M5 Stack PROTO Module with Extension & Bus Socket PROTO is a pure universal prototype perboard. You can have the total freedom to make your own project as you want it, with prototyping perboards that allow laying out the customized circuit to interact with the M5 core via M-BUS. Package Includes: 1 x M5 Stack PROTO Module Specifications: Dimension 54.2 x 54.2 x 12.8mm Weight 22gm

M5 Stack PLC Proto Industrial Board Module M5 Stack PLC M12 is a Base specifically designed for industrial application. DC Power in 9-24V. Does this PLC remind you of the 'PLC' in industrial control short for 'Programmable Logic Controller'. This PLC base is not the typical 'PLC' used in the programmable controller, but its does able to implement the most common controller in the industrial field. Based on the current M5 development system, you can add as many Relays as you want, you can enable the TTL-RS485 communication, you can layout your customized circuit on the protoboard. you also can make it a LoRa node by stacking a LoRa module etc. This base gives you an unlimited number of combinations, it is powerful, flexible, and covered with an industrial-grade case. If you happen to work in an industrial field, We especially recommend this PLC base to you which will surely give you the best and the fastest way to resolve your requirement. Also check M5Stack ATOM Matrix. The board is small and has many built-in components, making it suitable for portable and miniature projects. It has an ESP32 chip with Wi-Fi and Bluetooth, an LED matrix, an inertial sensor, and a button. It can be programmed using Arduino or UIFlow. Also check M5StickC ESP32-PICO Mini IoT Development Kit. The M5StickC ESP32-PICO is a small, open-source development board that is good for prototyping IoT projects. It has a lot of features Package Includes: 1x PLC-Proto Broad1x RS485 module1x PLC Plastic Enclosure1x Slide Guide1x Magnet1x 6 Pin 3.96 Pitch Terminal1x 4 Pin 3.96 Pitch Terminal3x HEX KEY7x Screw (Three models: M2x4, M3x6, M3x18)1x Sticker Specifications: Dimensions 54 x 54 x 28mm Weight 133gm

M5Stack Goplus2 DC Motor and Servo Driver Module (STM32F0) M5Stack GoPlus2 is a stackable multi-functional motor and servo control module. The master control integrates the STM32F030C8T6 chipset. The module is equipped with a 2-way DC motor drive interface and a 4-way servo drive interface. Three PORT-B interfaces(Analog Input, Digital Output, Digital Input) can be expanded. Built-in 500mAh battery and support infrared (IR) transmission and reception. In order to meet the requirements of a multi-channel interface power supply at the same time, a DC power interface is provided for external power supply, the battery can be charged through the M5Core with USB-C. Communication protocol: I2C(0x38) Applications: Actuator / motor driver Acquisition and control of multiple input and output signals Infrared controller DIY Toy base Package Includes: 1x GoPlus2 Module2x DC Motor Cable Specifications: Main control chip STM32F030C8T6 Expand interface DC Motor x 2,PORT-B x 3, Servo x 4 motor drive DRV8833 IR Transmit and Receive Battery 500mAh Communication protocol I2C：0x38 Dimensions 54 x 54 x 13mm Weight 58gm

M5 Stack COMMU Module Extend RS485/TTL CAN/I2C Port COMMU is a Muti-Communication-Interface-Converter. Integrated with 2I2C, 1TTL, 1CAN, 1RS485. Apparently, COMMU has packed with most of the series communications. Default connection: TTL - UART0, RS485 - UART2. Since the ESP32 pin map is allowed for re-assign, you can re-assign or re-mapping the TTL or RS485 interface to other pins. Be careful about TTL Interface. It is a UART Interface actually by default. But you can switch it to connect with UART2 after changing those jumpers(J6, J7, J9, J10). Package Includes: 1x M5 Stack COMMU Module Specifications: Interface I2C x2, CAN x1, RS485 x1, TTL x1 CAN Controller MCP2515-1/SO RS485 transceiver SP3485EN-L/TR Dimension 54.2 x 54.2 x 13mm Weight 24gm

M5 Stack BUS Module BUS allows you to add your own custom circuit design to the universal prototype perboard so it could interact with the M5Core via M-BUS. Just like other M5modules, BUS can connect with other layers through M-BUS, while in this module, we've extended the M_BUS pin to pin to the other side of the board. You might need to cut off the fence on the side to be able to expose the pins. We've included a 2*15 90 degrees pin set in the package. Also check Guide Rail for M5 Base. It features a spring-type buckle structure and multiple M3 screw holes for flexible installation Package Includes: 1x M5 Stack BUS Module Specifications: Dimensions 54 x 54 x 13mm Weight 23gm

M5Stack LAN Module with W5500 Although the M5 core is ESP32-based, having Wi-Fi and Bluetooth integrated, it doesn't stop you enable the Ethernet function. This LAN is an M5 Base that has a W5500 chip, which is a Hardwired TCP/IP embedded Ethernet controller that provides an easier Internet connection to embedded systems. This Base is specifically designed for industrial application scenarios, comes with a couple of HT3.96 connectors, 485 metal rail, and magnet discs for easy installation and fixation. The 6 pin of the HT3.96 connector are dangling, you can wire them up with the M-BUS and other circuits as you like. Applications: M5Core + LAN implementing a conveyor controller PC transmits video to Core via cable Also check M5 Stack Esp32 downloader kit. It is a USB-TTL adapter board designed for ESP32/ESP8266, featuring a CP2104/CH9102 chip. The kit supports one-touch download without chip and pin-down resetting manually. It includes components like the ESP32 CAM Downloader, ESP32 CAM Pinout Board, a 2.54-6P female header, and two 2.54-3P rows of pins. The USB Interface Type is TypeC, and it operates with a Baud Rate ranging from 300bps to 2Mbps. Also check The M5Stack FIRE IoT Development Kit (PSRAM) V2.6 is a cost-effective Wi-Fi and Bluetooth dual-mode IoT controller based on the Espressif ESP32 main control chip. It features two low-power Xtensa 32-bit LX6 microprocessors with a main frequency of up to 240MHz. The kit includes 8M PSRAM and 16M FLASH memory, a 2.0-inch full-color HD IPS display panel, IMU, LED, microphone, speaker, TFCard slot, and various peripherals. Package Includes: 1x LAN Base 1x TTL-to-RS485 adapter board 1x pin header 20pin 1x metal rails and magnet discs 3x HT3.96 terminal 2x 3pin 1x 4pin 10x cold crimp terminal（red Copper Lugs） 3x HEX KEY   - 1x 1.5mm   - 1x 2mm   - 1x 2.5mm 2x hexagon socket head cap screws M3x28 4x hexagon socket tapping screw KA2x4 1x countersunk head screw M3x8 Specifications: Dimensions 54 x 54 x 28mm Weight 132gm

M5 Stack LoRa Module for ESP32 DIY Development Kit (433MHz) LoRa (433MHz) is a LoRa communication module in the M5Stack stack module series (working frequency is 433MHz). Certain expansion space is reserved on the module, which defeats you for a more functional design. For wireless communication or projects with more customized elements, the LoRa (433MHz) module will be a suitable choice. Applications: Automatic meter reading Home building automation Remote irrigation system Package Includes: 1x M5 Stack LoRa Module Specifications: Dimension 54.2 x 54.2 x 12.8mm Weight 24gm

M5 Stack Battery Module for ESP32 Core Development Kit Would you like to make a demo or prototype that requires long battery life? Perhaps using the battery in the M5GO base and the Basic base is not enough for you.Here comes the BATTERY which is a handy M5modules to upgrade your Lipo battery life. Since the Lipo batteries can work in parallel, you can stack multiple batteries to maximize your power endurance.CAUTION: The safety of the Lipo battery is affected by many conditions. Overcharge, over-discharge, over-temperature, short circuit, crush, and nail penetration may all result in a catastrophic failure, including the pouch rupturing, the electrolyte leaking, and fire. Although every battery we offer have accompanied by a protection circuit board, using Lipo battery in your product still needs to be treated with cautionOnce the BATTERY is stacked underneath the M5 controller, the battery positive pole is connected to the VBAT pin at IP5306 BATTERY: The Battery extension module is a 700mAh battery ADD-ON. Package Includes: 1x M5 Stack BATTERY Module Specification: Dimension 54 x 54 x 14mm Weight 36gm

M5 Stack SERVO2 Module 16 Channels - 13.2 (PCS9685) SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction.The maximum total power output of a dual-channel is 35W (5V / 3.5A * 2), and the maximum output power of a single-channel is 25W (5V / 5A). When the battery base is used for the power supply, the maximum output power is 5V / 2A. The module communicates with the host directly through I2C (the default address is 0x40) however the I2C address can be changed(0x40 - 0x47) through the dial switch. This also means that multiple Servo 2 modules can be stacked and used simultaneously. There is a power switch on the board to control the power supply of Servo 2.Note: The module must use the external power supply of the DC interface when driving the servo. When using the AXP192 power management chip's main control (such as CORE2), the M-BUS power mode needs to be configured as an input when the program is initialized. Applications: Humanoid robot Bionic multi-joint robot 3-axis steering gear pan tilt Package Includes: 1x Servo2 Module1x XT60 power cable(11.5cm) Specifications: Dimensions 54.2 x 54.2 x 13.2mm Weight 28gm

M5Stack Stepmotor Module with MEGA328P (DRV8825) STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control. It is built with MEGA328P has been flashed GRBL firmware. The module communicates with M5Core via I2C(0x70) Integrated 3 DRV8825, a simple but very powerful board that can control one bipolar stepper motor at a time and allows micro-stepping up to 1/32 of a step. Applications: DIY 3D Printer Simple Robot Arm Also check M5Stack Development Board Watch Kit (Excluding Core). The kit is designed for the M5Core series and has a sophisticated look. It also has a 700mAh lithium battery Package Includes: 1x Step Motor Module12V Power (Optional)1x 5V FAN Module for heat dissipation (Optional) Specifications: DC Interface XT30 Motor Interface HY2.0-4P Dimension 54.2 x 54.2 x 12.8mm Weight 34gm