Mega 2560 Pro CH340G ATmega2560 Board The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560. The Mega 2560 is an excellent solution for building exciting projects based on ATmega2560. The Mega Pro Embed functionalities are identical to the Arduino Mega 2560. Even though it is an Embed board, it is solid and stable as the Mega Board. It uses the original chip, and a 16 MHz high-quality quartz resonator is present on the board. atmega2560 board has a Micro USB connector that allows you to connect the microcontroller to the computer via the USB-UART adapter CH340 and may require an installation driver. You can power the Mega 2560 Pro or power the pins through the MicroUSB connector. The voltage regulator (LDO) can handle input voltages from 6V to 9V (peak 18V) DC. The voltage regulator allows to use up to 18V as an input value, however, we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device. Key Features: Based on the ATmega2560. Equipped with a 16 MHz quartz resonator. Integrated CH340 adapter for easy USB connectivity. Fully compatible with the Arduino Mega 2560. Supporting input voltages from 6V to 9V (up to 18V peak). Comes with 20-pin headers for easy prototyping. Features a built-in voltage regulator (LDO). Applications : IoT Projects Home automation Agriculture automation

MEGA 2560 R3 Board compatible with Arduino The MEGA 2560 R3 CH340G Board MEGA 2560 R3 Board compatible with Arduino is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android-based phones, based on the MAX3421e IC. The ATMega2560 has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is based on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to the ground, making it easier to put into DFU(Device Firmware Upgrade) mode. New Features of the Mega2560 R3 Board The Mega2560 R3 board features a 1.0 pinout with an added SDA and SCL pins near the AREF pin. It also features two new pins located near the RESET pin. They allow mega2560 shields to adapt to the voltage provided by the board. The At Mega2560 development board also features a stronger RESET circuit. The AT Mega2560 Arduino R3 board is an Android Accessory Development Kit (ADK) that can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board.

Arduino Mega 2560+WiFi R3 ATmega2560+Node MCU ESP8266 CH340G Board Compatible with Arduino Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 is a customized version of the Arduino Mega R3 board with full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently. Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible with Arduino Mega is Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb. All of the modules can work together or separately. And everyone has their pinout headers. The convenient solution for the development of new projects requiring Uno and WiFi. Via USB you can update sketches and firmware for ATmega328 and ESP8266. Switch status and model selection: Connection/Switch No. 1 2 3 4 5 6 7 8 CH340 connect to ESP8266 (upload sketch) OFF OFF OFF OFF ON ON ON NoUSE CH340 connect to ESP8266 (connect) OFF OFF OFF OFF ON ON OFF NoUSE CH340 connect to ATmega2560 (upload sketch) OFF OFF ON ON OFF OFF OFF NoUSE CH340 connect to Mega2560 COM3 connect to ESP8266 ON ON ON ON OFF OFF OFF NoUSE Mega2560+ESP8266 ON ON OFF OFF OFF OFF OFF NoUSE All modules work independently OFF OFF OFF OFF OFF OFF OFF NoUSE Also, have the switch to change of connecting port between ATmega2560 and ESP8266After choosing the mode of the board can proceed to set up the IDEIt is important that when the ESP8266 module is programming, it is necessary to press the button Mode Applications: IoT smart applications Wi-Fi-based applications Robotics applications Can be used to enable internet connectivity to embedded applications

Nano Board R3 compatible with Arduino The Nano board R3 is integrated with the CH340 chip and is compatible with Arduino. Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. The Nano R3 board for Arduino is a small and breadboard friendly microcontroller development board. This Nano Arduino board is designed based on ATmega328 and has similar functionality of the UNO board. It features automatic reset during program download and supports ISP download, power supply by 9V battery, and external 5V ~ 12V DC power supply. Applications: Automation Robotics Control Systems Embedded Computer Embedded Computer

Arduino Nano R3 Compatible Board with CH340 Chip The Arduino Nano R3 board is a compact, feature-rich microcontroller development board that offers outstanding performance, suitable for all ages. This incredible board features 14 digital pins, opening up a world of possibilities for your robotics and DIY projects. This Mini Arduino development board is designed to encourage skill development, making it perfect for students and enthusiasts of all age ranges. One of the standout features of the Arduino Nano Board is its advanced CH340 chip. This chip enhances the board's performance, making it an excellent fit for various electronics projects, including automation, control systems, and embedded computing. The Arduino Nano R3 Compatible Board with CH340 Chip is constructed with high-quality materials, ensuring its reliability even in challenging conditions. If you're a DIY enthusiast, this board is your best companion. It offers a wide range of applications, making it perfect for hobbyists and professionals alike. Note: Users need to download CH341S64.SYS driver and use it with old bootloader settings in the Arduino IDE. Grab your Arduino UNO R3 at the best deal! Key Features: Microcontroller board compatible with Arduino. Enhances performance for smooth operation and reliability. Provides ample connectivity options for robotics and DIY projects. Suitable for automation, control systems, and embedded computing projects. User-friendly interface and compatibility with Arduino IDE. Compatible with a wide range of sensors, actuators, and shields. Applications: Automation Robotics Control Systems Embedded Computer Embedded Computer

Arduino Nano R3 Development Board Compatible with Arduino The CH340 Soldered Arduino Nano Board R3 chipboard is based on the famous Arduino platform and does all the functions of Uno but with a smaller footprint. The Nano board compatible with Arduino equips a low-cost USB-Serial Chip that makes it reliable and suitable for projects based around Arduino . The Arduino Nano WiFi microcontroller board for IoT & home automation is a small, complete, and breadboard-friendly board based on the ATmega328. The CH340 Arduino Nano Atmega328 microcontroller board can be powered via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected as the highest voltage source. The size of Arduino Nano V3.0 with CH340 Chip is only 43 mm x 18 mm. It comes with 6 PWM I/O from a total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed, and 32kB of flash memory. read more: Node to Node communication on LoRa with Arduino Nano and ESP32 Best price guarantee on Arduino UNO R3 microcontroller ! Note: The user needs to download CH341S64.SYS driver and use it with old bootloader settings in the Arduino IDE. Key Features: Based on the Arduino platform, compatible with Arduino Uno but with a smaller footprint. Equipped with a CH340 USB-Serial Chip for reliability. Powered via mini-USB connection, 6-20V unregulated external power supply, or 5V regulated external power supply. Features 6 PWM I/O and 22 digital I/O pins. Provides 8 analog inputs. Operates at a clock speed of 16MHz with 32KB flash memory. Supports node-to-node communication on LoRa with Nano and ESP32. Requires downloading CH341S64.SYS driver and using old bootloader settings in Arduino IDE. Compatible with Nano 328P Expansion Adapter Breakout Board IO Shield for expanded access to pins. check out: Arduino Nano BLE Sense (Rev-2) with Headers Also, check the Nano 328P Expansion Adapter Breakout Board read more: Sending data from Arduino nano to Raspberry Pi using lora communication

Pro Micro 5V 16M compatible with Arduino This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC. The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits

Pro Mini ATMEGA328P Are you a passionate DIY enthusiast or an aspiring inventor? Look no further! The Arduino Pro Mini 3.3V/8MHz ATMEGA328P Board is your gateway to endless possibilities. This compact and powerful microcontroller board is designed to bring your creative ideas to life. The Arduino Pro Mini features an ATmega328 microcontroller that provides 14 digital input/output pins, 6 PWM ports, and 6 analog inputs. Its 8MHz bootloader ensures smooth and efficient operation. Measuring just 5 x 3 x 2cms, this board is perfect for projects where space is limited. Its small size makes it ideal for embedding into objects or exhibitions seamlessly. Are you looking for a board that offers exceptional performance and connectivity options? The Arduino Pro Mini 3.3V/8MHz ATMEGA328P Board has got you covered!* With a 3.3V circuit operating voltage and an 8MHz clock frequency, this board ensures stable and efficient performance for your projects. The Pro Mini comes equipped with 6 PWM ports (D3, D5, D6, D9, D10, and D11) that allow you to control motors, servos, and other devices precisely. The onboard resonator and reset button make it easy to connect and program the board without any hassle. The Arduino Pro Mini 3.3V/8MHz ATMEGA328P Board is not just a microcontroller; it's a gateway to a world of possibilities. From robotics and automation to IoT projects and sensor applications, this board is suitable for a wide range of projects. Pair this board with our 5-in-1 Sensor Kit for Arduino , and you'll have access to an array of sensors to take your projects to the next level. Join Our Global Community Be a part of the growing global community of makers and innovators who have chosen Iotcart as their go-to destination for DIY electronics. With our vast selection of compatible boards, sensors, and accessories, you'll find everything you need to bring your ideas to life. Best Price, Free Shipping, and COD At Iotcart, we understand the value of your time and money. That's why we offer the best price guarantee, ensuring you get the most value for your investment. Plus, enjoy the convenience of free shipping on orders above Rs 500/- and Cash on Delivery (COD) option for hassle-free payment. Secure, Swift, and Supportive Our dedicated technical support team is always at your service to assist you in your DIY journey. We take pride in delivering genuine products worldwide with the utmost care and security, ensuring you have a smooth and delightful shopping experience. Features: Microcontroller: ATmega328P running at 8MHz. Operating Voltage: 3.3V. Digital I/O Pins: 14 (6 can be used as PWM outputs). Analog Input Pins: 6. UART: 1 hardware serial port. On-board Resonator: Provides stable clock signals. Reset Button: For easy resetting of the board. Compact Size: Ideal for projects where space is limited. Low Power Consumption: Suitable for battery-powered devices and remote sensors. Applications: Wearable Electronics: Ideal for creating compact, low-power wearable devices. Remote Sensors: Suitable for battery-powered remote sensing applications due to their low power consumption. IoT Projects: Frequently used in Internet of Things (IoT) projects for connecting various sensors and modules. Prototyping: Great for prototyping new electronic devices and systems. Educational Projects: Used in educational settings to teach microcontroller programming and electronics. Robotics: Can be integrated into small robots and automation systems. Home Automation: Useful for creating custom home automation solutions

5V 16MHz Pro Mini ATMEGA328P Looking to dive into the exciting world of DIY electronics and automation? Our Arduino Pro Mini 5V/16MHz/ATMEGA328P Compatible board is here to be your perfect companion. Designed to be compact and powerful, this microcontroller board opens up a world of possibilities for your creative projects. The Arduino Pro Mini comes equipped with 14 digital input/output pins, allowing you to connect various sensors, actuators, and peripherals effortlessly. What's more, 6 of these pins can be used as PWM outputs, granting you precise control over motors and LEDs. With 8 analog input pins, you can capture real-world data and create interactive projects like never before. Running on a 16MHz bootloader, this board ensures speedy and efficient operation, handling complex tasks with ease. Whether you're a seasoned maker or a budding enthusiast, this microcontroller will elevate your projects to new heights. Compact and lightweight, the Arduino Pro Mini is perfect for integrating into your projects without adding bulk. Ideal for semi-permanent installations, exhibitions, and innovative prototypes, it offers the freedom to create without limitations. Join Our Global Community Be a part of the growing global community of makers and innovators who have chosen Iotcart as their go-to destination for DIY electronics. With our vast selection of compatible boards, sensors, and accessories, you'll find everything you need to bring your ideas to life. Secure, Swift, and Supportive Our dedicated technical support team is always at your service to assist you in your DIY journey. We take pride in delivering genuine products worldwide with the utmost care and security, ensuring you have a smooth and delightful shopping experience. Note : Pro Mini ATMEGA328P come without connectors. We recommend the first time Arduino users start with the Uno R3. There is two versions of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz. To buy 3.3V/8MHz Pro Mini click on the name below: Pro Mini ATMEGA328P 3.3V/8MHz with Connector 5V 16MHz Pro Mini ATMEGA328P without connectors Arduino Pro Mini Pinout

UNO Prototyping Shield for Arduino UNO Prototype Shield is used in the cases where you want to build more applications without using any external Breadboard. This prototyping shield for Arduino helps in expanding the functionalities of UNO board and create extra connections for embedded system projects.