Anycubic Kobra 3 Max 3D Printer – EU power plug

Holybro Power Module PM02 The Holybro Power Module PM02 is a precision-engineered power module designed to supply clean, regulated voltage and current to your drone’s flight controller and onboard electronics. Built for reliability and accuracy, this module ensures your system receives stable power directly from the battery while continuously monitoring real-time voltage and current data. Its compact design and robust connectors make it ideal for a wide range of UAV platforms, from hobbyist builds to advanced autonomous drones. Engineered to integrate seamlessly with popular flight controllers, the PM02 power module not only simplifies wiring and installation but also enhances safety through over-current and over-voltage protection. Whether you’re building a custom multirotor, fixed-wing aircraft, or research UAV, this power module provides dependable energy management so you can focus on performance and flight control precision without compromise. Note: This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X (Requires a digital PM like PM02D). Features: High-quality power module designed to deliver stable and regulated power to drone flight controllers and onboard electronics. Provides real-time voltage and current sensing for accurate battery monitoring and improved flight safety. Ensures clean power output, reducing electrical noise and improving overall system reliability. Simplifies wiring and installation by combining power supply and monitoring in a single compact module. Built for compatibility with a wide range of drone flight controllers and UAV platforms. Ideal for multirotor, fixed-wing, and professional UAV applications requiring dependable power management.

Holybro Kakute H7 V1.3 Flight Controller The Holybro Kakute H7 V1.3 Flight Controller is a high-performance flight controller designed to deliver precise, responsive control for multirotor drones and advanced UAV platforms. Powered by a robust H7 processor and loaded with a rich set of sensors and connectivity options, this controller ensures smooth flight dynamics, reliable stability, and fast processing for real-time flight corrections. Its compact design and durable build make it suitable for both hobbyist builders and professional drone developers looking to push the limits of performance and control. As a versatile drone flight controller, the Kakute H7 V1.3 supports a wide range of firmware and configuration options, enabling seamless integration with popular open-source flight stacks and advanced navigation systems. Whether you’re racing, doing aerial photography, or building autonomous drones, this controller provides the flexibility and precision needed to execute complex flight maneuvers and maintain stable, reliable performance under demanding conditions. Its comprehensive features and ease of setup make it an excellent choice for custom UAV projects and high-end drone builds. Hardware Overview Features: High-performance flight controller designed for precise and responsive drone control. Powered by an advanced H7 processor for fast data processing and stable flight performance. Supports smooth flight dynamics and accurate sensor data handling. Compatible with popular open-source drone flight controller firmware. Compact and robust design suitable for racing, freestyle, and professional drone builds. Ideal for multirotor drones, custom UAV projects, and advanced aerial applications.

SmartElex 5-inch TFT LCD Capacitive Touch Display 800×480 SmartElex 5-inch TFT LCD Capacitive Touch Display (800×480) is a compact graphical interface solution designed for students, hobbyists, engineers, and product developers who need a responsive touchscreen for their projects. It provides a clear and smooth display experience, making it ideal for building user interfaces in prototypes, educational projects, and small production devices. With its capacitive touch panel, users can interact effortlessly through precise touch inputs, making it suitable for applications that need intuitive control and quick navigation without external buttons or controls. This display is well-suited for robotics dashboards, IoT control panels, industrial monitoring, and home automation systems that require real-time interaction. It can be integrated with popular microcontrollers and development platforms like Arduino, Raspberry Pi, and ESP32 through appropriate interface modules, allowing makers and startups to develop projects with minimal setup time. The robust build and consistent touch response help ensure reliable performance in long-term installations, while the versatile visual output supports both experimentation and final project deployment in labs, workshops, and field environments. Features: Bright and clear 5-inch TFT LCD screen with high-resolution visuals for sharp graphics and text Responsive capacitive touch interface for smooth and accurate touch control Wide viewing angles and good color reproduction for easy visibility from different directions Compatible with development platforms like Arduino, Raspberry Pi, and ESP32 with suitable interface support Suitable for interactive user interfaces in robotics, IoT devices, automation systems, and custom control panels Durable design for regular use in prototyping and finished electronic projects

Waveshare 3.5inch Capacitive Touch LCD IPS Display Module 320×480 The Waveshare 3.5-inch Capacitive Touch LCD IPS Display Module is a compact yet powerful display solution featuring a 320 × 480 pixel resolution that delivers crisp visuals and excellent clarity. Designed with an IPS panel, it offers wide viewing angles and consistent color performance, making it ideal for graphical interfaces and interactive applications. The module integrates the ST7796S display driver for reliable display control and the FT6336U capacitive touch controller for accurate, multi-touch responsiveness. Optimized for embedded development, this 3.5 inch LCD Raspberry Pi display is perfectly suited for Raspberry Pi projects, control panels, and custom HMI applications where space, touch precision, and visual quality matter. Features: 320×480 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage Comes with online development resources and manual (examples for Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino) SPI and I2C Control Interfaces: Pin Description 15PIN Pin No. 18PIN Pin No. VCC Power (3.3V / 5V input) 1 1 3V3 Power (3.3V input) 2 NC GND Ground 3 3 MISO SPI MISO pin 4 6 MOSI SPI MOSI pin 5 5 SCLK SPI CLK pin 6 4 SD_CS TF card chip selection, low active 7 10 LCD_CS LCD chip selection, low active 8 9 LCD_DC LCD data/command selection (high for data, low for command) 9 7 LCD_RST LCD reset pin, low active 10 8 LCD_BL LCD backlight pin 11 2 TP_SDA Touch panel data pin 12 14 TP_SCL Touch panel clock pin 13 13 TP_INT Touch panel interrupt pin 14 15 TP_RST Touch panel reset pin, low active 15 12

7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header The 7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header is a versatile and high-precision environmental sensor designed for modern monitoring applications. Built around Bosch’s advanced BME688, it accurately tracks temperature, humidity, air pressure, and gas levels, helping you gain meaningful insights into environmental conditions. Its compact nano form factor and I2C interface make integration simple with Arduino, Raspberry Pi, and other development boards. Whether you’re building a smart home system, an industrial monitoring setup, or an environmental research project, this environmental monitoring sensor delivers dependable performance in a user-friendly design. Features: AI-Enhanced Gas Sensing: Identifies dangerous gasses with exceptional accuracy. Comprehensive Monitoring: A single sensor measures numerous essential environmental factors. Flexible Interface: I2C connectivity enables seamless interaction with microcontrollers. Compact design: The nano breakout board is ideal for projects with limited space. 3.3V Operating Voltage: Suitable for a wide range of development boards. Gas sensor sensitivity, selectivity, and data rate can all be adjusted to meet your individual application requirements.

Cytron MDS160A 160Amp 8V–28V DC Motor Driver The Cytron MDS160A 160Amp 8V–28V DC Motor Driver is a high-power, smart motor controller built for demanding applications such as AGVs, combat robots, industrial conveyors, heavy-duty mobile robots, and high-torque motion systems. With its massive 160A continuous output, support for 8V–28V motors, and silent 16 kHz MOSFET switching, this motor driver ensures smooth, efficient, and reliable operation under extreme loads. It is designed for makers, engineers, and industrial projects that require a robust DC motor controller capable of delivering serious power. Powered by smart onboard firmware, the Cytron MDS160A offers multiple input modes, including RC, PWM+DIR, Analog, and UART, making it highly flexible for different control setups. It provides intelligent safety features such as thermal protection, regenerative braking, and temperature-based current limiting. You can also pair two MDS160A units for plug-and-play differential-drive robotics. Whether you're creating a powerful robot or building custom industrial automation, the Cytron MDS160A delivers the strength, stability, and smart control needed for high-performance motor applications. Features: Bi-directional control for a single brushed DC motor. Supports 8V–28V input voltage, suitable for various high-power applications. Capable of 160A continuous, 175A (2 minutes), and 190A peak for 1 minute. 16 kHz PWM switching frequency ensures silent, smooth motor control. Full MOSFET-based solid-state design - no flyback diodes required. Includes regenerative braking for improved efficiency. Built-in thermal protection and temperature-based current limiting. Multiple operating modes: RC, Analog, PWM+DIR, UART (Serial). Onboard test buttons for quick motor testing without a controller. Can pair with another MDS160A for differential-drive robot applications.

Anycubic Color Engine Pro for Kobra 3 Max - EU plug The Anycubic Color Engine Pro is an advanced automatic filament handling and multi-color printing module designed specifically for the Kobra 3 Max 3D printer. It allows users to print in multiple colors or materials without manually changing filaments, making the printing process more efficient and professional. Smart Multi-Color Printing - Print in 4 to 8 Colors and Filament Backup The smart multi-color printing capability allows users to print models in 4 to 8 different colors seamlessly without the need for manual filament changes. This feature enables the creation of more detailed, visually appealing, and complex designs, making it ideal for creative projects, prototypes, and professional applications. The system intelligently manages filament switching during the printing process, ensuring smooth transitions between colors and consistent print quality. In addition, the built-in filament backup function automatically switches to another spool if the current filament runs out, preventing print failures and material wastage. This ensures uninterrupted printing, improved efficiency, and a more reliable overall printing experience, especially during long or multi-color print jobs. Dries while it Prints in Multi-Color and  Nozzle Clog Detection, Minimizes Filament Tangling The system is designed to dry filament while printing in multi-color mode, ensuring that moisture does not affect print quality during long or complex jobs. By maintaining optimal filament condition, it helps achieve smoother extrusion, better layer adhesion, and more consistent results across different materials. The integrated nozzle clog detection feature continuously monitors extrusion flow and alerts the user or pauses the print if a blockage is detected, reducing the chances of failed prints. Additionally, the design minimizes filament tangling by managing spool movement and filament paths efficiently during switching. This combination of real-time drying, clog detection, and anti-tangling mechanisms ensures a reliable, hassle-free printing experience with improved overall print quality. A New Level of Multi-Color Printing This feature brings a new level of multi-color printing by combining intelligent filament management with seamless color transitions for highly detailed and vibrant prints. It allows users to create complex designs with multiple colors in a single print without manual intervention, enhancing both creativity and efficiency. The system ensures precise filament switching, maintaining consistent extrusion and minimizing color mixing or errors. This results in cleaner finishes, sharper details, and professional-quality output. Whether for prototyping or artistic projects, it elevates the overall printing experience by making multi-color printing smoother, faster, and more reliable. Staying Dry for All Applications The system ensures that filament remains dry throughout the entire printing process, which is essential for maintaining consistent print quality across all applications. By actively reducing moisture absorption, it prevents common issues such as bubbling, stringing, and poor layer adhesion that can occur with damp filament. This is especially important when working with moisture-sensitive materials, ensuring smooth extrusion and reliable performance. The controlled environment helps maintain the integrity of the filament, resulting in cleaner prints and better surface finish. Whether for detailed prototypes or long-duration prints, this feature guarantees dependable results with minimal print defects. Intelligent Printing, Revolutionary Performance This feature delivers intelligent printing combined with revolutionary performance, transforming the overall 3D printing experience. Advanced control systems optimize filament feeding, switching, and extrusion in real time, ensuring smooth and consistent operation throughout the print. The system adapts to different materials and printing conditions, reducing errors and improving efficiency. With precise coordination between hardware and software, it achieves faster print speeds without compromising accuracy or quality. This results in highly reliable, high-performance printing that meets the demands of both professional and advanced creative applications. Staying Dry for All Applications The system is designed to keep filament consistently dry across all types of printing applications, ensuring reliable performance and high-quality results. By preventing moisture absorption, it eliminates common printing issues such as bubbles, stringing, and weak layer bonding. This is especially beneficial for moisture-sensitive materials, allowing them to perform at their best without degradation. The controlled drying environment maintains stable extrusion and improves overall print consistency. Whether handling simple prints or complex multi-color projects, this feature ensures dependable output with clean finishes and reduced failures. Features: Supports automatic filament feeding and switching Enables multi-color 3D printing capabilities Intelligent filament detection for smooth operation Reduces manual effort and printing interruptions Seamless compatibility with Kobra 3 Max printer User-friendly setup and operation Supports multiple filament types Enhances productivity and print quality

7Semi UCC21330 Dual-channel Isolated Gate Driver Breakout Board The 7Semi UCC21330 Dual-Channel Isolated Gate Driver Breakout Board is designed to efficiently drive power transistors like MOSFETs, IGBTs, and SiC devices with a peak source current of 4A and a peak sink current of 6A. Its 3kVRMS isolation barrier ensures safe and reliable operation in high-voltage environments, while programmable dead-time control allows precise timing adjustments to minimize switching losses and prevent shoot-through. Integrated protection features, including undervoltage lockout (UVLO) and a disable function, safeguard your system and enable immediate shutdown when needed. This compact breakout board is perfect for applications such as motor drives, power converters, and industrial automation systems requiring precise and reliable gate driving. Features: Supports dual low-side, dual high-side, and half-bridge configurations for a wide range of power applications. High Current Capacity: 4A peak source and 6A peak sink output provide robust transistor control. Enhanced Protection: All power supplies include UVLO protection and a configurable dead time for safe operation. Precision timing is achieved with a 33ns mean propagation latency and a maximum pulse-width distortion of 5ns. Robust CMTI operation: Common-mode transient immunity of more than 125V/ns enables dependable operation in high-noise settings. Fast Disable Logic: The built-in disable feature allows you to shut down both outputs at the same time.

DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino The DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino is a high-precision Analog pH Sensor designed for professional and industrial applications requiring continuous pH monitoring. This Arduino pH Sensor uses an industrial-grade glass membrane electrode with low impedance, delivering fast response, excellent thermal stability, and stable performance over long periods. It supports a full measurement range of 0 pH to 14 pH with linear voltage output, ensuring accurate and reliable readings. The sensor integrates easily through a BNC connector and PH2.0 interface, allowing direct connection to any Arduino analog input. Its reference system, based on Ag/AgCl gel electrolyte with a PTFE membrane, provides strong anti-pollution characteristics and prevents clogging, making it an ideal industrial pH sensor for Arduino for water treatment systems, environmental monitoring, and laboratory analysis. Attention: The probe's bottle top contains protective fluids (3.3mol/L KCL). Even if the bottle cap is tightly fastened, some protective liquid may leak around it, resulting in white crystals. However, as long as the bottle top contains protective liquid, the probe's life and accuracy will be unaffected. Please use it with confidence. It is recommended that the white crystals be returned to the bottle cap's protective liquid. Features Industrial-grade Analog pH Sensor for accurate measurement Compatible with Arduino and other microcontrollers Measures pH range from 0 to 14 Fast response with high stability BNC connector for secure sensor connection Plug-and-play PH2.0 analog interface Built-in power indicator LED Suitable for long-term online monitoring Low maintenance and long sensor life Ideal for water quality and lab applications Applications Water Quality Surveillance Aquaculture

7Semi DC-DC Buck Converter 14V-60V Input to 5V 3A Output- AP66300 (BO-10189) The 7Semi DC-DC Buck Converter 14V–60V Input to 5V 3A Output – AP66300 (BO-10189) is a compact power module designed to convert high DC input voltages into a stable 5V output with up to 3A current. Its wide input range makes it suitable for applications that use automotive, industrial, or high-voltage power sources. Built on an efficient synchronous buck design, this converter delivers reliable power with low heat generation and minimal energy loss. It is well suited for powering microcontrollers, sensors, communication modules, and other embedded electronics. Whether you’re working on industrial systems, automation projects, or advanced DIY builds, this buck converter provides a dependable and efficient power solution. Features: Wide input range: accepts 14V to 60V DC sources Provides a stable 5V output at up to 3A High-efficiency buck converter design for low energy loss Compact breakout board for easy project use Built-in power protection for safer operation Ideal for automotive, industrial, and embedded electronics Supports powering microcontrollers, sensors, and communication modules Efficient solution for IoT, automation, and high-voltage systems

HGLRC SPECTER F460 Electronic Stack with 4-in-1 ESC The HGLRC SPECTER F460 Electronic Stack with 4-in-1 ESC is engineered to deliver high-performance flight control and efficient power management for FPV drone builds. Combining a flight controller with a 4-in-1 ESC, it provides seamless integration and precise motor control, ensuring smooth and responsive flight characteristics. Equipped with advanced gyroscopic sensors, the stack enhances stability and accuracy, making it ideal for high-speed racing and freestyle flying. Its compact form factor and robust construction allow easy installation while maintaining durability under demanding conditions, making it a reliable choice for both professional racers and hobbyists. Features: The flight control uses an exceptionally steady MPU6000 gyroscope. The flight control primary control chip uses the F405 chip, and the serial connection allows up to four groups, resulting in faster operation and smoother control. The primary chip of the ESC picks a new imported FD6288 processor, which is matched with ON3109 high-performance MOS, and can constantly sustain current and steady output. The socket allows for rapid connection to the camera, receiver, picture transmission, LED, or GPS without the need for welding. Maximum support for BEC 9V2A/BEC 5V2.5A, capable of providing reliable voltage and current output to external devices. The immersion gold high-tech design is temperature- and current-resistant, the ESC has a large pad, and the flight controller is directly plugged in, so there is no issue welding. The integrated 16M black box may record flight data. Onboard galvanometer module, real-time display of data, such as current feedback via the flight control

Bambu Lab H2D-Combo 2 40W Multicolor 3D Printer The Bambu Lab H2D- Combo 2 40W 3D Printer is a high-performance 3D printer designed for precision, speed, and versatility. Equipped with a powerful 40W hotend, it enables fast printing with a wide range of materials, including high-temperature filaments. Bambu Lab H2D- Combo 2 40W 3D Printer combo package is built for users who demand consistent quality and efficiency in their 3D printing projects. With advanced features and robust build quality, the H2D-Combo 2 is ideal for both professional and enthusiast applications, offering a reliable solution for detailed and complex prints. Multi Material Printing Integrate both flexible and rigid materials within a single print to produce remarkable interlocking structures and pioneering designs that surpass conventional manufacturing. By combining high-performance materials with standard options, costs are further minimized, and material efficiency is enhanced by utilizing premium materials solely where they are essential. Dedicated Support Material Printing with support is no longer a challenge. Thanks to H2D's dual-nozzle configuration, one nozzle can be allocated specifically for support material, ensuring a secure print and an ideal support interface. Auto Arrangement Utilizing real-time images captured by the BirdsEye camera, Bambu Suite is capable of automatically organizing your project based on the configuration of your material, such as leftover plywood from a prior project. This functionality enables you to maximize the use of every material. Laser Safety Windows and Air Purifiers Our safety windows allow you to safely operate and monitor laser projects without the need for goggles. P ure air is guaranteed with an optional air purifier, even when using indoor lasers. Full-Auto Calibration and Material CodeSync Automated laser focus verification and material measurement can be started with a single tap, doing away with the need for manual changes. T he H2D automatically detects the QR code on your material, to load the ideal preset. Air Assist and Contact-less 3D Mesh Improve surface quality by directing high-speed air to cool the laser path, ensuring cleaner and more precise results. Advanced optical height measurement creates a detailed 3D mesh without physical contact, enabling precise laser work on curved surfaces. Consistently print at 600mm/s with ease The H2D’s purpose-built high-flow hotend ensures reliable, high-speed printing at 600mm/s. It eliminates mid-print flow rate restrictions and is designed for consistent performance, enabling uninterrupted high-speed printing regardless of print size or complexity. Features Multi-material printing allows for the integration of flexible, rigid, and exotic materials while using a dedicated nozzle for perfect supports with minimal waste. The system is an all-in-one solution for 3D printing, 10W laser engraving, and pen drawing. Live Spatial Alignment with the BirdsEye camera provides 0.3mm placement accuracy and automatic arrangement to reduce material waste. Safety windows allow for the operation and monitoring of laser projects without the need for goggles. An optional air purifier ensures clean air during indoor laser operations. Advanced optical height measurement creates a detailed 3D mesh for precise laser work on curved surfaces without physical contact. Air Assist improves laser cut and surface quality by directing high-speed air to cool the laser path. Full-auto laser calibration and Material CodeSync ensure the use of perfect settings for every project. A purpose-built high-flow hotend enables reliable, uninterrupted high-speed printing at 600mm/s. High-performance materials are supported by a 350°C hotend and a 65°C heated chamber. The DynaSense Extruder uses intelligent sensing for precise control, while a nozzle camera monitors for filament issues. SOTA Filament Monitoring utilizes 15 sensors to track velocity, tension, tip location, temperature, and pressure. The Vision Encoder offers ultra-fine 50µm motion accuracy and is available as a separate add-on. An AI-powered Pre-Flight Checklist performs hardware checks to ensure the machine is ready for operation. The durable aluminum and steel chassis provides a build volume of up to 325 x 320 x 325 mm3 for single nozzle printing. Standard H2D units can be upgraded with laser safety windows, air assist pumps, and laser kits.

7Semi Vikram-3025 High-Power 25A DC Motor Driver for 6–30V Motors The 7Semi Vikram-3025 is a heavy-duty single-channel DC motor driver built for demanding robotics, automation, and mechatronics projects. Designed to handle 25A continuous load with a 6V–30V operating range, it uses a high-efficiency discrete NMOS H-Bridge that eliminates the need for bulky heat sinks. Whether you're powering high-torque DC motors or creating reliable industrial controls, this driver ensures stable, smooth, and responsive performance. With built-in safety features like overcurrent protection, temperature protection, and undervoltage shutdown, your system stays secure even under heavy loads. This motor driver goes beyond basic control, it includes onboard test buttons, motor output LEDs, and a regulated 5V output for powering microcontrollers, making prototyping extremely convenient. It supports PWM/DIR control signals from a wide range of logic voltages (1.8V to 30V), ensuring compatibility with Arduino, Raspberry Pi, PLCs, and other controllers. It also offers manual control options using a potentiometer and switch, giving both beginners and advanced users flexible control in real-world applications. This makes it a dependable choice for custom robotics, high-power motor control, and automation systems. Features: Provides smooth and reliable bidirectional control for single brushed DC motors. Supports a wide operating voltage range from 6V to 30V for flexible motor compatibility. Handles a continuous motor current of 25A, ideal for high-load or high-torque applications. Includes an onboard 5V regulated output (250mA) to power a microcontroller without an external supply. Onboard test buttons and motor state LEDs allow quick, controller-free testing during prototyping. Offers dual input modes: PWM/DIR for digital control or potentiometer/switch for manual operation. Compatible with 1.8V, 3.3V, 5V, 12V, and 24V logic, making it suitable for Arduino, Raspberry Pi, PLCs, and more. Supports PWM input frequency up to 40kHz with a fixed 16kHz output for quiet motor operation. Built-in protections include active current limiting, overcurrent protection, temperature protection, and undervoltage shutdown.

HGLRC ZEUS VTX 2.5W The HGLRC ZEUS VTX 2.5W is a high-performance video transmitter engineered for FPV (First Person View) drones, delivering exceptional video clarity and long-range transmission. With a powerful 2.5W output, it ensures a strong, stable signal even in challenging environments, making it perfect for both long-distance flights and demanding racing conditions. It supports multiple frequency bands, providing flexibility and compatibility with a wide range of FPV systems. The built-in Smart Audio functionality allows pilots to easily adjust channels, bands, and power levels directly through their flight controller, ensuring quick and hassle-free configuration. Designed with efficiency and durability in mind, the ZEUS VTX features excellent heat dissipation for consistent performance during extended flights. Its compact and lightweight design makes it easy to integrate into various drone builds without adding unnecessary bulk. Ideal for competitive racing, freestyle flying, and long-range FPV enthusiasts, this VTX offers reliable performance and enhanced control for an immersive flying experience. Features: Achieves up to 9 km range in urban environments with interference (tested near a lake), and can exceed 10 km in suburban or mountainous areas. High 2500mW output power ensures strong and consistent signal transmission, ideal for long-range and ultra-long-distance flights. Offers 6 adjustable power levels: PIT / 25mW / 200mW / 800mW / 1600mW / 2500mW for flexible performance tuning. CNC-machined integrated top and bottom shell provides excellent heat dissipation, ensuring stable performance during extended use. Equipped with dual-function buttons for easy parameter adjustments, along with 3 LED indicators for quick viewing of power, band, and channel settings. Supports IRC Tramp protocol, allowing convenient OSD-based parameter configuration through the flight controller. Wide input voltage support of 2–6S (7–26V), making it compatible with various drone setups. Standard 30.5 × 30.5 mm M3 mounting holes for easy and secure installation.

Holybro PM07 Power Module (14S) The Holybro PM07 Power Module (14S) is a robust and reliable power module designed to deliver clean, regulated power to your drone’s flight controller and onboard electronics, supporting up to 14-cell LiPo battery configurations. Engineered for high-current UAV applications, this module provides accurate real-time voltage and current monitoring, helping ensure safe operation while protecting sensitive components from electrical faults. Its efficient power delivery and dependable performance make it an essential component for advanced drone builds and professional UAV platforms. Built to simplify wiring and enhance system reliability, the Holybro PM07 Power Module integrates seamlessly with popular flight controllers, reducing clutter and improving overall power management. Whether you’re developing high-performance multirotor drones, autonomous platforms, or research UAVs, this power module offers consistent energy supply, precise monitoring, and improved safety for extended flight operations, giving you confidence in both performance and durability. Please Note: The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). Features: High-capacity power module designed to support up to 14S LiPo batteries for advanced UAV applications. Delivers clean and stable power to flight controllers and onboard electronics. Provides accurate real-time voltage and current sensing for improved flight safety. Built for high-current handling in professional and heavy-lift drone platforms. Reduces wiring complexity with an integrated power and monitoring solution. Ideal for multirotor drones, autonomous UAVs, and research-grade aerial systems.