DHT22 Humidity and Temperature Sensor The DHT22 Sensor Module is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins are needed). It's fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old. Simply connect the first pin on the left to 3-5v power, the second pin to your data input pin, and the rightmost pin to the ground. Although it uses a single wire to send data it is not Dallas One wire compatible if you want multiple sensors, each one must have its own data pin feature & application: High precision capacitive type full range temperature compensated relative humidity and temperature measurement calibrated digital signal outstanding long-term stability extra components not needed long transmission distance low power consumption 4 pins packaged and fully interchangeable. Read our blog explaining the classification of sensors in IoT detailing 5 core classifications depending on how they work, 10 types of sensors, and the Characteristics of Sensors in IoT. Applications: HVAC Dehumidifiers Testing and inspection equipment Consumer goods Automotive automation Data loggers Weather stations Home appliances Humidity control Medical check out: ASAIR Temperature and Humidity Sensor AM2302 (Original) Package Includes: 1 x DHT22 Temperature Sensor DHT22 Temperature Sensor Specifications Measuring range Temperature  -40 to 80 ℃ Measuring Range Humidity  0 to 99.9%RH Resolution Temperature  0.1 ℃ Resolution Humidity  0.1%RH Dimensions  3 x 2 x 1 cms  Weight  5 grams

STC-3028 Digital Temperature Humidity Controller 110-220V The STC-3028 Digital Temperature Humidity Controller 110-220V is a digital temperature and humidity controller that can be used for various applications. It has a dual display and can be used with an AM2120 waterproof sensor. The device has a temperature range of -50℃~110℃ and a refreshing frequency of 0.5s. It can switch between cool and heat modes and has a temperature calibration feature. The device is powered by AC 220V and has a 10A relay. It comes with a sensor probe and can control temperature and humidity at the same time. The device is suitable for use in various sensor control boxes, water heaters, freezers, fans, and refrigerators. Features Dual display for temperature and humidity readings Can be used with an AM2120 waterproof sensor Temperature range of -50℃~110℃ Refreshing frequency of 0.5s Can switch between cool and heat modes Has a temperature calibration feature Powered by AC 110-220V Has a 10A relay Comes with a sensor probe Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators Applications: Home fridges Water heaters Freezers Fans Sensor control boxes Refrigerators Dehumidifiers Electronic hobby kits Package Includes: 1 x  STC-3028 Digital Temperature Humidity Controller 110-220V Specifications Product Model: STC-3028 Supply Voltage: AC 110V-220V Temperature Range: -20°C ~ +80°C Measuring humidity range: 00%RH～+100%RH Accuracy: ±1°C 0.1%RH Producti Size: 75mm*85mm*35mm Applicable Scene: Various sensor control boxes, water heater, freezer, fan (Not limited to the devices)

DHT22 Temperature Sensor DHT22 Sensor is a premium quality Humidity & Temperature Sensor from Techtonics. Moglix is a well-known e-commerce platform for a qualitative range of Humidity & Temperature sensors. All DHT22 sensors, TECH1120 are manufactured by using quality-assured material and advanced techniques, which make them up to the standard in this highly challenging field. DHT22/AM2302 Digital Temperature & Humidity Sensor is a low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so sensor readings can be up to 2 seconds old. Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin, and the rightmost pin to the ground. Although it uses a single wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin. check out : DHT22 Temperature Sensor ( Pack of 25) PACKAGE INCLUDES: 1 x DHT22 Temperature Sensor SPECIFICATIONS: Measuring range Temperature  -40 to 80 ℃ Measuring Range Humidity  0 to 99.9%RH Resolution Temperature  0.1 ℃ Resolution Humidity  0.1%RH Dimensions  3 x 2 x 1 cms  Weight  5 grams

BME 280 Temperature Sensor Module This BME280 Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has been designed to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring. The on-board BME280 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature.This bme280 sensor uses an environmental sensor manufactured by Bosch with temperature, a barometric pressure sensor that is the next generation upgrade to the popular BMP085/BMP180/BMP183 Sensor. This bme 280 sensor is great for all sorts of weather sensing and can even be used in I2C interface. This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy.The BME280 is the next-generation of sensors from Bosch, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.

BME680 Digital Humidity Temperature Pressure High Altitude Sensor Module Discover an unparalleled sensor module, the BME680 Digital Humidity Temperature Pressure High Altitude Sensor Module, for precise environmental measurements. This module ensures accurate readings of humidity, temperature, and pressure, making it an ideal choice across various applications. Whether you're an enthusiast or professional, the BME680 module offers unmatched versatility. It seamlessly integrates with popular development platforms like Arduino and Raspberry Pi, simplifying the incorporation into IoT projects, home automation systems, and smart devices. Leveraging its advanced capabilities, this sensor module empowers you to monitor and analyze air quality, making it perfect for both indoor and outdoor environments. Stay updated on weather conditions, establish data logging systems, and enhance industry applications with the precise measurements provided by the BME680. Witness accuracy, efficiency, and innovation with the BME680 module.

12V Mini Digital Air Humidity Control Controller MH13001 12V Digital Air Humidity Control Controller Range designed as digital humidity control controller. It comes with a wide humidity measuring range and controlling range consisting of a humidity controller sensor probe with cable. This humidity Capacitive Digital Temperature and Humidity Module is a temperature and humidity composite sensor providing a calibrated digital signal output. This digital output is displayed via an LCD. The display is red that shows three “LED” digits, which clearly shows the temperature full value (no decimal place). Humidity sensors make use of high-precision capacitive faster chip which has the advantage of high accuracy to reflect. It offers a Humidity measuring range of 1 percent ~ 99 percent RH and also has a control range of 1 percent RH. In this module, the humidification and dehumidification are set via the menu, thus the parameters have been set for the power outage permanent memory function. Package Includes: 1 x Mini Digital LED Humidity Controller Mini Digital LED Humidity Controller Specifications Working Voltage  DC12V +/-10%  Rated Current  10A Power Consumption <3W Measurement Precision  1%RH Control Precision  1%RH Dimensions  8.5 x 7.5 x 3.5cms Weight  200 grams

XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe This is XH-W3001 DC 12V 120W Digital Temperature Controller Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃. The LED Display shows the results clearly. One can directly install or embed the XH-W3001 in the industrial control equipment panel, which is convenient and quick. This temperature controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmentally protective. Digital display LLL: If the digital tube displays LLL, the sensor is faulty. Please repair the sensor or replace the sensor. Digital display HHH: If the digital tube displays HHH, this is because the detected temperature is beyond the measurement range.  BUTTON FUNCTIONS OF THE XH-W3001 CONTROLLER: Press UP to show the start temperature button. On Long press of the UP button, the display starts flashing, then press the UP or DOWN button Set the beginning of the temperature value Press Down the display button to stop the temperature. On the Long press of the Down button, the display starts flashing, then press the Up or Down button Set to stop the temperature value. Applications: Hatching area Incubation Equipment case Air conditioning system Temperature control protection Cabinet cooling system Also check the XH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch. It is a digital thermostat switch designed for heating control in refrigeration and is suitable for seafood machines. PACKAGE INCLUDES:  1 x XH-W3001 DC 12V 120W Temperature Controller SPECIFICATIONS: DC Output DC 12V 120W Temperature Measuring Range -50~110°C Temperature Control Range -50~110°C Control Accuracy Up to 0.1℃ Dimensions  11 x 5 x 3cms  Weight  150 grams

TEC1 12706 Peltier Module The TEC1-12706 6A Thermoelectric Cooler Peltier Module is the simple application of the Peltier Thermoelectric Effect. The Peltier module features 127 semiconductor couples in the area of 40 x 40mm which very effectively cools and heats up to 90°C. The thermoelectric cooler or TEC or Peltier module creates a temperature differential on each side. One side gets hot and the other side gets cool. They use to either warm something up or cool something down; above all, you can use either side. You can also take advantage of a temperature differential to generate electricity. A thermoelectric cooler (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely useful in industrial areas, for example, computer CPUs, CCDs, portable refrigerators, medical instruments, and so on. Tips: Operating Temperature: 138 Degree C. Do not exceed Imax or Vmax when operating a module. Please carry out moisture protection options (sealing) in final application use. Life expectancy: 200,000 hours. Failure rate based on long-time testing: 0.2%. Read our blog Peltier module working principle. Applications: Computer CPUs CCDs Portable refrigerators Medical instruments Also check DIY semiconductor cooling kit that includes a TEC1-12706 Thermoelectric Cooler Peltier Module. Package Includes: 1 x TEC1 12706 Peltier Module Specifications: Model TEC1-12706 Operating Voltage 12VDC Maximum Operating Current 6.4A Maximum Power  92W Maximum Temperature 138 (°C) Wire Length 200 mm Dimensions  40 x 40 x 3.6mm Weight  25 grams

DC 3-5V MAX6675 Module + K Type Thermocouple Temperature Sensor Thermocouple Sensor Set M6 Screw and Jumper Wire F to F  This MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) for giving an accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12-bit resolution providing temperature readings from 0°C to 1024°C (max temperature of the supplied sensor is 450°C) with a resolution of 0.25°C. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Ardunio development board. Package Includes: 1 x MAX6675 Module 1 x K Type Thermocouple Sensor 1 x Set of Jumper Wires Specifications: Interface  3 Serial SPI Interface Operating Voltage 3 to 5.5V Temperature Range 0 to +1024 (°C) Cold Junction Compensation Range -20 to +80(°C) Package Dimensions  11 x 8 x 2 cms Weight  50 grams

W1209 with 12V Adapter, DC Fan, DC female Jack and Alligator Clips The combo of a W1209 digital thermostat temperature controller with a 12V 2AMP adapter, a 12V DC 0.15A fan, a DC female jack/splitter, and alligator clips is a package of components that can be used to build a temperature control system. The W1209 digital thermostat controller is a standalone device that allows you to control the temperature of a system or process using a digital interface. It includes a temperature sensor, a control algorithm, and an output mechanism to control the temperature. The 12V 2AMP adapter is a power supply that converts AC power to 12V DC power, which is used to power the controller and other components. The 12V DC 0.15A fan is a small cooling fan that can be used to dissipate heat from the system. The DC female jack/splitter is a connector that allows you to split a single DC power source into multiple outputs. The alligator clips are used to make temporary electrical connections. Together, these components can be used to build a temperature control system for a wide range of applications including HVAC systems, incubators, ovens, and other temperature-controlled environments. Package Includes: 1 x W1209 Digital Thermostat Temperature Controller  1 x 12V 2AMP Adapter 1 x 12V DC 0.15A Fan 1 x DC female Jack/Splitter  2 x Alligator Clips Specifications: Model No. W1209 Voltage 12V  Adapter Output Voltage  12V Adapter Output Current 0.15A

110V~ 220V AC All-Purpose Temperature Control Controller with Sensor 2 Relay Output Thermostat Stc-1000 This is a 110V~ 220V AC All-Purpose Temperature-controlled thermostat switch that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 220V AC connected at the input terminals. The Temperature module has two output ports where you can connect the equipment to heat or cool the test system.  It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 99℃. The LED display shows the results clearly. One can directly install or embed the STC-1000 in the industrial control equipment panel, which is convenient and quick. It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmentally protective. Application: Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that could present a risk to life or property Domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment, and another temperature-controlled system. Package Includes: 1 x Mini Digital LED Humidity Controller Specifications: Working Voltage  AC220V +/-10% Rated Current  10A Power Consumption <3W Measurement Precision  1%RH Control Precision  1%RH Dimensions  8.5 x 7.5 x 3.5cms Weight  200 grams

ASAIR Temperature and Humidity Sensor AM2302 (Original) The AM2302 is a wired version of the DTH22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.Connect the red 3-5V power, the yellow wire to your data input pin, and the black wire to the ground. Although it uses a single wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin.Compared to DTH11, this sensor is more precise, more accurate, and works in a bigger range of temperature/humidity, but it's larger and more expensive. There is a 5.1K resistor inside the sensor connecting Vcc and DATA so you do not need additional pullup resistors. Also check the AM2302 Temperature & Humidity Sensor available on Iotcart. The sensor is suitable for 0-100 percent humidity readings with 2-5 percent accuracy and -40 to 80 degrees Celsius temperature readings with ± 0.5-degree Celsius accuracy. It has a sampling rate of no more than 0.5 Hz (once every 2 seconds) and comes in a 4-pin single-row pin package for easy connection. Package Includes: 1 x ASAIR Temperature and Humidity Sensor AM2302  Specification: Model AM2302 Supply Voltage (V) 3.3 to 5 Current 5mA Humidity 0-100% Humidity Accuracy 2-5% Temperature -40 to 80 DegC Temperature Accuracy 0.5 DegC Sampling Rate 0.5 Hz (Once every 2 seconds) Wire Length 3 wires 23cm long (9") Dimensions 27x59x13mm Weight 20g

DHT11 Humidity and Temperature Sensor Module The DHT11 Humidity and Temperature Sensor Module is capable of sensing both temperatures as well as humidity. This makes it ideal for projects as well as automation. The board is also equipped with a high-performance 8-Bit microcontroller connected to the DHT11 sensor module. The output of the DHT11 Temperature Sensor Module is in the form of a digital signal on a single data pin. The sensing update frequency is to be measured every 2sec (0.5Hz). The DHT11 Sensor Module can be interfaced with any microcontroller like Arduino, Raspberry Pi, etc. This Sensor module integrates the DHT11 sensor and other required components on a small PCB. The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component, and a high-performance 8-bit microcontroller inside, and it provides calibrated digital signal output. The Module has high reliability and excellent long-term stability, thanks to the exclusive digital signal acquisition technique and temperature & humidity sensing technology. DHT11 sensor module pin description 1 Vcc  Power +Ve (3.3VDC to 5.5VDC Max wrt. GND) 2 Out/Data Outputs both Temperature and Humidity through serial Data 3 Ground Power Ground or Power –Ve   Read more : Interfacing the DHT11 sensor with the ESP32 board Applications: Measure temperature and humidity Local Weather station Automatic climate control Environment monitoring Home Automation Package Includes: 1 x DHT11 Humidity and Temperature Sensor Module Specifications: Operating Voltage 3.3VDC to 5.5VDC Temperature measuring range 0~+50degree Humidity measurement accuracy ±5.0%RH Humidity measuring range 20%~90%RH Temperature measurement accuracy ±2.0degree  Dimensions 3 x 3 x 1cms  Weight 5 grams

Thermoelectric Peltier Refrigeration Cooling System DIY Kit With TEC-12706 Peltier  Semiconductor coolers are a form of solid-state cooling that incorporates both semiconductor technologies and electronic assembly techniques. The thermoelectric Peltier refrigeration cooling system DIY kit is one such example. The DIY kit is a semiconductor cooling kit that uses a TEC1-12706 Thermoelectric Cooler Peltier Module. The kit has 2 heat sinks, the bigger one is for the hotter side and the smaller one is for the cooler side. The bigger the heat sink, the greater dissipation of the heat. The fan, also included in this kit acts as a radiator. This is attached to the bigger heat sink. The TEC1-12706 thermoelectric Peltier module is sandwiched between the two heat sinks. The module will reduce the temperature. Note: This is an unassembled kit.  How To Assemble The Thermoelectric Peltier Refrigeration Cooling System DIY Kit: First, take the large heatsink and the cotton washer (which will hold the Peltier in place), remove the cotton washer’s sticker and place it on top of the large heat sink, making sure to align it. Apply thermal grease or heatsink compound before installing the TEC1-12706 Peltier module (the heatsink compound/thermal grease increases the heat transfer rate). Then, firmly press the TEC1-12706 Peltier module against the heatsink (Remember the cold side of the Peltier module is always the surface with letterings) Apply the heatsink compound/thermal grease above the TEC1-12706 Peltier module and place the small heatsink on top of it and attach the screws Place the brushless dc fan on top of the large heat sink, align it properly, and screw it in place. Next, attach the safety grill to the brushless dc fan and then screw it in place. Read our blog Peltier module working principle where we explained what is a Peltier Cooler, how it works, things to keep in mind while using a Peltier, and applications of Peltier.

Acrylic Case for XH-W1209 Temperature Controller An acrylic case for an XH-W1209 temperature controller is a protective enclosure made of acrylic (a type of plastic) that is designed to hold and protect the XH-W1209 temperature controller. It may have openings for the various connectors and controls on the temperature controller, as well as ventilation holes to allow air to circulate and prevent overheating. An acrylic case can help to prevent damage to the temperature controller from impact, dust, and other environmental factors. It can also improve the appearance of the temperature controller by enclosing it in a clear or colored enclosure. Acrylic cases are often used to protect and display electronic devices such as temperature controllers, Raspberry Pi boards, and other hobbyist or DIY projects. It includes all assembly hardware. It is shipped unassembled, assembly is required. Also, read our blog W1209 Temperature Controller Setting detailing the variety of W1209 Setting Modes. Package Includes: 1 x Acrylic Case For XH-W1209 Temperature Control Module  1 x Fitting Accessories Set Specifications: Case for XH-W1209 Temperature Control Material Acrylic case Color Transparent Dimensions  6 x 5 x 0.5 cm Weight  25 grams