8CH USB Logic Analyzer This is a very affordable 24Mhz 8 Channel USB Logic analyzer. This is a hobbyist level analyzer, ideal for testing your Arduino or other hobbyist microcontroller’s communications. A logic analyzer is a must have tool for any serious electronics hobbyist. With a logic analyzer, it is possible to see a visual representation of the zeros and ones that are flashing between two components. A logic analyzer is different from an oscilloscope because the analyzer allows you to capture the data on a PC for a more detailed analysis of the data which is being transmitted and received. This logic analyzer supports 10 different communications standards (see Specifications below). with 8 channels it will allow you to monitor up to 8 different wires. So on an Arduino, you could monitor the Serial port (tx/Rx pins), the I2C port (pins A4, A5), and the SPI port (pins 10, 11, 12, and 13) all at the same time. If you do single-chip development, ARM system development or FPGA development then we strongly recommend you buy this product. To do a good job, must first sharpen his device MCU related products, as long as you do this tool will be your crescent moon nod. Especially do UART, SPI, and IIC communication debugging, which absolutely let you get twice the result with half the effort. read more : What is a Logic Analyzer Package Includes: 1 x 8CH USB Logic Analyzer Specifications: Input Supply Voltage (VDC) 0 ~ 5.5 Threshold Voltage (V) 1.5 Dupont Cable Length (cm) 20 USB Cable Length (cm) 50 Dimensions 54 x 27 x14 Weight (gm) 55

AC8265 Wireless NIC for Jetson Nano This is an AC8265 Wireless NIC for Jetson Nano, WiFi / Bluetooth. The module is used to receive signals through NIC. NIC allows both wired and wireless communications. NIC allows communications between computers connected via a local area network (LAN) as well as communications over the large-scale network through Internet Protocol (IP). This module contains two antennas that are used to attract the signals. This is a dual-mode wireless NIC module applicable for Jetson Nano, which supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. How to connect the Wireless NIC to the NVIDIA Jetson Nano? Remove the two screws on Jetson Nano, and detach the jetson nano. Connect the extension cable to wireless AC8265 on the IPEX connector and tighten the nuts. Remove the NIC screw onboard, and insert the wireless AC8265 into the socket. Insert the jetson nano into the socket and screw it again.

ARM Cortex-M0 STM32F051C8T6 STM32 Core Board Minimum Development Board Check out our newest product, the Cortex-M0 STM32F051C8T6 ARM Core Board Development Board. It's created for everyone who appreciates making art, regardless of level of experience. This board features a strong Cortex-M0 processor, enough of storage capacity, and a steady clock to keep everything going smoothly. It's ideal for creating devices, testing out new ideas, and learning about electronics. The SWD debug download tool allows you to easily resolve any issues with your projects and requires only a Mini-USB cord to get started. Made by FlyNoval, you can be confident that it will work every time. Begin your adventure into interesting projects with the Cortex-M0 STM32F051C8T6 ARM Core Board, currently available at Iotcart. Let your creativity fly! Package Includes: 1 x ARM Cortex-M0 STM32F051C8T6 STM32 Core Board Minimum Development Board Specifications: Core Cortex-M0 (32-bit) Storage Resources 64K Flash, 8KB SRAM External Crystal 8MHz Debug Download Interface SWD Board Power Supply Mini-USB (DC-5V) Brand FlyNoval RAM Memory Installed Size 8 MB Connectivity Technology USB Wireless Communication Standard Bluetooth RAM Memory Technology SRAM

ATTINY85 USB Development Board The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (of course a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this ATTINY85 USB Development Board is a great way to jump into microcontroller electronics. ATtiny85 based microcontroller development board comes with a USB interface. Coding is similar to Arduino, and it uses the familiar Arduino IDE for development.  It has 6 ports with several functions. Depending on the programming (with Arduino IDE) can it have 6 digital I/O, 4 analog inputs, or 3 PWM outputs. It can be powered by a USB port or an external power supply of 6-35V DC. Also check PCI Port Cord Motherboard IC Analyser available on Iotcart. Priced at Rs. 585 with a discounted price of Rs. 311, it offers a 47% off deal. The PCI diagnostic card is designed for notebook repairs, featuring LED displays for motherboard diagnosis and the ability to process Mini PCI, Mini PCI E, and LPC signals. PACKAGE INCLUDES: 1 x ATTINY85 USB Development Board SPECIFICATIONS: No.of I/O Pins 6  Memory 8 k Flash Memory (about 6 k after bootloader) Dimensions(LxWxH) 26x18x5mm Weight 10gm

BBC Micro:Bit Go Get creative, get connected & get coding with the micro:bit go. A complete set containing all the parts and inspirational ideas to get started with the micro:bit. Each micro:bit go contains 1x micro:bit, USB cable, battery holder & 2x AAA batteries along with a Quick Start Guide featuring 4 fun ideas all in a retail ready pack. The micro:bit go is the quickest and easiest way for children to get going with the micro:bit. The Micro:Bit is a pocket-sized computer that you can code, customize and control to bring your digital ideas, games, and apps to life. Measuring 4cm by 5cm, and designed to be fun and easy to use, users can create anything from games and animations to scrolling stories at school, at home and on the go - all you need is imagination and creativity. The Micro:Bit is completely programmable. That means each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer and Bluetooth Technology. Key features include Bluetooth 4.0 3-axis motion sensor Magnetometer Temperature Light Sensor 2x programmable buttons 25 pins Can be programmed using C++, MakeCode, Python, Scratch Micro:Bit on-board Pinout Micro:Bit Tech specs Model BBC Micro:Bit Go Microprocessor 32-bit ARM Cortex M0 CPU System push button switch  X 1 LED Matrix  5×5 LED matrix Edge connector 20 pins USB-A to Micro-USB cable 6 inch Cable Dimension (approx) 17x10x2.5cms Weight 120 grams   Useful Links Micro:Bit Step Counter Example Code https://github.com/Iotcart/Microbit-Examples/tree/main/Microbit%20step%20counter

BBC Micro:Bit Silicone Soft Cover Protective Case This fancy and cute case has been specially designed to protect your Micro:Bit from damage and external wear and tear. It gives you full access to bottom pins, A B buttons, USB ports and any other connectors. Made of soft silicone, it provides a soft texture and is completely scratch-resistant. It is available in 5 colors: Orange, Yellow, Blue, Light Blue and Red. The Mirco:Bit case  is a protective enclosure that gives you full access to bottom pins, A B buttons, USB ports and any other connectors. (Micro:bit not Included) Soft silicone material case that provides a smooth texture. Scratch-resistant cover that protects your Micro:bit Board from external wear and tear. The holes on the cover align perfectly against the Display LED, and the sleeve protects the gold finger edge connector of Micro:Bit Cute colourful sleeves that not only protect your Micro:Bit, but also gives it a trendy and sassy look, creating an interesting programming environment. Devices like Micro Bit BBC SBC and Microbit Go are compatible. Package Includes: 1 x blue Micro:Bit Silicone Soft Cover Protective Case Features of BBC Micro:Bit Silicone Soft Cover Protective Case Model BBC Micro:Bit Silicone Soft Cover Protective Case Colour Blue Product Dimension 56*45*12mm Weight 12 grams Scratch Resistant  Yes

BBC Micro: Bit Silicone Soft Cover Protective Case (Light Blue) This fancy and cute case has been specially designed to protect your Micro: Bit from damage and external wear and tear. It gives you full access to bottom pins, A B buttons, USB ports and any other connectors. Made of soft silicone, it provides a soft texture and is completely scratch-resistant. It is available in 5 colors: Orange, Yellow, Blue, Light Blue and Red. The Mirco:Bit case is a protective enclosure that gives you full access to bottom pins, A B buttons, USB ports and any other connectors. (Micro:bit not Included) Soft silicone material case that provides a smooth texture. Scratch-resistant cover that protects your Micro:bit Board from external wear and tear. The holes on the cover align perfectly against the Display LED, and the sleeve protects the gold finger edge connector of Micro:Bit Cute colourful sleeves that not only protect your Micro:Bit, but also gives it a trendy and sassy look, creating an interesting programming environment. Devices like Micro Bit BBC SBC and Microbit Go are compatible. Package Includes: 1 x Light Blue BBC Micro:Bit Silicone Soft Cover Protective Case Specifications: Model BBC Micro:Bit Silicone Soft Cover Protective Case Colour Light Blue Product Dimension 56*45*12mm Weight 12 grams Scratch Resistant  Yes

BBC Micro:Bit Silicone Soft Cover Protective Case This fancy and cute case has been specially designed to protect your Micro:Bit from damage and external wear and tear. It gives you full access to bottom pins, A B buttons, USB ports and any other connectors. Made of soft silicone, it provides a soft texture and is completely scratch-resistant. It is available in 5 colors: Orange, Yellow, Blue, Light Blue and Red. The Mirco:Bit case  is a protective enclosure that gives you full access to bottom pins, A B buttons, USB ports and any other connectors. (Micro:bit not Included) Soft silicone material case that provides a smooth texture. Scratch-resistant cover that protects your Micro:bit Board from external wear and tear. The holes on the cover align perfectly against the Display LED, and the sleeve protects the gold finger edge connector of Micro:Bit Cute colourful sleeves that not only protect your Micro:Bit, but also gives it a trendy and sassy look, creating an interesting programming environment. Devices like Micro Bit BBC SBC and Microbit Go are compatible. Package Includes: 1 x Orange BBC Micro:Bit Silicone Soft Cover Protective Case Features of BBC Micro:Bit Silicone Soft Cover Protective Case Model BBC Micro:Bit Silicone Soft Cover Protective Case Colour Orange Product Dimension 56*45*12mm Weight 12 grams Scratch Resistant  Yes

BBC Micro:Bit Silicone Soft Cover Protective Case Red This fancy and cute Micro:Bit Silicone Soft Cover Protective Case has been specially designed to protect your Micro:Bit from damage and external wear and tear. It gives you full access to bottom pins, A B buttons, USB ports and any other connectors. Made of soft silicone, it provides a soft texture and is completely scratch-resistant. It is available in 5 colors: Orange, Yellow, Blue, Light Blue and Red. The Mirco:Bit case is a protective enclosure that gives you full access to bottom pins, A B buttons, USB ports and any other connectors. (Micro:bit not Included) Soft silicone material case that provides a smooth texture. Scratch-resistant cover that protects your Micro:bit Board from external wear and tear. The holes on the cover align perfectly against the Display LED, and the sleeve protects the gold finger edge connector of Micro:Bit Cute colourful sleeves that not only protect your Micro:Bit, but also gives it a trendy and sassy look, creating an interesting programming environment. Devices like Micro Bit BBC SBC and Microbit Go are compatible. Package Includes: 1 x Red BBC Micro:Bit Silicone Soft Cover Protective Case Specifications: Model BBC Micro:Bit Silicone Soft Cover Protective Case Colour Red  Product Dimension 56*45*12mm Weight 12 grams Scratch Resistant  Yes

BBC Micro:Bit Silicone Soft Cover Protective Case (Yellow) This fancy and cute case has been specially designed to protect your Micro:Bit from damage and external wear and tear. It gives you full access to bottom pins, A B buttons, USB ports and any other connectors. Made of soft silicone, it provides a soft texture and is completely scratch-resistant. It is available in 5 colors: Orange, Yellow, Blue, Light Blue and Red. The Mirco:Bit case is a protective enclosure that gives you full access to bottom pins, A B buttons, USB ports and any other connectors. (Micro:bit not Included) Soft silicone material case that provides a smooth texture. Scratch-resistant cover that protects your Micro:bit Board from external wear and tear. The holes on the cover align perfectly against the Display LED, and the sleeve protects the gold finger edge connector of Micro:Bit Cute colourful sleeves that not only protect your Micro:Bit, but also gives it a trendy and sassy look, creating an interesting programming environment. Devices like Micro Bit BBC SBC and Microbit Go are compatible. Package Includes: 1 x Yellow BBC Micro:Bit Silicone Soft Cover Protective Case Features of BBC Micro:Bit Silicone Soft Cover Protective Case Model BBC Micro:Bit Silicone Soft Cover Protective Case Colour Yellow Product Dimension 56*45*12mm Weight 12 grams Scratch Resistant  Yes