MB102 830 Points Solderless Breadboard

SmartElex MicroB USB Breakout Board The SmartElex MicroB USB Breakout Board is a compact adapter board designed to make it easy to access the pins of a Micro-B USB connector for prototyping, development, and testing. It breaks out the USB port into simple pin headers, allowing users to interface USB power and data lines with custom circuits, breadboards, and microcontroller boards. This USB breakout board is ideal for students, makers, educators, and engineers who need a quick and reliable way to add USB connectivity to their electronics projects without designing a custom PCB. This board is commonly used in robotics, IoT applications, embedded system development, device repair, and hardware prototyping where USB access is required for powering circuits or transferring data. It works smoothly with platforms like Arduino, Raspberry Pi, and ESP32, enabling fast integration with both beginner and advanced projects. With its straightforward layout and sturdy connector design, the SmartElex MicroB USB Breakout Board is a practical and efficient choice for workshops, prototyping labs, and DIY electronic builds that require stable Micro-B USB interfacing Features: Micro-B USB connector broken out to easy-to-use header pins Simplifies USB power and data access for prototyping and testing Supports quick integration with breadboards and custom circuits Compatible with Arduino, Raspberry Pi, ESP32, and microcontrollers Ideal for DIY repairs, IoT projects, and embedded hardware development Compact and beginner-friendly design for rapid project setup

7Semi MCP9808 I2C Temperature Sensor Breakout The 7Semi MCP9808 I2C Temperature Sensor Breakout is a precision I2C temperature sensor module designed to deliver accurate and reliable temperature measurements with minimal effort. Built around the high-accuracy MCP9808 temperature sensor IC, this breakout board provides easy digital temperature sensing through a standard I2C interface, making it ideal for projects where precise environmental monitoring is essential. It solves the challenge of interfacing analog temperature sensors with microcontrollers by offering a simple digital communication method that eliminates the need for complex calibration. This compact sensor module is highly compatible with popular development platforms like Arduino, Raspberry Pi, and other microcontrollers, offering stable performance and low power consumption. With its high accuracy and straightforward interface, it’s perfect for students, hobbyists, and professionals working on weather stations, HVAC systems, data loggers, thermal control systems, and indoor environmental monitoring projects. Its robust design ensures dependable readings across a wide range of applications, reducing development time and improving overall system reliability. Features: High-accuracy MCP9808 sensor IC with ±0.25 °C typical precision Wide operating temperature range from –40 °C to +125 °C High-resolution temperature readings with 0.0625 °C resolution Supports 2.7V to 5.5V power and logic levels for flexible compatibility I²C interface allows connection of up to 8 sensors on a single bus Compact breakout board for easy integration in embedded projects

7Semi SHT41 Temperature & Humidity Sensor Breakout with I2C Qwiic Interface The 7Semi SHT41 Temperature & Humidity Sensor Breakout is a high-precision humidity sensor module built for engineers, developers, and IoT creators who need reliable environmental data in compact embedded systems. Powered by Sensirion’s advanced CMOSens® technology, this I2C temperature sensor delivers accurate readings across a wide range, making it ideal for smart home automation, HVAC upgrades, weather stations, and industrial monitoring systems. With its accurate ±1.5% RH humidity and ±0.2°C temperature performance, it ensures consistent measurements even in demanding environments. Designed with a built-in Qwiic connector, the breakout allows fast, solder-free plug-and-play integration into Qwiic-compatible ecosystems like Arduino, Raspberry Pi, and other development platforms. Its quick response time, low power consumption, and compact 30 × 22 mm footprint make it a dependable environmental monitoring sensor for portable, battery-powered devices, IoT prototypes, and educational projects. Whether used in climate control systems or air-quality tracking, the SHT41 provides robust, long-term stability. Features: Designed with Sensirion’s CMOSens® technology to deliver high-accuracy temperature and humidity readings with long-term stability. Offers a full 0–100% RH humidity range and a wide temperature range of -40°C to 125°C, making it suitable for varied climates and applications. Integrated Qwiic connector provides seamless, solder-free connectivity for rapid prototyping and easy hardware integration. Supports I2C communication, allowing compatibility with Arduino, Raspberry Pi, ESP32, and other development platforms. Features a compact and lightweight 30 × 22 mm PCB, ideal for embedded and space-constrained designs. Operates on 3.3V–5V supply with low operating current, making it suitable for battery-powered and energy-efficient systems.

SmartElex Rotation Sensor The SmartElex Rotation Sensor is a digital sensing module designed to detect rotational movement and direction using quadrature output signals. It helps measure rotation accurately without complex mechanical setups, making it useful for tracking motion, speed, or position in electronic systems. This sensor is suitable for students, makers, engineers, educators, and startups who are working on electronics, robotics learning projects, or prototypes that require reliable rotation detection. This rotation sensor is widely used in robotics, automation systems, and IoT projects where monitoring wheel rotation, motor movement, or shaft position is essential. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into both experimental and functional setups. Common applications include robot wheel encoders, speed measurement systems, user input controls, and motion-based automation projects, where consistent output and simple integration help streamline development. Note: Refer to User Manual in the ATTACHMENTS section for more info. regd. the product. Features: Digital rotation detection sensor with quadrature output Detects rotational movement and direction accurately Provides reliable signals for speed and position measurement Contactless sensing for long-lasting operation Compatible with Arduino, Raspberry Pi, ESP32, and similar controllers Ideal for robotics, automation, and motion-tracking applications

SmartElex 12V 3A 8 Channel Signal Relay Module The SmartElex 12V 3A 8 Channel Signal Relay Module is a reliable control solution designed to switch multiple electrical devices using low-power control signals. It allows users to safely manage higher-voltage or higher-current loads without directly connecting them to sensitive control circuits. This module is suitable for students, makers, engineers, educators, and startups working on embedded systems, automation projects, and control applications that require dependable multi-channel switching. This 8-channel relay module is ideal for robotics, IoT systems, home and industrial automation, and advanced prototyping where several devices need to be controlled independently. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32 to control lights, motors, pumps, relays, or other external equipment. The straightforward design and consistent performance make it easy to integrate into both experimental setups and finished products, supporting safe and efficient control across a wide range of applications. Features: 8-channel relay module for controlling multiple devices independently Operates on 12V, suitable for automation and control systems Supports up to 3A load current per relay channel Electrical isolation between control signals and load circuits Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact board design with LED indicators for channel status

SmartElex PCA9306 Logic Level Translator Breakout Module The SmartElex PCA9306 Logic Level Translator Breakout Module is a compact solution designed to shift signal voltages between different logic levels in electronic systems. This PCA9306 level translator helps connect components that operate at mismatched voltages, such as 1.8V, 3.3V, and 5V devices, without risking damage or unstable communication. It is ideal for students, hobbyists, engineers, educators, and startups who need a simple and reliable way to manage voltage differences in mixed-signal circuits, sensor interfaces, and microcontroller projects. With its bidirectional design, this voltage level translator supports seamless communication in both directions, making it suitable for robotics, IoT devices, automation systems, and embedded prototyping. It works smoothly with platforms like Arduino, Raspberry Pi, ESP32, and other controllers, allowing easy integration with modules, displays, and sensors. Whether used as a bidirectional level shifter for I2C communication or for general logic conversion, it offers a practical way to ensure safe and consistent signal translation across a range of development environments. Features: Based on the PCA9306 bidirectional level shifting IC Safely converts logic levels between 1.8V, 3.3V, and 5V devices Supports I2C and general-purpose bidirectional communication Protects components from voltage mismatches and signal damage Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact breakout design for fast prototyping and integration

Cytron UNO Special Edition – Arduino-Compatible Board with Side Connectors The Cytron UNO Special Edition (CT-UNO-SE) is a fully Arduino-compatible development board designed for makers, students, and hobbyists who need reliable performance for DIY electronics and robotics projects. Built around the ATmega328P microcontroller, this board offers the familiar Arduino UNO experience while adding enhanced stability with the FTDI FT231X USB-to-Serial chip, ensuring smoother programming and communication. Whether you're prototyping sensors, robotics circuits, or automation systems, this board delivers a dependable and beginner-friendly platform for all your microcontroller learning needs. What makes the CT-UNO-SE stand out is its unique side connectors, allowing it to be stacked on top of or beneath Arduino shields, giving you maximum flexibility while building layered circuits or compact embedded systems. With full Arduino UNO R3 shield compatibility, 14 digital I/O pins, 6 analog inputs, and both 5V and 3.3V regulated outputs, this special edition board combines convenience, versatility, and long-term durability - all wrapped into a sleek white PCB that makes your projects look clean and professional. Features Built with the ATmega328P microcontroller paired with the Optiboot bootloader for faster program uploads. Equipped with the FTDI FT231X USB interface, offering stable and reliable serial communication. Supports a wide DC input range of 7–15V, suitable for most maker power setups. Includes a 1A 5V regulator and 500mA 3.3V regulator for powering sensors and modules. Offers 14 digital I/O pins (6 PWM) and 6 analog inputs for versatile interfacing. Fully R3 shield compatible with special side connectors for flexible stacking. Features 32KB Flash memory, 2KB SRAM, and 1KB EEPROM for program storage. Comes with easily visible TX, RX, power, and pin-13 LEDs placed on the board edge. Utilizes a durable USB Micro-B connector on a clean white PCB. Dimensions

SmartElex BS312 PIR Motion Sensor The SmartElex BS312 PIR Motion Sensor is a compact passive infrared sensor designed to detect human motion by sensing changes in infrared radiation. It helps systems respond only when movement is present, reducing unnecessary power usage and improving efficiency. This sensor is suitable for students, makers, engineers, educators, and startups who are building electronics projects that require reliable motion detection in a small, low-power form factor. This PIR motion sensor is ideal for robotics, IoT devices, security systems, and automation projects, especially those that run on batteries or need low standby power consumption. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, making integration quick and straightforward. Common use cases include motion-activated lighting, smart alarms, occupancy detection, and compact IoT monitoring solutions where dependable performance and simple integration are essential. Features: Compact PIR sensor for accurate human motion detection Detects movement using passive infrared technology Low power consumption ideal for battery-powered projects Digital output for easy interfacing with microcontrollers Fast response time for real-time motion detection Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

7Semi Vikram-3025 High-Power 25A DC Motor Driver for 6–30V Motors The 7Semi Vikram-3025 is a heavy-duty single-channel DC motor driver built for demanding robotics, automation, and mechatronics projects. Designed to handle 25A continuous load with a 6V–30V operating range, it uses a high-efficiency discrete NMOS H-Bridge that eliminates the need for bulky heat sinks. Whether you're powering high-torque DC motors or creating reliable industrial controls, this driver ensures stable, smooth, and responsive performance. With built-in safety features like overcurrent protection, temperature protection, and undervoltage shutdown, your system stays secure even under heavy loads. This motor driver goes beyond basic control, it includes onboard test buttons, motor output LEDs, and a regulated 5V output for powering microcontrollers, making prototyping extremely convenient. It supports PWM/DIR control signals from a wide range of logic voltages (1.8V to 30V), ensuring compatibility with Arduino, Raspberry Pi, PLCs, and other controllers. It also offers manual control options using a potentiometer and switch, giving both beginners and advanced users flexible control in real-world applications. This makes it a dependable choice for custom robotics, high-power motor control, and automation systems. Features: Provides smooth and reliable bidirectional control for single brushed DC motors. Supports a wide operating voltage range from 6V to 30V for flexible motor compatibility. Handles a continuous motor current of 25A, ideal for high-load or high-torque applications. Includes an onboard 5V regulated output (250mA) to power a microcontroller without an external supply. Onboard test buttons and motor state LEDs allow quick, controller-free testing during prototyping. Offers dual input modes: PWM/DIR for digital control or potentiometer/switch for manual operation. Compatible with 1.8V, 3.3V, 5V, 12V, and 24V logic, making it suitable for Arduino, Raspberry Pi, PLCs, and more. Supports PWM input frequency up to 40kHz with a fixed 16kHz output for quiet motor operation. Built-in protections include active current limiting, overcurrent protection, temperature protection, and undervoltage shutdown.

SmartElex 12V 10A Single Channel Power Relay Module The SmartElex 12V 10A Single Channel Power Relay Module is a reliable switching solution designed to control high-power electrical loads using low-voltage control signals. It helps safely operate devices that draw higher current without directly connecting them to sensitive control circuits. This module is suitable for students, makers, engineers, educators, and startups who are working on electronics projects, automation systems, or prototypes that require dependable and safe power switching. This single channel power relay module is widely used in robotics, IoT applications, home automation, and industrial control projects where motors, lights, pumps, or appliances need to be switched on and off reliably. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, making integration simple for both learning projects and real-world systems. The sturdy design and consistent performance make it a practical choice for prototyping as well as final deployment in power control applications. Features: Single channel power relay module for high-current load switching Operates on 12V, suitable for automation and control applications Supports up to 10A load current for power devices Electrical isolation between control and load circuits for safety Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Compact and durable design for easy integration

Cytron UNO – Arduino UNO Compatible Board with USB Micro-B The Cytron UNO is a fully Arduino UNO compatible development board built with the reliable ATmega328P microcontroller, making it ideal for beginners, students, hobbyists, and electronics enthusiasts. Designed to offer the same functionality as the Arduino UNO R3, the Cytron UNO includes 14 digital I/O pins, 6 PWM outputs, 6 analog inputs, UART, SPI, I2C, and full R3 shield compatibility. With USB Micro-B connectivity, you can easily program the board using the same cable used for Android phones and power banks - making it more convenient and cost-friendly for modern makers. Cytron further enhances the board with a stronger onboard voltage regulator, improved power handling, and repositioned LEDs on the edge for better visibility, even when a shield is attached. The CT-UNO also includes extra standard pads for custom shields, an FTDI-based USB interface for stable programming, and robust DC input support from 7V to 15V. Whether you’re building IoT prototypes, robotics, embedded systems, or learning coding fundamentals, the Cytron UNO delivers reliability, ease of use, and full compatibility with the entire Arduino ecosystem. Features Powered by SMD ATmega328P with Optiboot (UNO R3) bootloader for fast programming. USB programming enabled by stable FTDI FT231X chip for improved reliability. Supports DC 7–15V input with upgraded onboard voltage regulator for higher output current. Offers 14 digital I/O pins, including 6 PWM outputs, and 6 analog inputs for versatile projects. Fully Arduino UNO R3 shield compatible with ISP header and broken-out SDA, SCL, IOREF pins. Uses USB Micro-B socket, compatible with standard Android phone cables. LEDs relocated to board edge for clear visibility during development. Includes additional 2.54mm pads for creating custom shields. White PCB design with clean layout and Cytron build quality. Dimensions

Cytron PS2 Shield for Arduino The Cytron PS2 Shield is a compact and reliable PS2 controller interface designed for Arduino boards, making remote control projects smoother and far more intuitive. Whether you're working with an Arduino Uno, Mega, Leonardo, or other compatible boards, this shield lets you easily integrate a wired or wireless PS2 controller into your robotics, DIY RC projects, or gaming-inspired builds. With simple UART communication and a plug-and-play connector, reading joystick inputs and button states becomes effortless, even for beginners. Built with developers and hobbyists in mind, the Cytron PS2 Shield provides flexible UART selection options, stackable headers for adding more shields, and support for vibration motors on PS2 controllers. Because it draws power directly from the Arduino board, setup stays clutter-free. This PS2 Shield is perfect for anyone looking to add remote control, robotics maneuvering, or wireless navigation to their Arduino-based projects using a familiar PS2 controller format. Features: Provides an easy and reliable interface for connecting wired or wireless PS2 controllers to Arduino boards. Supports multiple Arduino models including UNO, Mega, Leonardo, and other pin-compatible variants. Simple UART-based communication allows effortless reading of joystick and button states. Integrated support for controlling the PS2 controller’s vibration motor for enhanced feedback. Stackable headers enable additional shields to be mounted above the PS2 Shield without conflict. Jumper-based selection for baud rates (9600, 57600, 115200) and configurable UART TX/RX pins. Fully powered from the Arduino main board with low current consumption. Includes status LED and reset control via Arduino A1 pin for convenient operation.

SmartElex 8 Channel Multiplexer Breakout Module – (74HC4051) The SmartElex 8 Channel Multiplexer Breakout Module (74HC4051) is a compact and efficient solution for expanding input and output options in electronic projects. This 74HC4051 multiplexer breakout allows users to route multiple signals through a single microcontroller pin, solving the problem of limited I/O availability when working with sensors, switches, or analog inputs. It is designed for students, makers, engineers, educators, and startups who need a practical way to manage multiple device connections without increasing hardware complexity. This module acts as both an 8 channel multiplexer and demultiplexer, making it suitable for robotics, IoT systems, automation tasks, and rapid prototyping. It integrates smoothly with Arduino, Raspberry Pi, ESP32, and similar platforms, enabling users to scale projects without sacrificing performance or stability. Whether you are building sensor hubs, data acquisition systems, or experimenting with signal routing, this multiplexer demultiplexer module offers a reliable and easy-to-use interface that enhances flexibility in circuit design. Features: Based on the 74HC4051 8-channel analog/digital multiplexer IC Expands I/O by routing up to 8 signals through a single control interface Works as both a multiplexer and demultiplexer for flexible signal routing Helps manage limited microcontroller pins in multi-sensor projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, IoT systems, data acquisition, and prototyping

SmartElex BS612 PIR Motion Sensor Module The SmartElex BS612 PIR Motion Sensor Module is a passive infrared motion detection solution designed to sense human movement by detecting changes in infrared radiation. It helps automate electronic systems by enabling actions only when motion is detected, improving efficiency and reducing unnecessary power usage. This module is suitable for students, makers, engineers, educators, and startups who need a reliable motion sensing component for learning projects, prototypes, and embedded system designs. This PIR motion sensor module is commonly used in robotics, IoT devices, security systems, and home or industrial automation projects where accurate motion detection is required. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into working systems. The wide detection coverage and stable performance make it ideal for applications like motion-activated lighting, alarm systems, smart monitoring solutions, and interactive electronics projects. Features: Passive infrared (PIR) sensor for accurate human motion detection Detects movement by sensing changes in infrared radiation Wide 120° detection angle for broader area coverage Long sensing range suitable for security and automation use Low power consumption for battery-operated projects Compatible with Arduino, Raspberry Pi, ESP32, and similar microcontrollers

7Semi MAX31855 K-Type Thermocouple Amplifier Breakout The 7Semi MAX31855 Thermocouple Amplifier Breakout is designed for creators, engineers, and industrial users who need reliable and highly accurate temperature readings from extreme environments. With its advanced MAX31855 converter IC, this breakout allows effortless digital temperature measurement using K-type thermocouples, making it a powerful choice for applications like 3D printing, HVAC monitoring, and high-heat industrial systems. The onboard cold-junction compensation ensures precision by automatically correcting any thermal offsets at the connector. Supporting temperatures from -270°C to +1372°C, it delivers 14-bit resolution with smooth 0.25°C read steps, providing dependable, noise-free readings for sensitive processes. Built-in fault detection helps identify open circuits or shorts, making the system easier to troubleshoot and safer for continuous operation. With its SPI-based digital interface and compatibility with 3.3V/5V logic microcontrollers, the module integrates cleanly with Arduino, ESP32, Raspberry Pi, and industrial controllers. Features: Supports a wide thermocouple measurement range from –270°C to +1372°C, making it suitable for extreme heat and cryogenic applications. Provides 14-bit high-resolution output with precise 0.25°C increments for accurate temperature monitoring. Includes built-in cold-junction compensation, ensuring reliable compensation for ambient temperature fluctuations. Offers a simple SPI digital interface, requiring minimal I/O pins for easy integration with most microcontrollers. Compatible with multiple thermocouple types including K, J, N, T, S, R, and E, providing versatility in system design. Features fault detection for open thermocouples and shorts to VCC/GND to enhance system safety. Supports both 3.3V and 5V logic levels, ensuring broad compatibility across development boards.