Model N2420 Impedance 50 ohm Frequency range 2400-2500 MHz Gain 3.5 +- 0.5dBi Dimensions 47 X 7.3 X 0.5 (mm) Weight 15 grams

₹65.22 ₹81.53 Incl. GST

20%

ESP32 Wroom Programming Jig

(0)

ESP32 Wroom Programming Jig This module is suitable for testing or burning firmware to the ESP WROOM 32 chips. All IO ports have LEDs which enables this module to act as a minimum system board to test all GPIO pins. It does support a one-click firmware download function. It has a power indicator light, burning indicator light, and, serial port communication indicator light. IT lead-out all IO ports, which can be used as the smallest system development board or a fixture for small-batch programming Check out our entire range of IoT & Wireless Devices ESP32 Wroom Programming Jig Pinout: Pinout of ESP32 Wroom Programming Jig Application: Burning Fixture Tool Package Includes: 1 x ESP32 Wroom Programming Jig Specifications: Type Voltage Regulator Application Burning Fixture Tool Dimensions 5 x 4 x 3cms Weight 25 grams

₹511.34 ₹639.18 Incl. GST

20%

ESP32 LoRa with Display - 863…

(0)

ESP32 LoRa with Display ESP32 LoRa with Display - 863MHz-928MHz SX1276 is a development board for IoT projects that includes an ESP32 microprocessor, a SX1276 LoRa node chip, and a 0.96-inch OLED display.ESP32 LoRa with Display operates on frequencies between 863MHz and 928MHz and is designed for wireless communication projects. The board has a high sensitivity of about -148dBm and a power output of +20 dBm. It also includes a lithium battery charging circuit and a CP2102 USB to serial chip. The board can be used for LoRaWAN wireless communication development and other IoT projects. Pinout: Pinout Of ESP32 LoRa with Display

₹1607.99 ₹2009.98 Incl. GST

20%

Lolin Node MCU base

(0)

Lolin Node MCU base The NodeMcu Lua WIFI Development Board ESP8266 Serial Port Baseboard is a networking platform that is open source. It is programmed in the Lua scripting language. This baseboard is the Breakout Board for our NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Allows developers to interact with the underlying hardware in the same way that Arduino does. In order for software developers to easily operate hardware devices. The perfect solution for breaking out the pins from Lua V3 Nodemcu. Pinout: Pinout Of ESP8266 NodeMcu Lua WIFI Development Board Baseboard Key

₹92.18 ₹115.23 Incl. GST

20%

ESP32-C6-DevKitM-1 Developmen…

(0)

ESP32-C6-DevKitM-1 Development Board (4 MB SPI Flash) Transform your IoT projects with the ESP32-C6-DevKitM-1 Development Board. This entry-level board is powered by the ESP32-C6-MINI-1(U) module, offering Wi-Fi 6, Bluetooth LE, Zigbee, and Thread functionalities. Crafted for smart homes, industrial automation, and beyond, it ensures versatility with 4 MB or 8 MB SPI Flash options. The RISC-V 32-bit single-core CPU, along with the low-power co-processor, guarantees efficient performance and energy savings. With user-friendly features like pin headers, USB Type-C port, and on-board USB-to-UART bridge, this board is perfect for various IoT applications. Pin Diagram: Key

₹1321.00 ₹1651.24 Incl. GST

20%

Beetle ESP32 - C3 (RISC-V Cor…

(0)

Beetle ESP32 - C3 (RISC-V Core Development Board) Beetle ESP32-C3, a compact IoT solution ideal for wearables, sports projects, and more. With mini size, safety features, dual-mode communication, and comprehensive tutorials, this controller ensures seamless integration into diverse applications. Made for IoT enthusiasts, it measures 25*20.5 mm, supporting WiFi and Bluetooth for versatile connectivity. The integrated li-ion battery management adds safety, making it perfect for wearables and IoT systems. Program it with Arduino IDE, ESP-IDF, MicroPython, C, or Python, and explore endless possibilities with detailed tutorials.

₹725.29 ₹906.61 Incl. GST

20%

ESP32 CP2104 Wireless Develop…

(0)

ESP32 CP2104 Wireless Development Board D1 LOLIN32 The D1 LOLIN32 ESP32 CP2104 Wireless Development Board is a small yet powerful device that improves the adaptability and effectiveness of your Internet of Things projects. Based on the reliable ESP-32 chip, this board has 4MB of flash memory, built-in WiFi, and Bluetooth, providing you with all the connections you require straight out of the box. The integrated lithium battery interface of the LoLin32 is one of its most notable features. A LiPo battery can be connected directly and charged on the board, with a 500mA maximum charge current. Now, you’ll notice this board has a streamlined design. The manufacturer removes a few pins to make it lighter, but don’t worry—you still have access to all 21 I/O pins. The number of GND and 3V3 pins is reduced, but you’ll still have everything you need for most projects. The JST connector for the battery is strategically placed next to the USB port, which is your go-to for programming (whether you’re using Arduino, Lua, or MicroPython) and charging. The status LED and reset button have been thoughtfully relocated between the USB and battery connectors. This board is engineered for those who need reliability, power, and convenience in one compact package. Package Includes: 1 x ESP32 Development Board - LOLIN Specifications: Specification Details Bluetooth Yes Flash Memory 4MB Lithium Battery Interface 500mA maximum charging current Microcontroller ESP-32 Operating Voltage 3.3V Digital I/O 26 Pins Analog I/O 12 Pins Clock Speed 240MHz PCB Size 58×25mm Weight 8gm

₹403.51 ₹504.39 Incl. GST

20%

ESP8266 Serial WIFI Wireless …

(0)

ESP8266 Serial WIFI Wireless Transceiver Module ESP-07 Send Receive LWIP AP Plus STA The ESP-07 WiFi module is developed by AI-Thinker Co., Ltd, has an ultra-low power 32-bit MCU micro, with a 16-bit short mode, clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi-Fi MAC/BB/RF/PA/LNA, on-board antennas. The ESP ESP8266EX offers a complete and self-contained Wi-Fi networking solution; it can be used to host the application or to offload Wi-Fi networking functions from another application processor. When ESP8266EX hosts the application, it boots up directly from an external flash. It has an integrated cache to improve the performance of the system in such applications.This module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts. Pinout: Pinout of ESP8266 ESP-07 Wifi Module

₹180.02 ₹225.03 Incl. GST

20%

ESP32 (38 Pin) WiFi + Bluetoo…

(0)

ESP32 (38 Pin) WiFi + Bluetooth NodeMCU-32 Development Board The ESP32 development board promises to revolutionize the Internet of Things (IoT), creating a powerful and reliable platform for low-cost, highly integrated applications. Featuring an open-source operating system, built-in Wi-Fi, and Bluetooth support, along with two high-speed processors - one dedicated to communication tasks such as packet processing while another handles application code execution. Its expanded capability includes a USB 2.0 OTG controller. This means faster data exchange between external peripherals when connected directly or via hubs/adapters over AC powerline networks. It also supports various industry standard formats including the JTAG debug interface so you can optimize your coding designs without worrying about compatibility issues. Additionally, it comes preloaded with advanced features like PWM outputs & multiple ADCs which makes this perfect for any IoT project that looks at making life easier by automating device operations through remote control services from anywhere in the world within seconds!! So are you ready to supercharge your IoT, home automation, and robotics projects? Look no further than the Iotcart ESP32 38 Pin Development Board. This versatile board is equipped with integrated WiFi and Bluetooth, ensuring seamless connectivity with other devices, all at your fingertips. Featuring an impressive 38 pins, including analog and power pins, it offers a broad spectrum of input and output options, empowering you to bring your innovative ideas to life. Thanks to its Arduino compatibility, programming becomes a breeze, making it suitable for both beginners and experienced developers. What sets this board apart is its sensor compatibility. It harmoniously works with a variety of sensors and actuators, allowing you to explore an array of project possibilities. Crafted with the latest ESP-WROOM-32 module, this board guarantees robust performance and unwavering reliability. But that's not all. The Iotcart ESP32 38-Pin Development Board is here to simplify your development journey. Whether you're embarking on your first project or you're a seasoned developer, this board is designed with you in mind. It's your key to unlocking the world of IoT, home automation, and robotics. Price: Buy the Iotcart ESP32 38 Pin Development Board at the best price, right here at Iotcart. read more: ALL YOU NEED TO KNOW ABOUT ESP32 Key

₹312.20 ₹390.25 Incl. GST

20%

ELECROW EasyESP-1: Rapid Prot…

(0)

ELECROW EasyESP-1: Rapid Prototyping WiFi ESP8266 Experimenter Board - Easy Programming, GPIO Access, Breadboard ELECROW EasyESP-1 is the perfect solution for beginners diving into IoT and electronics projects. It is equipped with features like easy programming, GPIO access, breadboard experimentation, and more. Made in accordance with ELECROW's quality standards, EasyESP-1 ensures durability and performance. Its ESP-12E module provides seamless connectivity and guarantees reliable performance. The included breadboard allows users to experiment with external circuits, fostering creativity and innovation. EasyESP-1 is designed to be user-friendly, making it suitable for DIY enthusiasts, students, and hobbyists alike. With its versatile compatibility and ease of use, EasyESP-1 opens up a world of possibilities for electronic projects.

₹3302.93 ₹4128.65 Incl. GST

20%

ESP32 Node MCU Development Bo…

(0)

ESP32 (CP2102 Driver, 30 Pin) WiFi + Bluetooth NodeMCU-32 Development Board) Looking to supercharge your IoT projects? The ESP32 Node MCU Development Board with Wi-Fi and Bluetooth (CP2102) is your go-to solution. And the best part? You can buy it now at an unbeatable price on Iotcart! This NodeMCU ESP32 development board is a powerhouse of power and connectivity. With robust Wi-Fi and Bluetooth capabilities, it opens up a world of possibilities. Its compact 30-pin design allows it to seamlessly integrate into various products, enabling endless creative options. What sets this board apart are its dual wireless modes. You can choose between AP, STA, or AP+STA modes, giving you the flexibility you need for your IoT endeavors. The inclusion of Lua programming support makes development a breeze, catering to both beginners and experts. For smooth computer connectivity, the board features a CP2102 USB-UART bridge, ensuring that you can work effortlessly with your computer. At the heart of this development board lies the powerful ESP32S chip, designed for scalability and adaptability. It boasts dual CPU cores, adjustable clock frequencies, and a rich set of peripherals, including touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C. Connect to your devices via Bluetooth or Wi-Fi, and enjoy a wide physical range and direct internet connection. With power consumption under 5µA, it's perfect for wearable electronics and battery-powered applications. Take your IoT projects to the next level with this exceptional board. read more : Internet Clock using ESP32 and OLED Display Key

₹329.60 ₹412.00 Incl. GST

20%

WiFi Kit 32

(0)

WiFi Kit 32 WiFi Kit 32 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP32 (include Wi-Fi and BLE), Li-Po battery management system, 0.96″ OLED is also included. It’s the best choice for smart cities, smart farms, smart home, and IoT makers. The internal flash of the ESP32 module is organized in a single flash area with pages of 4096 bytes each. The flash starts at address 0x00000, but many areas are reserved for Esp32 IDF SDK and Zerynth VM. There exist two different layouts based on the presence of BLE support. Note: The device can operate on an external supply of 2.5 to 6 volts. If using more than 6V, the voltage regulator may overheat and damage the device. Pinout: Pinout of WiFi Kit 32 Package Includes: 1 x WiFi Kit 32 Specifications: Operating voltage 3.3V to 7V Operating temperature range -40°C to +90°C. Data Rate 150Mbps @ 11n HT40,72Mbps @ 11n HT20,54Mbps @ 11g, 11Mbps @ 11b Transmission power 19.5 dBm @ 11 b, 16.5 dBm @ 11 g, 15.5 dBm @ 11 n Flash size 32 MegaByte Dimensions 50 x 25.4 x 10.3mm Lithium battery interface 2 pin,1.25mm interface

₹1231.43 ₹1539.29 Incl. GST

20%

ESP01 ESP8266 Wireless Transc…

(0)

ESP01 ESP8266 Wireless Transceiver Module Hey, have you seen the ESP-01 ESP8266 WiFi Module? It’s a simple way to connect any microcontroller to WiFi since it has everything built in. You can run your own programs on it or let it handle the Wi-Fi connection for another device. It’s got its own processing power and GPIO pins, so you can easily connect sensors or other gadgets with hardly any extra parts. Plus, it’s really small and takes up almost no space. To use it, you’ll need a USB to 3.3V TTL converter and a 3.3V power supply—just avoid using 5V devices because this one works on 3.3V. It also comes with features like VoIP support and self-calibrating RF, meaning it works in all conditions without needing any extra RF components. Super easy to get started! Warning: The ESP8266 works at 3.3V. Connecting directly to 5V will burn it! You have to use voltage drivers or logic shifters. Pinout:

₹99.14 ₹123.92 Incl. GST

20%

ESP-12 D1 Mini V2 Board

(0)

ESP-12 D1 Mini V2 Board This is a D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266, it is a mini WIFI board based on ESP-8266EX. 11 digital input/output pins, and all pins have interrupt/PWM/I2C/one-wire supported (except D0) 1 analog input(3.3V max input) and a Micro USB connection. The board is small in size and integrates with the Arduino platform, making it easy to develop WiFi-based projects. The development board features WiFi-SoC ESP8266 and is made for fast Internet-of-Things (IoT) prototyping. It is flashed with the latest firmware version and can be set up and programmed right away with the onboard micro USB connection. With only a few lines of code, the NodeMCU Dev Kit connects to your local network and is ready for control by other network members like computers and smartphones. The d1 mini is an ESP8266 development board that is compact, versatile and very easy to use with the Arduino IDE. Pinout: Applications Wifi network applications Transfer out data/information from other applications without wire Package Includes: 1 x ESP-12 D1 Mini V2 Board Specifications: Max Input Voltage 3.3V Digital Pins 11 Dimensions 3 x 2 x 1cms Weight 5 grams

₹164.36 ₹205.45 Incl. GST

NodeMCU ESP8266 (AMICA-CP2102 driver) (Pack of 25)

To rate this product please login!

Related products

Related products

Witty Fox - ESP32 Storm Board…

Airgain N2420 2.4 Ghz 4DB WiF…

ESP32 Wroom Programming Jig

ESP32 LoRa with Display - 863…

Lolin Node MCU base

ESP32-C6-DevKitM-1 Developmen…

Beetle ESP32 - C3 (RISC-V Cor…

ESP32 CP2104 Wireless Develop…

ESP8266 Serial WIFI Wireless …

ESP32 (38 Pin) WiFi + Bluetoo…

ELECROW EasyESP-1: Rapid Prot…

ESP32 Node MCU Development Bo…

WiFi Kit 32

ESP01 ESP8266 Wireless Transc…

ESP-12 D1 Mini V2 Board

Features

Backgrounds

Full Screen mode

Dark mode

Clear local storage

Contact us

Our Company

Account

Services