Pure Copper 1 Meter Length Cable with Dupont Connector for NEMA17 Stepper Motor (1 Meter) The Pure Copper 1000mm Length Cable with Dupont Connector is a  Replacement cable for NEMA17 Stepper Motor. The conductors of this 1 meter Cable with Connector for NEMA17 Stepper Motor consist of pure copper. It has an overall length of 1000 mm which is very convenient to install your stepper motor systematically in your projects or 3D printers etc. It equips 6 pin JST XH connector at one end and 4 pin Dupont connector at another end. These are very flexible cables specially designed for connecting NEMA17 Stepper Motor with Stepper Motor Drivers . Also check Pure Copper 720mm Length Cable with Dupont Connector designed for NEMA17 Stepper Motors. It serves as a replacement cable for NEMA17 Stepper Motors and features pure copper conductors. The cable is 720mm long, making it suitable for various applications such as 3D printers. It comes with a 6-pin JST XH connector at one end and a 4-pin Dupont connector at the other end.

Pure Copper 720mm Length Cable with Dupont Connector for NEMA17 Stepper Motor This is Replacement cable for NEMA17 Stepper Motor. The conductors of this 720mm Cable with Connector for NEMA17 Stepper Motor consists of pure copper. It has an overall length of 720 mm which is very convenient to install your stepper motor systematically in your projects or 3D printers etc. It equips 6 pin JST XH connector at one end and 4 pin Dupont connector at another end. These are very flexible cables specially designed for connecting NEMA17 Stepper Motor with Stepper Motor Drivers.

Quad 2 Input NOR Gate IC - CD4001 The CD4x Series CD4001 IC is a quad, 2-input NOR gate IC. It is a monolithic CMOS transistor-based IC having efficient source and sink capabilities. Circuits that use this IC can be easily operated using the battery as CD4001 is a low-power consumption IC. A 14-pin DIP package, this IC can work at temperatures up to 125 0. The circuit in this project is built around a commonly used CD4001 IC and a few more discrete components. check out : CD4093 - Quad 2-Input NAND Schmitt Trigger IC CD4001 NOR gates provide the system designer with direct implementation of the NOR function and supplement the existing family of CMOS gates. All inputs and outputs are buffered. The CD4001 types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix). Pinout: Pinout of CD4001 IC Pin Name Pin # Type Description VDD 14 Power Supply Voltage (+3 to +15V) GND 7 Power Ground (0V) A1 to A4 1, 5, 8, 12 Input Inputs A of the four NOR gates B1 to B4 2, 6, 9, 13 Input Inputs B of the four NOR gates Q1 to Q4 3, 4, 10, 11 Output Outputs from the four NOR gates

Quad 2-Input Multiplexer IC - 74HC157 The 74HC Series 74HC157 is a 16-Pin Quad 2-Input Multiplexer IC having 2V to 6V Operating Voltage range with 1uA Low Input current and high noise immunity. It selects 4 bits of data from two sources under the control of a common data select input (S). The enable input (E) is active LOW. When E is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all other input conditions. Pinout: Pinout of 74HC157 IC Pin Number Pin Name Description 2,5,11,14 Input A This is the first input line of the 2:1 Multiplexer 3,6,10,13 Input B This is the second input line of the 2:1 Multiplexer 4,7,9,12 Output Y This is the output line pin of the Multiplexer 1 Line Select (S) The select pin selects one of the two input lines and gives it to the output line 15 Enable (E) Active low pin. Grounded for normal operation 8 Ground Connected to the ground of the system 16 Vcc This pin powers the IC, typically +5V is used. Also check 74LS161 Synch 4-Bit Counter . It has an operating voltage range of 4.5V to 5.5V and a temperature range of -55°C to +125°C Also check 74HC151 IC ( 74HC151 - 8-Input Multiplexer IC), used as a Data Selector/Multiplexer with full on-chip decoding to select one of eight data sources based on a unique three-binary code at select inputs

Quad 2-input OR gate IC - CD4071 The CD4071 2-input quad gates IC are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. The CD4x Series CD4071 have equal source and sink current capabilities and conforms to the standard B series output drive. The devices also have buffered outputs which improve transfer characteristics by providing very high gain. All inputs are protected against static discharge with diodes to VDD and VSS. check out : CD4011 - Quad 2-Input NAND Gate IC Pinout: Pinout of CD4071 IC Pin Name Pin # Type Description VDD 14 Power Supply Voltage (+3 to +15V) GND 7 Power Ground (0V) A1 to A4 1, 5, 8, 12 Input Inputs A of the four OR gates B1 to B4 2, 6, 9, 13 Input Inputs B of the four OR gates Q1 to Q4 3, 4, 10, 11 Output Outputs from the four OR gates

Quad 2-Input Schmitt Trigger IC - 74HC132 The 74HC Series 74HC132 is a quad 2-input Schmitt trigger integrated circuit that is commonly used for signal conditioning and noise filtering. The Schmitt trigger input ensures that the IC's output switches cleanly and reliably in response to changes in the input signal. The 74HC132 contains four independent gates each of which performs the logic NAND function. Each input has hysteresis which increases the noise immunity and transforms a slowly changing input signal to a fast-changing, jitter-free output. Pinout: Pinout Of 74HC132 IC

Quad 3-State Buffer IC - 74HC126 The 74HC Series 74HC126 is a 14 Pin Quad 3-State Non-Inverting Buffer IC having 4 independent gates with 4.75V to 5.25V Operating Voltage and 8mA output current. When 3-states are enabled, the outputs exhibit the low impedance characteristics of a standard HC output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned OFF presenting a high-impedance state to the bus line. check out : Quad Tri-state Buffer IC - 74HC125 Pinout: Pinout Of 74HC126 IC

Quad NOR R-S Latch Tri-state IC - CD4043 The CD4x Series CD4043 IC is quad cross-coupled 3-STATE CMOS NOR latches These latch has a separate Q output and individual SET and RESET inputs. There is a common 3-STATE ENABLE input for all four latches. A logic “1” on the ENABLE input connects the latch states to the Q outputs. A logic “0” on the ENABLE input disconnects the latch states from the Q outputs resulting in an open circuit condition on the Q output. The 3-STATE feature allows common bussing of the outputs. Pinout: Pinout of CD4043 IC Applications: Multiple bus storage Strobed register Four bits of independent storage with output enable General digital logic

Quad Tri-state Buffer IC - 74HC125 The 74HC Series 74HC125 Quad tri state buffer IC contains four independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. The Quad tri state buffer IC 74HC125 is a great choice for those looking to extend the capabilities of their projects’ circuits. This integrated circuit allows you to use up to four separate, bi-directional data buses with independent control signals without increasing board space or power consumption. With its three state logic outputs, it ensures maximum flexibility and efficiency in each application that requires signal buffering such as multiplexers/demultiplexers communications systems and bus switching applications. In addition, this product has very low power dissipation making it ideal for battery-operated devices while keeping your final design compact at the same time! This chip comes in an industry-standard 4-pin dual inline package (DIP) allowing easy integration into any project with minimal soldering needed on boards already designed using 5V CMOS technology standards. Furthermore, its wide operating temperature range capable of reaching up to -55°C (-67F), makes our tristate buffer the perfect solution when developing products for extreme climates such as freeze and require monitoring equipment outdoors or lab settings where extremely high temperatures are reached. The combination of these two features along with durability make this tri state buffer IC suitable for most extreme working conditions applications perfectly replacing discrete components used before! Pinout: Pinout of 74HC125 IC

1045 CW CCW Quadcopter Propeller This is a set of 2 x 1045 Propellers. The set includes one clockwise rotating and one counter-clockwise rotating propeller with 2 x propeller shaft adapters. The adapters allow the drone propeller to be used with motors of different shaft diameters. This 1045 propeller can be used with brushless motors with an 800-2200 kV rating. With a low kV motor(800 - 1400 kV), this propeller offers smooth flights with longer flight times perfect for FPV and aerial photography. With a high kV motor (more than 1200 kV) this propeller offers fast flights perfect for acrobatic flights. This drone propeller can be used with our A2212 1000KV , 1400KV , 1800KV, and 2200kV motors and our 30A ESC . Note: Buy additional propellers than required on your multirotor as propellers are regularly broken during flight crashes Find the perfect Drone Parts for your next project! Features: Designed for drones and quadcopters Sturdy construction to withstand shock upon crash landing Best compatible motors: 800kv - 1100kv motors Recommended for a wheelbase of 550mm - 700mm Provides smooth flights with longer flight times for low kV motors Offers fast flights for acrobatic flights with high kV motors Designed for FPV and aerial photography Can be used with A2212 1000KV, 1400KV, 1800KV, and 2200kV motors and 30A ESC Browse our collection of durable drone propellers ! Applications: Suitable for various quadcopters and drones. Ideal for FPV (First Person View) applications. Can be used with specific motors such as A2212 1000KV, 1400KV, 1800KV, and 2200kV. Widely used in DIY drone projects and custom-built quadcopters. Offers versatility in adapting to motors with different shaft diameters, thanks to included propeller shaft adapters. The lightweight and sturdy construction make them suitable for both hobbyist and professional drone applications.