TOP3000 Universal Programmer

ST-Link/V2 Programmer and Debugger ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full-speed interface to communicate with ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments. In addition, to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms. Note: This ST-Link Programmer will not get detected in the STM32CubeIDE as they are clones. Check out our entire range of Universal Programmer Applications: Automotive Communications Equipment Computers and Peripherals IoT Applications Personal Electronics

TL866 - Universal IC Programmer The TL866II plus universal programmer is a well designed programmer of high density SMD technology, developed with an easy to use interface. TL866II plus USB programmer support 15000+ic spi flash and EEPROM 8051 MCU pic AVR gal. TL866ii plus programmer is the advanced version of TL866CS and TL866A programmer. The programming speed is much higher (up to double) of high-capacity memories as compared to TL866CS and TL866A programmers. It supports multiprogramming mode (up to four). Well-designed cheap professional programmer, Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small code -runs faster, supports bilingual (English and Chinese), it can automatically identify the operating system to install and run under win 2000/win XP/win 2003/win 2008/win vista /win7/win8/win10 (32biit/64bit). Key Features: The support simultaneously burns with 4 Programmers on each computer, the minimum volume, and the lowest power consumption, and does not feel any heat in the process. All chips do not need an external power supply, the low power consumption on its own ensures that the USB port can provide enough power. Best internal 40 pins over-voltage protection, the strongest VCC/app 4-level over current protection. The short circuit does not reset the pc. Wide range of chip 15000+ support, support for serial and parallel series 40/44/48pin large capacity flash. Unique serial icsp interface, supporting the serial download and high-speed parallel high voltage programming, test cmos4000 74/54 series integrated circuit, can be located in the gate circuit error, chip auto serial number is the most complete and practical. Original chip encryption operation on AVR microcontroller with internal RC Calibration byte, the decrypt software cannot be directly run on another same type of chip. Also check the HIPG854 Universal Programmer available on the Iotcart website, it is currently sold out. The universal programmer supports a wide range of devices, including ATMEL, AVR, PIC, EPROM, EEPROM, and many more ICs Features: Wide Compatibility: Supports programming for over 14,000 different devices, including EPROMs, EEPROMs, SPI FLASHs, DataFlash, and various microcontrollers. High-Speed Programming: Equipped with a high-performance MCU and USB interface, offering fast programming speeds. ICSP Port: Includes an In-Circuit Serial Programming (ICSP) port, allowing it to replace or eliminate the need for other programmers like Microchip PICkit or Atmel AVRISP. User-Friendly Interface: Designed with an easy-to-use interface, making it accessible for both beginners and professionals. Compact and Portable: Small and lightweight, making it easy to carry and use in various settings. Logic IC Testing: Can test the operation of logic ICs (CMOS and TTL), DRAMs, and SRAMs. Applications: Microcontroller Programming: Used for programming a wide range of microcontrollers from various manufacturers. EPROM and EEPROM Programming: Suitable for programming EPROMs and EEPROMs, which are used in many electronic devices. Flash Memory Programming: Can program SPI FLASH, DataFlash, and other types of flash memory. Logic IC Testing: Capable of testing the operation of logic ICs (CMOS and TTL), DRAMs, and SRAMs. In-Circuit Serial Programming (ICSP): Allows for in-circuit programming of microcontrollers, eliminating the need for separate programmers like Microchip PICkit or Atmel AVRISP. Development and Prototyping: Ideal for use in development and prototyping environments where multiple types of ICs need to be programmed.

Universal Programmer TOP2013 The TOP2013 is a universal programmer from Seeit. The TOP2013 is designed to work with components with up to 32 pin, from a range of manufacturers. These components include EPROMs, EEPROMs and FLASH memories. A full list of compatible devices can be found on the product datasheet. The Top2013 Universal programmer featuring an ARM Cortex 32 core and is housed in a compact package. It also offers low-power loss and overcurrent protection. Simply plug the TOP2013 into a PC via USB cable. The TOP2013 automatically starts programming once it detects a device has been inserted correctly into the ZIF40 socket. Features of TOP2013 Universal Programmer Model TOP2013 Universal Programmer Dimensions 11.5 x 9 x 2.5 cm Weight 250g Power < 2.5w (5v/500mA) Pins 40-pin Universal locking socket Operating System WINDOWS XP / WIN7 / WIN8 / WIN10 Transmission Speed 12MHz/s

HIPG854 Universal Programmer The HIPG854 Universal programmer is good economical universal programmer that supports wide range of ATMEL,AVR,PIC,EPROM,EEPROM many more ICS. Universal programmers are used for programming a wide variety of devices without requiring family-specific modules and are suited to development projects and low volume production programming. The HIPG854 Universal programmer comes with a USB cable for easy usage. Features of the HIPG854 Universal programmer Model HIPG854 Universal programmer Supports ATMEL,AVR,PIC,EPROM,EEPROM many more ICS Dimensions 10 x 8 x 8 cm Weight 75 grams

ELECROW ZigStar UZG-01 Universal Zigbee 3.x Gateway with PoE Introducing the UZG-01 LAN/PoE WiFi USB ZigBee 3.x Coordinator, a revamped version of the highly popular ZigStar LAN Gateway. The key upgrade is its onboard PoE (Power over Ethernet) support, along with the new CC2652P7 chip, capable of managing up to 300 ZigBee devices. It also comes in an aesthetically designed enclosure. Powered by the robust CC2652P TI chip, which boasts a +20dB range, this device functions as a ZigBee Coordinator/Router in a variety of smart home setups, including Zigbee2MQTT, Home Assistant (ZHA), ioBroker, and more. It arrives pre-flashed with the latest Z-Stack 3.x firmware and features three LED indicators for easy status monitoring. Features Flexible Power Options: Can be powered via PoE or USB-C, with both PoE and USB-C working simultaneously, featuring optoelectronic isolation. Advanced CC2652P7 TI Chip: The most powerful chip (+20dB) supporting up to 300 ZigBee devices. Three Operating Modes: Choose between LAN/WiFi or USB Coordinator/Router modes. Status Indication: Three LED indicators for device status. Seamless Communication: Works via USB, LAN, or WiFi with Zigbee2MQTT (Z2M) and ZHA. External Antenna Support: SMA port for connecting an external antenna. User-Friendly Programming: Easy setup with the ZigStar Multi Tool—no external programmer required. Compact and Stylish Design: Fits easily into any space. Effortless Updates: ZigBee and ESP firmware updates with just a few clicks. Quality Assurance: Each device is individually tested before shipment.

RT809F Serial ISP Programmer Standard Configuration with Repair Tool The RT809F Serial ISP Programmer Standard Configuration is a high-performance and versatile in-system programming tool designed for flashing, repairing, and debugging a wide range of microcontrollers, EEPROMs, Flash ICs, and BIOS chips. It supports popular chip families such as AVR, 8051, PIC, DDR SPD, SPI Flash, LCD EDID chips, and many more - making it one of the most comprehensive universal programmers for embedded development and electronics repair. With high-speed USB2.0 communication, FPGA-based control, and wide compatibility across Windows platforms, the RT809F is an essential tool for developers, laptop repair engineers, TV technicians, and embedded system designers. Built for reliable everyday use, the programmer features anti-static protection, secure IC locking, fast read/write performance, and support for in-circuit programming (ISP) without removing chips from the board. Whether you're updating BIOS firmware, repairing laptop motherboards, reading/writing SPD memory, extracting EEPROM data, or flashing microcontrollers directly, the RT809F provides accuracy, stability, and professional-grade functionality in a compact and easy-to-use design. Features: Supports a wide range of devices, including computer motherboards, laptops, LCD TVs, routers, and embedded chips. Compatible with DDR1/DDR2/DDR3 SPD memory, notebook password chips, battery management chips, and various EEPROMs. Full support for I²C bus (24 series), SPI Flash (25/26 series), and MicroWire 93 series memory chips. Exclusive support for RTD2120 dual-BANK online read/write functionality. Reads/writes LCD monitor and TV DDC-EDID data online, including laptop screen EDID programming. Ideal for AVR and 8051 ISP programming, tested with AVRDude and multiple OS platforms. Uses USB2.0 for power and communication, no external adapter needed. FPGA-based control allows firmware updates through software for extended chip support. Features anti-static and port I/O protection, ensuring reliability during sensitive operations. Easy-to-use interface suitable for both beginners and professionals. Provides high-speed programming and stable data transfer, reducing flashing time drastically. Compact, durable design suitable for lab benches and field repair work.