GSR Skin Current Sensor V2.0 The Galvanic Skin Response (GSR) Skin Current Sensor V2.0 is a sort of biosensing module that gauges the electrical conductance of the skin (GSR).  This is an upgraded version of the previous GSR Skin Current Sensor module. It generally includes the same features and working principles of the previous version but it has some improvements such as higher precision, better accuracy, and more stable performance. It is typically used in research, educational and personal use. Skin conductance is used as an indication of psychological or physiological arousal. The device measures the electrical conductance between 2 points and is essentially a type of ohmmeter. Package Includes: 1 x GSR Skin Current Sensor V2.0 Specifications: Input Voltage 5V/3.3V Sensor sensitivity Adjustable Dimension(LxW) 101 x 70mm Weight 20gm

R307 Optical Fingerprint Sensor Module The R307 Optical Fingerprint Reader makes fingerprint scanning straightforward. It connects easily to microcontrollers or PCs using a TTL UART interface or through a MAX232/USB-Serial adapter. You can store fingerprints on the device and set it to recognize individuals in different ways. This fingerprint sensor module includes an optical sensor, a fast processor, and smart algorithms for capturing and matching fingerprints. It works with 3.3V or 5V microcontrollers and is great for projects like access control systems, attendance tracking, or secure locks. It’s small, uses little power, and captures clear fingerprint images with a resolution of up to 500 dpi. check out: FM220U Finger Print Scanner R307 Optical Fingerprint Sensor Module Pinout: Also, check out: Mantra MFS-100 Biometric Finger Print C-Type Scanner Package Includes: 1 x R307 Optical Fingerprint Sensor Module Specifications Operating voltage 4.2 ~ 6 VDC Current consumption ≤75mA Verification Speed 0.2 sec Scanning Speed 0.3 sec Character file size 256 bytes Template size 512 bytes Dimensions  3 x 2 x 1cms  Weight  25 grams

AD8232 ECG Module Heart Rate Monitor Kit AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily. It is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement. The AD8232 sensor module to monitor Heart Rate breaks out nine connections from the IC that you can solder pins, wires, or other connectors to. SDN, LO+, LO-, OUTPUT, 3.3V, and GND provide essential pins for operating this monitor with an Arduino or other development board. Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heartbeat.  Biomedical Sensor Pads and Sensor Cables are required to use the heart monitor.

Gravity: Offline Voice Recognition Sensor for micro:bit, Arduino, ESP32 - I2C & UART  Get ready to be amazed by the Gravity Offline Language Learning Voice Recognition Sensor's ability. It's a fantastic tool for improving your technology. Imagine interacting with your ESP32, Arduino, or Micro projects and having them react right away without requiring an internet connection! Whether you're into cool home gadgets or tinkering with school projects, this sensor makes it super easy. You get over 121 commands right out of the box, like saying "Play music" or "Turn on the lights." And if that's not enough, you can teach it up to 17 new tricks, like making it respond to your pet's sounds! Best part? It keeps your data secret since it operates without the internet. There is no need to worry about data leaks. Also, it comes pre-installed with speakers and a microphone, so now get rid of the need for additional equipment in your projects. So the Gravity Voice Recognition Sensor is the perfect tool whether you're creating a smart assistant, setting up interesting projects at home, or adding more interactivity to learning. It is clear-cut, simple to use, and prepared to elevate your thoughts!

R300 Uart Interface Capacitive Fingerprint Module The R300 UART Interface Capacitive Fingerprint Module is a type of fingerprint sensor module that uses capacitive technology to scan and recognize fingerprints. The module is designed to be connected to a microcontroller or other host device through a UART (universal asynchronous receiver-transmitter) interface, which allows for communication between the module and the host device using serial communication protocols. The module can be used as a stand-alone fingerprint identification system thanks to a fingerprint sensor, a microcontroller, and a collection of communication and control circuits. The module has the ability to take and store fingerprints, compare them to a pre-registered database, and perform other fingerprint-related tasks. Security systems, access control systems, time and attendance monitoring systems, and other devices that demand fingerprint authentication frequently employ the R300 UART Interface Capacitive Fingerprint Module. Communication interface : UART. 1:N Identification (One-to-Many). 1:1 Verification (One-to-One). High speed fingerprint identification algorithm engine. Package Includes: 1 x R300 Uart Interface Capacitive Fingerprint Module Specifications: Dimensions  3 x 2 x 1cms  Weight  5 grams

Speech Recognition Module The Voice Recognition Module can recognize as many as 15 voice instructions and be suitable for most cases involving voice control. It receives configuration commands or responds through a serial port interface. The Speech Recognition Sensor Module can control cars or other electrical devices by voice. It can store 15 pieces of voice instruction. Those 15 pieces are divided into 3 groups, with 5 in one group. First, we should record the voice instructions group by group. After that, we should import one group by serial command before it can recognize the 5 voice instructions within that group. If we need to implement instructions in other groups, we should import the group first. This module is speaker-independent. If your friend speaks the voice instruction instead of you, it may not identify the instruction. Package Includes: 1 X Speech Recognition Module Specifications:  Voltage 4.5-5.5V Current Less than 40mA Digital Interface 5V TTL level UART interface Analog Interface 3.5mm mono-channel microphone connector + microphone pin interface Recognition accuracy 99% (under ideal environment)

Heart Rate Pulse Sensor Module Pulse Sensor is a low-cost, very small-size plug-and-play heart rate sensor for Arduino and Arduino compatible boards. It can be used by students, artists, athletes, makers, and game & mobile developers who want to incorporate live heart-rate data into their projects easily. Pulse Sensor Amped adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. Pulse Sensor works with either a 3V or 5V Arduino.  A Color-Coded Cable, with standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. An Ear Clip perfectly sized to the sensor. It can be hot-glued or epoxied to the back of the sensor to get a reading from an ear lobe. Parts to make a handy Velcro finger strap. This is another excellent way to get heart-rate data. read more : Beginner Guide to Biomedical Sensors Heart Rate Pulse Sensor Module Video Tutorial: Video Tutorial on Heart Rate Monitoring with Arduino Pinouts: Pinout of Heart Rate Pulse Sensor Module Ao -  Analog value output connector VDC - Connect to 3.3V-5V GND - Connect to GND Applications: Sleep Tracking Anxiety monitoring Remote patient monitoring or alarm system Health bands Complex gaming consoles Package Includes: 1 x Pulse Sensor Module Specifications: Power supply voltage 3.3V ~ 5V PCB Diameter (mm) 15 Package Dimensions  8 × 6 × 2 cm Weight  50 grams

Muscle Sensor Kit This EMG Sensor or Muscle sensor V3.0 With Cable And Electrodes will measure the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending on the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. Required  Power supply voltage: min. +-3.5V. By detecting the electromyogram (EMG), measuring muscle activity has traditionally been used in medical research, however with shrinking but more powerful microcontrollers and integrated circuits the advent of EMG power Road and sensors can be used for various control systems. This EMG Muscle Sensor measures, filters, rectifies, and amplifies the electrical activity of a muscle and produces an analog output signal that can easily be read by a microcontroller, enabling novel, muscle-controlled interfaces for your projects. To use this Muscle sensor you will need few components like batteries , jumper wires , breadboard and arduino Wiring Instructions: To use this sensor, the user must have three electrodes connected to the subject’s body. The reference electrode should be placed on an inactive section of the body, such as the bony portion of the elbow, shin or forearm. This electrode should be connected to the black or brown cable. The two other electrodes should be placed along the muscle selected to be measured. The second electrode should be placed along the mid-length of the muscle; this electrode should be connected to the red cable. The last electrode should be placed at the end of the muscle and connected to the blue cable. Finally, connect pin SIG to an analog input pin of your microcontroller and the GND pin to the ground pin on your microcontroller. Package Includes: 1 x EMG Muscle Sensor V3.0 Module. 3 x Electrode Pad. 1 x Connecting Cable. Specifications Operating voltage  5V Audio-style plug 3.5 mm jack Length of connecting cable 1 m Dimensions  3.3 x 2.6 x 1.5cms Weight  100 grams

Microwave Radar Human Body Sensor The Microwave Radar Human Body Sensor has a Transmission signal processing control chip rcwl-9196. This human body sensor has a Wide operating voltage range of 4.0-28V. The RCWL-0516 Microwave Radar Sensor is a mini doppler radar sensor module equipped with supporting DC 4-28V wide voltage. It is an alternative to the PIR sensor and uses in many security alarms system. This is a mini radar motion sensor module equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically continuously output the high-level TTL signal when there is motion with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc. The output of the RCWL-0516 sensor is analog and can be connected to an analog input of a microcontroller and sampled by an ADC. The output voltage is roughly proportional to the distance between the sensor and the object. However, since it relies on a Doppler radar system, signal reflections from other nearby objects can interfere with the measurement, making it less reliable and accurate than other kinds of sensors. The reflections from different kinds of objects can also influence measurements, for example, metallic objects have a stronger reflection than plastic objects. Pinouts: Pinout of RCWL-0516 Microwave Radar Sensor CDS — Sensor disable input (low = disable) VIN — 4- to 28-V DC supply input OUT — HIGH (3.3 V) motion detected/LOW (0 V) idle GND — Ground/0 V 3V3 — Regulated DC output (100 mA max) Applications: Distance sensing Radar applications Package Includes: 1 x Microwave Radar Human Body Sensor Specifications: Operating Voltage  4 ~ 28VDC Max. Operating Current 3mA Transmitting Power 20mW (typical); 30mW (max) Output Voltage 3.2 ~ 3.4 Output Voltage Driving Capacity 100mA Trigger Way Repeat Trigger Output Control Low Level 0V Output Control High Level 3.3V Operating Temperature  -20 to 80°C Dimensions 3 x 2 x 1cms  Weight 5 grams

Eye Blink Sensor An eye blink sensor relies on infrared technology to detect if a person's eye is closed. The sensor is made up of two components: an infrared transmitter and an infrared receiver. The transmitter emits infrared waves onto the eye, while the receiver searches for changes in the reflected waves, indicating that the eye has blinked. The sensor's output is sent to a microcontroller board, such as Arduino, Raspberry Pi, AVR, PIC, or other microcontrollers. To create an eye blink sensor with an Arduino, one requires an eye blink sensor, an Arduino board, and a switch between the power supply and the Arduino. The sensor has three pins: GND (ground), 5V, and OP (output). The sensor's output is transmitted to the Arduino board, which can be programmed to execute various tasks based on the output.   Note: This eye blink sensor is strictly restricted for hobby projects and not recommended for real-time use.  Pinouts: VCC(Power) GND(Ground) DO(Digital Output) Applications: Digital Eye Blink Monitor Vehicle Accident Prevention using eye blink sensor Suite for real-time driving applications Facility to interface microcontroller devices Package Includes: 1 x Eye Blink Sensor Specifications TTL output 5V or 0V Sensor Type  IR Sensor Dimensions  11 x 9 x 3cms  Weight  50 grams

Voice Recognition Module Voice recognition is a technique that facilitates a natural and convenient human-machine interface using the voice recognition module. It extracts and analyses voice features of humans delivered to a machine or computer through the mic. The Voice recognition technique is classified into many types based on different criteria such as the scope of the users, the number of words used for recognition, and the naturalness of speaking. If the voice recognition level is more than 95%, then only voice recognition is practically used.  Speak (Voice) Recognition Sensor Module V3.1 compatible with Arduino is a compact and easy-control speaking recognition board. Speak (Voice) Recognition Module V3.1 product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as the command. Users need to train the module first before letting it recognize any voice command. This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of a function). General Output Pins on the board could generate several kinds of waves while the corresponding voice command was recognized. Applications:  Long-distance-speech-recognition system A robotic vehicle using a cell phone Package Includes: 1 x Voice Recognition Module V3.1 1 x Microphone. Specifications Supply Voltage 4.5 – 5.5 V Current <40 mA Digital Interface 5V TTL level for UART interface and GPIO Current <40 mA  Package Dimensions  6 × 8 × 2 cm Weight  100 grams

MAX30100 Pulse Oximeter Heart Rate Sensor Module MAX30100 Pulse Oximeter Heart Rate Sensor Module is an integrated pulse oximeter and heart-rate monitor sensor solution. It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. This particular LED colour combination is optimized for reading the data through the tip of one’s finger. It is fully configurable through software registers and the digital output data is stored in a 16-deep FIFO within the device. It has an I2C digital interface to communicate with a host microcontroller. The pulse oximetry subsystem in MAX30100 sensor consists of ambient light cancellation (ALC), 16-bit sigma delta ADC, and proprietary discrete time filter. It has an ultra-low-power operation which makes it ideal for battery operated systems. MAX30100 operates on a supply in the range of 1.8 to 3.3V.It can be used in wearable devices, fitness assistant devices, medical monitoring devices, etc. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down through software with negligible standby current, permitting the power supply to remain connected at all times. Package Includes: 1 x MAX30100 Pulse Oximeter Heart Rate Sensor Module Specifications: Working voltage 1.8 ~ 5.5V Shutdown Current 0.7µA Color Green Dimensions(mm) 19 x 14.5 x 3 Weight (gm) 2

Mantra MFS-100 Biometric Finger Print C-Type Scanner The Mantra MFS100 Finger Print sensor can be used for authentication, identification, and verification functions that let your fingerprint act like digital passwords that cannot be lost, forgotten, or stolen. The hard optical sensor is resistant to scratches, impact, vibration, and electrostatic shock. The Mantra MFS100 Finger Print Sensor is a biometric device for authentication and identification through a fingerprint recognition module that has superior execution, precision, and toughness based on the fingerprint reader. It is safe and easy to use the device for security compared to remembering the password which is vulnerable to fraud and difficult to keep in mind. Utilize Mantra MFS100 Finger Print sensor with our biometric software for verification, identification, and authentication functions through fingerprints can act like computerized passwords that cannot be misplaced, overlooked, or stolen. The STQC-certified Mantra MFS100 Finger Print Scanner is made of hard optical sensor which is resistant to scratches, impact, vibration, and electrostatic shock. Plug and play USB 2.0 high-speed interface supports multiple device handling. 500 dpi optical fingerprint sensor scratch-free sensor surface Supports Windows 7,8,10, Windows Vista, Windows 2000, Windows Server 2003/2007/2008, Linux, Windows ME, Windows 98 SE SDK, Libraries, and Drivers support across all the above Platforms. (32 Bit and 64Bit) Easy Integration to production servers and application support. It works in Sim activation, PayTM KYC, Jeevan Pramaan, CSC, Digital Signatures, Mutual Fund KYC, Digital Locker, and other supported sites only. Note:  Drivers to be installed from the link provided in the product manual. It does not work on rooted mobiles.  Applications: PC/network security  Time and attendance system Smart card application Health and medical KYC Package Includes: Mantra MFS100 Scanner OTG Cable Cleaning Cloth Product Manual Specifications: Brand Mantra Model Name Mantra MFS100 C-Type Scanner Scanner Type C-Type Fingerprint Scanner Interfaces USB, Mini USB Item Dimensions LxWxH 13 x 9 x 6 Centimeters Item Weight  150 g

Heart Rate Pulse Sensor Module Pulse Sensor is a low-cost, very small-size plug-and-play heart rate sensor for Arduino and Arduino compatible boards. It can be used by students, artists, athletes, makers, and game & mobile developers who want to incorporate live heart-rate data into their projects easily. Pulse Sensor Amped adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. Pulse Sensor works with either a 3V or 5V Arduino.  A Color-Coded Cable, with standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. An Ear Clip perfectly sized to the sensor. It can be hot-glued or epoxied to the back of the sensor to get a reading from an ear lobe. Parts to make a handy Velcro finger strap. This is another excellent way to get heart-rate data. Heart Rate Pulse Sensor Module Video Tutorial: Video Tutorial on Heart Rate Monitoring with Arduino Pinouts: Pinout of Heart Rate Pulse Sensor Module Ao -  Analog value output connector VDC - Connect to 3.3V-5V GND - Connect to GND Applications: Sleep Tracking Anxiety monitoring Remote patient monitoring or alarm system Health bands Complex gaming consoles Package Includes: 25 x Pulse Sensor Module Specifications: Power supply voltage 3.3V ~ 5V PCB Diameter (mm) 15 Package Dimensions  8 × 6 × 2 cm Weight  50 grams

MAX30100 Pulse Oximeter Heart Rate Sensor Module MAX30100 Pulse Oximeter Heart Rate Sensor Module is an integrated pulse oximeter and heart-rate monitor sensor solution. It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. This particular LED colour combination is optimized for reading the data through the tip of one’s finger. It is fully configurable through software registers and the digital output data is stored in a 16-deep FIFO within the device. It has an I2C digital interface to communicate with a host microcontroller. The pulse oximetry subsystem in MAX30100 sensor consists of ambient light cancellation (ALC), 16-bit sigma delta ADC, and proprietary discrete time filter. It has an ultra-low-power operation which makes it ideal for battery operated systems. MAX30100 operates on a supply in the range of 1.8 to 3.3V.It can be used in wearable devices, fitness assistant devices, medical monitoring devices, etc. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down through software with negligible standby current, permitting the power supply to remain connected at all times. Package Includes: 25 x MAX30100 Pulse Oximeter Heart Rate Sensor Module Specifications: Working voltage 1.8 ~ 5.5V Shutdown Current 0.7µA Color Green Dimensions(mm) 19 x 14.5 x 3 Weight (gm) 2