ADS1263 32-bit ADC Module with PGA Breakout - 7Semi The 7Semi ADS1263 32-bit ADC Module with PGA Breakout is a high-accuracy data acquisition solution built around the Texas Instruments ADS1262 chip. Designed for demanding applications like weigh scales, RTDs, thermocouples, and strain-gauge sensors, this module delivers ultra-low noise and minimal drift for reliable performance. It features a built-in Programmable Gain Amplifier (PGA), onboard voltage reference, and dual sensor excitation currents for precision in direct RTD measurements. With a wide range of data rates (2.5 to 38,400 SPS), a 24-bit auxiliary ADC for background tasks, and a single-cycle settling digital filter, it’s ready to handle both fast and highly sensitive measurements. Fault monitoring and flexible interface options make this breakout ideal for industrial and lab-grade applications where accuracy matters most.

AMS1117 3.3V Power Supply Module The AMS1117 3.3V Power Supply Module is convenient to use voltage regulator with high safety performance and multiple power expansion interfaces. The module is suitable for electronic devices such as SCM project design that needs a 3.3V power supply. It is a simple Dual-panel design and the Input-output uses the 2 Pin single row pin for easy connection. This power supply module features an Onboard AMS1117 chip, and an Onboard power indicator to indicate power is turned on (Red LED). Specially designed two-pin mounting holes can be directly fixed on the whole expansion board for experiments. Features Onboard AMS1117 chip. Onboard power indicator to indicate power is turned on: Red LED. Output voltage interface, connection to facilitate the experimental. Specially designed two pin mounting holes, can be directly fixed on the whole expansion board for experiments. Small Compact Size, 4Pin Type, Breadboard Friendly. 2P single row pin input and output for easy connection Dual-panel design, the layout is nice Applications: Power Management for Computer Mother Board, Graphic Card. Power Management for LCD Monitor and LCD TV.

AMS1117 5V Step-Down Power Supply Module This Step-Down power supply module ( buck converter ) utilizes the AMS1117 5V regulator to regulate input voltage in the range of 6.0 to 12V down to a fixed 5V output at a maximum of 1A. The input and output terminals of the module can be connected through standard 0.1" header pins, which are thoughtfully positioned to enable face-down insertion into a standard. NOTE: Do not exceed absolute maximum input voltage (12.5v) or output current. Exceeding maximum specifications can result in permanent damage to this module or any connected devices. The jumper connector is not soldered. Features Onboard AMS1117 chip. Onboard power indicator to indicate power is turned on: Red LED. Output voltage interface, connection to facilitate the experimental. Small Compact Size, 4Pin Type, Breadboard Friendly. 2P single row pin input and output for easy connection Dual-panel design, the layout is nice

Decimilia Duemilanove Board The Decimilia Duemilanove Board compatible with Arduino based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. Decimilia Duemilanove Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Due AT91SAM3X8E ARM Cortex-M3 The Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. The Due Arduino AT91SAM3X8E ARM Cortex-M3 Board is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Key Features: The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The SAM3X has 512KB (2 blocks of 256KB) of flash memory for storing code. The bootloader is pre-burned in a factory from Atmel and is stored in a dedicated ROM memory. The available SRAM is 96KB in two contiguous banks of 64KB and 32KB. All the available memory (Flash, RAM, and ROM) can be accessed directly as a flat addressing space. It is possible to erase the Flash memory of the SAM3X with the onboard erase button. This will remove the currently loaded sketch from the MCU. To erase, press and hold the Erase button for a few seconds while the board is powered. Due follows the 1.0 pinout: TWI: SDA and SCL pins that are near to the AREF pin. The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V. An unconnected pin, reserved for future use Note: Unlike other Arduino boards, the Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board.

Arduino Leonardo R3 Board Compatible with Arduino The Leonardo R3 Board Micro-USB Arduino Compatible is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (seven PWM outputs and twelve analogue inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. The Leonardo R3 board includes everything needed to support the microcontroller; simply connect it to a computer via USB or power it via an AC-to-DC adapter or battery to get started. The Leonardo R3 Board differs from all previous boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard; in addition to a virtual (CDC) serial / COM port. It also has other ramifications for the board's behavior. Arduino Leonardo Pinout Also check Keyes MOS Driving Module . It is a breakout board for the IRF520 MOSFET transistor. It is designed to allow you to control high-power DC loads from a microcontroller. You can use it to control things like LEDs, DC motors, and solenoid valves.

LilyPad ATmega328P Board compatible with Arduino The LilyPad 328 ATmega328P Main Board 16M is a compatible Arduino-program micro-controller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package design to minimize snagging and profile. With wide tabs that can be sewn down and connect with conductive thread. The LilyPad consists of an ATmega328 compatible with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This Lilypad board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch). Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. These boards are washable as well.

Arduino MEGA 2560 Atmel R3 Board compatible with Arduino The Arduino Mega 2560 R3 is an open-source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip. The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allows the shields to adapt to the voltage provided from the board. The other is not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. This Board has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with a DC adapter or battery to get started. The Mega 2560 R3 board is compatible with most shields designed for Arduino/Genuino Uno and the former boards Duemilanove or Diecimila. Check out Affordable Arduino UNO R3 for beginners & experts. Also check Arduino MEGA Prototype Shield V3 . Key Features: Features the microcontroller ATmega2560. 54 digital I/O pins are included (15 PWM outputs). Four UARTs and sixteen analog inputs allow for smooth connection. Allows for modern Arduino/Genuino Uno shields. Perfect for projects requiring a large amount of I/O capability and prototyping. Includes an ICSP header, reset button, USB connectivity, and crystal oscillator operating at 16 MHz.

MEGA 2560 Atmel R3 Board compatible with Arduino The Arduino Mega 2560 R3 is an open-source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip. The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allows the shields to adapt to the voltage provided from the board. The other is not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. This Board has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with a DC adapter or battery to get started. The Mega 2560 R3 board is compatible with most shields designed for Arduino/Genuino Uno and the former boards Duemilanove or Diecimila.

Arduino MEGA 2560 CH340 R3 Compatible Board The Arduino MEGA 2560 R3 feature-packed development board is a dream come true for electronics enthusiasts and creators. It comes with top-notch quality and assurance. This Arduino mega microcontroller Board is a true powerhouse, equipped with 54 digital I/O pins and 16 analog input pins. It caters to all age groups and skill levels, encouraging skill development as you experiment and innovate. It's an ideal choice for a spectrum of applications, from robotics to automation and IoT projects. The AT Mega2560 Arduino R3 board is an Android Accessory Development Kit (ADK) that can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or a battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack. The Arduino Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board. It's engineered to solve a wide range of user applications. This makes it a must-have for makers, students, and professionals alike. If you're someone who values quality and versatility in your electronics projects, the Arduino MEGA 2560 R3 Board is an indispensable tool. New Features of the Arduino Mega2560 R3 Board Features a 1.0 pinout with added SDA and SCL pins near the AREF pin. Features two new pins located near the RESET pin. It allow mega2560 shields to adapt to the voltage provided by the board. The At Mega2560 development board also features a stronger RESET circuit. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Applications: Building robotic projects. Creating automation systems for home or industrial use. Perfect for Internet of Things (IoT) applications. Capable of gathering data from sensors and input devices. Excellent for prototyping electronic projects. A valuable tool for teaching electronics, programming, and engineering concepts. Controlling lights, appliances, and security devices.