12A 300W DC-DC Buck Converter Step down Power Module 7-32V to 0.8-28V

7Semi DC-DC Buck Converter 14V-60V Input to 5V 3A Output- AP66300 (BO-10189) The 7Semi DC-DC Buck Converter 14V–60V Input to 5V 3A Output – AP66300 (BO-10189) is a compact power module designed to convert high DC input voltages into a stable 5V output with up to 3A current. Its wide input range makes it suitable for applications that use automotive, industrial, or high-voltage power sources. Built on an efficient synchronous buck design, this converter delivers reliable power with low heat generation and minimal energy loss. It is well suited for powering microcontrollers, sensors, communication modules, and other embedded electronics. Whether you’re working on industrial systems, automation projects, or advanced DIY builds, this buck converter provides a dependable and efficient power solution. Features: Wide input range: accepts 14V to 60V DC sources Provides a stable 5V output at up to 3A High-efficiency buck converter design for low energy loss Compact breakout board for easy project use Built-in power protection for safer operation Ideal for automotive, industrial, and embedded electronics Supports powering microcontrollers, sensors, and communication modules Efficient solution for IoT, automation, and high-voltage systems

3V CR2025 Lithium Coin Battery The CR2032 3V Lithium Coin Battery is widely utilized due to its dependable and long-lasting power supply for a variety of small electronic devices. This cr2032 battery includes calculators, wristwatches, remote controls, various medical devices, fitness gadgets, machines, toys, and others. Featuring a flat top and a 225mAh capacity, the cr2032 battery is a 3V lithium coin battery that's specifically designed for use in miniaturized products. Its plus terminal utilizes manganese dioxide, which is chemically stable, resulting in 90% capacity retention even after a decade of proper storage. Additionally, The battery organic electrolytes are resistant to leakage when exposed to environmental changes. Features High and Stable voltage (3V) A full lineup for use in a wide variety of applications No mercury added Useful in a wide range of temperatures (-30°C to +60°C) The very high weight-to-power ratio Manganese dioxide material High capacity Long Lasting life. Low self-degradation rate and superior storability 0.2mA continuous standard drain High leak protection and hence no oxidation damage in devices, so it can be used in any expensive Gadget with superior safety. Resistance to continuous discharge and hence Very low self-discharge; Note: These batteries are Non-Rechargeable. ?Also check 24mm Coin type battery holder available on the Iotcart website. The holder is versatile, accommodating various sizes and shapes of coin cells, with a secure design to withstand shock and vibration. It operates at a voltage rating of 3.3V and finds applications in portable devices, computers, consumer electronics, power management, commercial, and security.

7Semi DC Buck Converter Breakout 5V 2A Out (AP62301) (BO-10133) The 7Semi DC Buck Converter Breakout 5V 2A Out (AP62301) is a small power module that converts higher DC input voltages into a steady 5V output with up to 2A current. It allows you to power 5V-based electronics from a wide range of DC power sources such as batteries and adapters. This makes it perfect for projects that need a reliable 5V supply. Built with an efficient synchronous buck converter design, this module delivers stable power while keeping energy loss and heat to a minimum. Its compact size makes it easy to add to space-limited electronics projects like IoT devices, microcontroller boards, and portable systems. Whether you’re building sensors, development boards, or embedded systems, this buck converter gives you a simple and dependable way to get 5V power. Features: Provides a stable 5V output with up to 2A continuous current Accepts a wide range of DC input voltages for flexible power sources Efficient synchronous buck converter design for low power loss Low heat generation for cool and reliable operation Compact breakout board for easy integration and prototyping Ideal for powering 5V microcontrollers, sensors, and IoT devices Perfect for embedded systems, portable electronics, and hobby projects

AA 4-Cell Battery Holder – Hard Plastic 6V Battery Case with Wire Leads This AA 4-Cell Battery Holder is a durable and reliable power solution designed to securely hold four AA batteries and deliver a stable 6V output. Built from high-quality hard plastic, it ensures long-lasting performance and is ideal for DIY electronics, school projects, robotics, LED circuits, Arduino-based builds, and small hobby devices. Its compact size and lightweight design make it easy to integrate into any enclosure or prototype. The holder includes pre-attached wire leads, making soldering or connecting to breadboards fast and convenient. Whether you're assembling a small electronic project, building battery-powered gadgets, or replacing a damaged battery case in a device, this 4-cell AA battery holder provides a dependable and easy-to-use power source. Its secure cell grip keeps the batteries firmly in place, preventing loose connections during operation. Features: Holds 4 AA batteries, providing a stable 6V DC output for electronics and DIY projects. Built with hard, durable plastic to ensure long-term reliability and secure battery placement. Comes with pre-soldered wire leads for easy connection to Arduino, breadboards, or circuits. Lightweight and compact design makes it suitable for robotics, small appliances, and prototyping. Provides firm battery retention to avoid shaking or disconnection during movement or vibration. Ideal for hobbyists, students, and makers working on low-voltage portable power applications.

SmartElex 5V 1A LM2575S Buck Converter Module The SmartElex 5V 1A LM2575S Buck Converter Module is a compact step-down power solution designed to provide a stable 5V output from a higher DC input source. It helps solve common power regulation issues in electronic projects by ensuring consistent voltage delivery to sensitive components. This module is suitable for students, makers, engineers, educators, and startups who need a reliable and easy-to-use power module for embedded systems, learning projects, and everyday electronics development. This buck converter module is ideal for powering microcontrollers, sensors, communication modules, and peripherals used in robotics, IoT devices, automation systems, and general prototyping. It can be easily integrated into projects using platforms such as Arduino, Raspberry Pi, and ESP32, making it convenient for both experimentation and final builds. The dependable performance and simple integration allow users to focus on application development without worrying about unstable power supply. Note: Ensure adequate heat dissipation during high power output. Suitable for powering devices that require a stable 5V power supply. Ideal for circuits and projects that need a 5V stable output with 1A current draw. Features: Wide input voltage support for flexible use across projects Fixed and stable 5V output for low-power electronics Delivers up to 1A output current for reliable performance Efficient switch-mode design to reduce heat and power loss Compact and sturdy module for easy integration Built-in protection against overcurrent, overheating, and short circuits Applications: Power supply for Arduino, Raspberry Pi, ESP32, and other controllers Supplying 5V power to sensors, modules, and peripherals Battery-powered devices needing efficient step-down conversion LED lighting and small DC-powered systems DIY electronics projects and prototyping setups

SmartElex 5V/3.3V Power Supply Stick with ON/OFF Switch The SmartElex 5V/3.3V Power Supply Stick with ON/OFF Switch is a compact and efficient regulated power supply module designed to provide reliable power for breadboard-based electronics and prototyping projects. It operates on a 6–12V DC input and delivers a stable, selectable 5V or 3.3V output, making it ideal for powering microcontrollers, sensors, and logic modules. This power supply module features an onboard ON/OFF switch for easy control, a voltage selection switch for flexibility, and a power LED for real-time status indication. To ensure safe operation, it is equipped with a PTC fuse that protects against overcurrent, helping safeguard both the connected components and the module itself. Features: 6-12V input through barrel jack or 2-pin header. The output voltage can be controlled to either 3.3V or 5V. 800mA of operational current. An ON/OFF switch allows for convenient control. Voltage selection switch for 3.3V/5V output. The power status LED provides visual indication. PTC fuse protection against overloads. Breadboard-friendly headers have a 0.1" pitch for simple insertion.

5V WiFi Smart Relay Module for IoT & DIY Projects The 5V WiFi Relay Module is a smart control board that lets you switch electrical devices on and off using a WiFi connection. It works with standard 5V power and can be connected to home networks, allowing remote control of lights, fans, appliances, and other devices through your smartphone or automation system. This module is designed for easy integration with DIY electronics and smart home projects. It provides reliable switching performance and can be used in both residential and hobby automation setups. Whether you’re building a custom smart switch or adding wireless control to your gadgets, the 5V WiFi Relay Module offers a simple and flexible way to make your devices connected and controllable over WiFi. Features: Operates on 5V power supply for easy integration Enables wireless ON/OFF control of electrical devices over WiFi Suitable for smart home and IoT automation projects Supports remote switching via mobile app or automation system Reliable relay-based output for controlling loads safely Compact module design for DIY electronics and embedded systems Ideal for controlling lights, fans, pumps, and appliances

1200mAh AAA Rechargeable Battery 1.2V (Pack of 2) The OSLETECH AAA Rechargeable Batteries combine efficiency, effectiveness, and environmental friendliness in the ideal balance. This pair of globally recognized and broadly compatible Ni-Mh batteries are fully charged and ready to use right out of the package. Boasting an industry-leading 1200mAh capacity, these batteries offer over 500 charge cycles and feature a no-memory effect, allowing them to be charged and discharged as needed without losing capacity. These batteries also support quick charging via any smart or quick charger. These OSLETECH 1200mAh Rechargeable AAA Batteries are also designed for Rechargeable and reusable with the environment in mind. These batteries are made in India products and the smart choice for sustainable energy. Key Features: Cost-effective with many recharge cycles. NiMH chemistry for balanced performance. Fits various devices. Available in different mAh ratings. Rated at 1.2 volts for broad compatibility. Charging time varies by charger. Applications: Remote controls Digital cameras Wireless computer accessories Compact flashlights Portable audio devices Toys Clocks Calculators Handheld gaming devices Medical devices

7Semi DC-DC Buck Converter 7V-40V Input to 5V 5A Output- AP64500 (BO-10188) The 7Semi DC-DC Buck Converter 7V–40V Input to 5V 5A Output – AP64500 (BO-10188) is a high-power voltage regulator module designed to convert higher DC input voltages into a stable 5V output with up to 5A current. Its wide input range makes it suitable for many power sources, including batteries and industrial supplies, where reliable 5V power is needed. Built around the efficient AP64500 synchronous buck converter, this module delivers stable output with low heat and high efficiency, even under heavy load. It is well suited for powering microcontrollers, single-board computers, sensors, and communication modules. Whether you’re building robotics, automation systems, or advanced electronics projects, this buck converter provides dependable and efficient power management. Features: Wide input voltage range: 7V to 40V DC Stable 5V output with up to 5A continuous current High-efficiency synchronous buck converter using AP64500 Low thermal loss and reliable performance under load Compact breakout module for easy project integration Built-in power protection features for safe operation Ideal for microcontrollers, SBCs, IoT and embedded systems Suitable for robotics, automation, and power supply projects

SmartElex Serial Bus Servo Driver Board, Integrates Servo Power Supply and Control Circuit The SmartElex Serial Bus Servo Driver Board is an advanced Servo Driver Board designed to simplify high-density servo control in robotics applications. It integrates a reliable Servo Power Supply and intelligent Control Circuit, allowing seamless communication with your MCU or host system through a single UART interface With sufficient external power, the board can manage up to 253 ST/SC-series serial bus servos, each capable of delivering detailed feedback such as position angle, load, operating voltage, temperature, and working mode. This centralized control approach minimizes wiring, saves space, and ensures precise, synchronized motion, making it an excellent choice for complex robotic systems and professional-grade automation projects. Features: Supports a serial UART interface to the MCU/host for servo control. Drives up to 253 ST/SC series serial bus servos concurrently. Onboard DC power supply (9V to 12.6V) for the servo rail. Servo feedback includes angle, load, voltage, mode, temperature, and error. Integrated control circuit for reliable operation and signal integrity. Jumper or switch to choose between UART and USB connection modes. Compact PCB footprint (approx. 42 x 33 mm) for confined places. Dual power inputs: DC barrel jack and screw terminal choices.

7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) The 7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) is a compact power module designed to step down higher DC voltages to a stable 3.8V output with up to 2A current. It supports a wide input voltage range, making it suitable for use with batteries, adapters, and other DC power sources in low-voltage electronics. Built on an efficient synchronous buck converter design, this module delivers reliable power with minimal heat and energy loss. Its small size makes it ideal for space-constrained projects such as IoT devices, embedded systems, and portable electronics. Whether you’re prototyping or building a final product, this buck converter offers a simple and dependable power solution. Features: Provides stable 3.8V output at up to 2A continuous current Accepts a wide DC input range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient power use Compact breakout board for easy integration Ideal for IoT, battery-powered, and embedded electronics Suitable for microcontrollers, sensors, and small devices

SmartElex 3.3V 1A LM2575S Buck Module The SmartElex 3.3V 1A LM2575S Buck Module is a compact step-down power converter designed to provide a stable 3.3V output from a higher input voltage source. It helps solve common power regulation challenges in electronic projects by ensuring sensitive components receive consistent voltage without overheating or voltage drops. This module is suitable for students, hobbyists, engineers, educators, and startups who need a dependable power solution for embedded systems, DIY electronics, and learning-based projects. This buck module is well suited for use in robotics, IoT devices, automation systems, and general prototyping where a reliable 3.3V supply is required. It can be easily integrated with popular development platforms such as Arduino, Raspberry Pi, and ESP32 to power sensors, communication modules, and controllers. The simple design and dependable performance make it easy to add to both experimental setups and final products, helping users focus on functionality rather than power stability. Note: Ensure proper heat dissipation to avoid overheating during high-power output. Suitable for applications requiring a stable 3.3V power source. Ideal for powering devices in the 3.3V range with 1A current draw. Features: Wide input voltage support from 7V to 40V DC Fixed and stable 3.3V output for low-voltage electronics Delivers up to 1A output current for reliable power delivery High efficiency design helps reduce heat and power loss Built-in protection against overcurrent, overheating, and short circuits Compact and durable module for easy integration into projects Applications: Battery-powered devices needing efficient step-down voltage regulation Power supply for sensors, communication modules, and peripherals Suitable for Arduino, Raspberry Pi, ESP32, and other microcontrollers Low-power LED lighting and small DC-powered electronics Ideal for DIY electronics, learning projects, and prototyping setups

7Semi MAX17048 LiPoly - LiIon  Battery Fuel Gauge Breakout Module The 7Semi MAX17048 LiPoly - LiIon  Battery Fuel Gauge Breakout Module is a reliable and easy-to-use battery fuel gauge module built for accurate monitoring of single-cell lithium batteries. Using the MAX17048 IC, this single-cell lithium battery monitor delivers precise state-of-charge and voltage measurements without the need for a current-sense resistor, simplifying circuit design. With its I2C interface, the board integrates smoothly with microcontrollers, making it perfect for real-time battery tracking in portable devices, IoT applications, and DIY electronics projects. Features: MAX17048-based battery fuel gauge module for accurate SoC measurement Supports Li-Ion and Li-Poly single-cell lithium battery monitoring No current-sense resistor required for simplified design I2C communication for easy microcontroller integration Compact breakout board suitable for portable and IoT projects Benefits: Streamline your process: Avoid project delays and time-consuming guesswork with instantaneous battery % monitoring. For seamless and effective operations, know precisely when it's time to recharge. Advanced surveillance without the trouble: These intricate battery calculations are handled by the sophisticated MAX17048 microcontroller, which provides you with extremely precise data without requiring any programming or analysis on your behalf. All-purpose compatibility for every project: Whether you're using Arduino, Raspberry Pi, or other well-known microcontrollers, you can easily incorporate this board into your configurations. For optimal versatility across many systems, it supports both 3.3V and 5.0V logic levels. Optimize battery life by tailoring low-power modes and alarms to your specific project requirements, making the most of your LiPo batteries for extended runtimes. Go beyond simple voltage measurements: The MAX17048 offers a reliable, real-time state-of-charge percentage, so you can learn the truth about the condition of your battery.

CR2032 3V Lithium Coin Battery The CR2032 3V Lithium Coin Battery is widely utilized due to its dependable and long-lasting power supply for a variety of small electronic devices. This cr2032 battery includes calculators, wristwatches, remote controls, various medical devices, fitness gadgets, machines, toys, and others. Featuring a flat top and a 225mAh capacity, the cr2032 battery is a 3V lithium coin battery that's specifically designed for use in miniaturized products. Its plus terminal utilizes manganese dioxide, which is chemically stable, resulting in 90% capacity retention even after a decade of proper storage. Additionally, the battery organic electrolytes are resistant to leakage when exposed to environmental changes. Features High and Stable voltage (3V) A full lineup for use in a wide variety of applications No mercury added Useful in a wide range of temperatures (-30°C to +60°C) The very high weight-to-power ratio Manganese dioxide material High capacity Long Lasting life. Low self-degradation rate and superior storability 0.2mA continuous standard drain High leak protection and hence no oxidation damage in devices, so it can be used in any expensive Gadget with superior safety. Resistance to continuous discharge and hence Very low self-discharge;

SmartElex TPS5430D 3A Adjustable Buck Converter The SmartElex TPS5430D 3A Adjustable Buck Converter is a compact and efficient DC-DC step-down module designed for precise voltage regulation. Capable of delivering up to 3A continuous output, it provides stable power for embedded systems, battery-powered devices, and industrial equipment. With excellent thermal performance and high reliability, this module ensures efficient voltage step-down conversion, making it perfect for electronics projects and applications requiring consistent power management. Features: Input voltage range: generally, 5V to 36V (see datasheet for exact specifications). Adjustable output voltage via inbuilt potentiometer. Maximum output current: 3 amps. High efficiency of 90% or greater. Overcurrent and thermal shutdown protection Compact PCB module design for easy integration. Low ripple and noise output. Suitable to power microcontrollers, sensors, and other devices. Excellent build quality and dependability