Mini USB 2.0 Cable 30 cm (Colour May Vary) This is the mini USB Cable for Nano Board is compatible with Arduino (USB 2.0 A to USB 2.0 Mini B) 1 meter Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer. A Mini USB 2.0 cable is a type of USB cable that is used to connect devices with Mini USB 2.0 ports to computers or other devices. Mini USB 2.0 cables are commonly used to connect devices such as smartphones, digital cameras, and portable hard drives to computers. USB (Universal Serial Bus) is a standard for connecting devices to computers and other devices. Mini USB 2.0 is a version of the USB standard that uses a smaller connector than standard USB connectors. Mini USB 2.0 cables are typically used to connect devices that have limited space for connectors, such as smartphones and portable hard drives.

Mini USB Cable (1 meter) This Mini USB Cable is designed for Nano board compatible with Arduino . The USB A to MINI B with Nickel Plated Connector is the plug-and-play connection cable with MP3 players, digital cameras and PDAs, External Hard Drives. This Mini USB Cable is ideal for transferring your pictures from your digital camera to your PC or Mac.

Mini USB Nebulizer Circuit The circuit board product voltage is MICRO USB 5V, current 300mA, power 2W, frequency 113KHz\108KHz, and special drive chip for fixed frequency atomizer. Immediately after power-on, the amount of output is large. With 8-hour timing function, an external switch can be used to control the opening and closing of the atomizer. These waves are used to create the mist that can be inhaled. The circuit sensor also likely includes a power supply, such as a 5VDC USB connection, to provide power to the transducer, and a control circuit to regulate the frequency of the ultrasonic waves, in this case, 108Khz. This type of nebulizer circuit is portable and can be powered by a USB connection, making it easy to use and carry around.

Mini UVC Disinfectant Sanitiser Stick Through UV Radiation, the DNA structure of a single-celled virus will be damaged. This will lead to virus of immediate death or reproduction capability. It usually takes 30 seconds for the effects of sanitisation to kick in. It has been proven that UV Sanitisation can destroy Influenza, Streptococcus pneumonia, Staphylococcus Aureus, Ecoli.

Mini Water Flow Sensor (White) A water flow sensor is made up of a plastic valve through which water can pass. A water rotor and a Hall effect sensor are used to sense and measure the flow of water. When water flows through the valve, it causes the rotor to rotate. The motor's speed can be changed as a result of this. The hall effect sensor calculates this change and outputs it as a pulse signal. The rate of flow of water can thus be measured. The Hall effect is the primary operating principle of this sensor. The rotation of the rotor induces a voltage difference in the conductor in this sensor, according to this principle. This induced voltage difference runs in the opposite direction of the electric current. When the moving fan rotates due to the flow of water, the rotor rotates, inducing a voltage. The hall effect sensor measures the induced voltage and displays it on the LCD display. The mini water flow sensor can be used with hot, cold, or warm water, as well as clean or dirty water. A microcontroller board such as Arduino , Raspberry pi , a LCD display or OLED Display , Breadboard and connecting wires are required for this. The sensor is installed at the water source inlet or the pipe opening. Three wires are connected to the sensor. The red wire connects to the supply voltage. A black wire connects to the ground, and a yellow wire collects the Hall effect sensor output. Key Features: Uses Hall effect technology to detect flow accurately. Operates between 3.5 and 18 volts DC. Provides 450 pulses per liter for accurate flow monitoring. Fluid flow ranges from 0.5 to 5 liters per minute. It is best suited for low to medium flow rates. Suitable for hot, cold, warm, clean, and unclean water. Compatible with microcontroller boards including Arduino and Raspberry Pi. Applications: This product can be used in water heating systems Automatic water dispensers Other flow metering equipment.

Mini Wire Stripper A simple manual wire stripper is a pair of opposing blades much like scissors or wire cutters. The addition of a centre notch makes it easier to cut the insulation without cutting the wire.

MK2A PCB Aluminium Heatbed This heatbed for 3D printers is of the model MK2A and is aluminium manufactured PCB. It is an overall black coloured aluminium heatbed and has a thickness of 3mm. The power input needed for the 3D printer heatbed is 12V 200W/24V 240W. This high-quality aluminium Plate PCB Heat Bed is compatible for MK2A 3D printer, MK2B and MK3. The PCB Heat bed comes along with a 60 cm cable and LED Thermistors. Heat beds are used because they dramatically improve print quality by keeping the extruded plastic warm and thus preventing warping. Features of the MK2A Aluminium Heatbed Model MK2A Heatbed Material Aluminium Size 300 x 200 mm Thickness 3mmThe Mk2A Colour Black on both sides Power Input 12V 200W/24V 240W Compatibility MK2A 3D printer, MK2B and MK3

MK2B Heatbed The MK2B 3D printer heat bed is a dual powered PCB heatbed that is designed for compatibility with 3D printers. The Mk2B heat bed is manufactured with high quality glass fibre that provides a truly flat surface and rigidity. The solder pads of the MK2B heat bed has a huge size that makes it easier for using surface mount components. This item is manufactured with premium material for durable and long lasting use. The prints come off cleanly with no lines on the bottom from multiple pieces of tape. Easy to apply and remove, with strong adhesion. Compatible with any 3d printer that can accept the ramps mk2b version of heat bed like reprap, mendel, prusa and other various DIY 3d printers. These boards are all fully tested to confirm even heat distribution and correct resistance note: before touching, power off the heat bed and wait at least 10 minutes; still hot after powered off; do not leave unattended; keep away from children as the nature of the PCB material, flatness can't be defined and you will need an aluminum or glass top plate 12v connection: one cable connected to terminal 1(+ve), another cable connected to terminal 2 and 3 (-ve). Default connection provided with product for 12v power supply. Made of high quality material, it is durable and long lasting use. - Perfect tape to use for your 3D Printer. - Prints come off cleanly with no lines on the bottom from multiple pieces of tape. - Easy to apply and remove, with strong adhesion.

MK8 Extruder DIY Kit for 3D Printer - Right hand side The MK8 extruder DIY kit is manufactured with great precision and is made from aluminium alloy material. Using aluminium as the material of manufacture for MK8 extruder kit is a great choice since it makes the MK8 extruder compact, lightweight and durable. The force used for extrusion is flexible, adjustable and uniform throughout. Also check the Hobbed M8 Bolt for Wade's Extruder available on Iotcart. The hobbed bolt is used to push filament into the nozzle and has a strong driving force. The hobbed part is 26mm from the center to the bottom of the head, and the overall length is 65mm, with 60mm from the bottom of the head to the end of the threads.

MK8 Extruder for 3D printers The MK8 extruder features outstanding quality and ensures better performance for 3D printers . The MK8 extruder is manufactured with a V design which makes it convenient for users to load the filament right to the end of the barrel. This extruder model for 3D printers is equipped with a PTFE tube inside the barrel. This ensures that there is fluent feeding of the filament. It also features a self-lubricating system that avoids any blockage.