EMAX RS2205 2300KV 2-4S Race Spec Brushless Motor Kit for Drones The EEMAX RS2205 2300KV Brushless Motor is a powerful and efficient brushless motor for drone applications, especially suited for FPV racing drones that demand speed and precision. Built with high-quality materials, it ensures long-lasting performance and smooth operation. This motor delivers exceptional thrust while maintaining excellent energy efficiency, making it a perfect choice for competitive drone pilots. Available in both clockwise (CW) and counterclockwise (CCW) variants, the brushless motor kit provides everything you need for a reliable and high-performance drone setup. Features: RaceSpec Brushless Motor comes with 2-4S LiPo batteries, making it suited for a variety of applications. Compact and lightweight design enables for simple installation in a variety of RC models. Made with high-quality materials to ensure durability and long-term performance.

Emax RS2306 2550 KV White Edition Race Spec Motor The Emax RS2306 2550 KV White Edition RaceSpec Motor is a high-performance brushless motor engineered for drone racers demanding top-tier power and precision. Building on the success of the RS2205-S, it features a lighter bell, hollowed steel shaft, and larger bearings, all while maintaining a sleek, low-profile design. This powerful drone motor delivers nearly double the thrust of the original Red Bottom, reaching up to 2kg with a 5045x3 propeller on 5S or a 6045x3 on 4S setup. Designed for reliability and responsiveness, the RS2306 sets a new benchmark in drone racing performance. Features: Larger stator for smooth, responsive power. 4mm hollow steel shaft is hardened and tempered for endurance. 0.15mm thick silicon-steel laminations for increased energy efficiency High-quality steel ball bearings with an inner diameter of 4mm. 1.8mm N48SH arc magnets for increased acceleration and less energy loss Special edition matte white bell design. Hex head bell fastener for quick maintenance or replacement. PROPLOCK base prevents propeller slipping Optimized 34g weight for balance of strength and performance.

EMAX Simon Series 20A 2-4S LiPo Brushless Electronic Speed Controller for Drones and RC Aircraft The EMAX Simon Series 20A Brushless Electronic Speed Controller is a high-quality ESC for drones and RC aircraft, designed to deliver smooth, responsive, and reliable performance. Powered by advanced SimonK firmware, this drone speed controller ensures superior throttle precision and flight stability. Compatible with 2–4S LiPo batteries, it supports a wide range of brushless motor configurations, making it ideal for FPV racing and aerial applications. With its compact, lightweight build and efficient power delivery, the EMAX Simon 20A electronic speed controller stands out as a dependable choice for hobbyists seeking performance and durability in every flight. Features: High quality components American-made (IR) MOSFETs provide consistent current and long-term durability. PCB is durable. To extend the life of the ESC, it is constructed with thick 5-oz. high-grade copper. Advanced Firmware. SimonK firmware improves throttle response and stability. Battery compatibility Supports 2-4S LiPo batteries for flexible power sources. Lightweight Design Compact and lightweight, excellent for drone enthusiasts looking for efficient and rapid motor control.

EMAX XA2212 820KV Outrunner Brushless DC Motor for Multirotors The EMAX XA2212 820KV Outrunner Brushless DC Motor is a high-performance motor built for drone enthusiasts seeking power, precision, and reliability. Crafted with premium bearings and high-quality silicone steel, this outrunner brushless motor delivers smooth, vibration-free operation while maintaining low temperatures even under load. Each motor undergoes rigorous lab testing to ensure consistent performance and durability, making it ideal for a wide range of multirotor configurations, including quadcopters, tricopters, and hexacopters. Whether you're upgrading your drone setup or building a new one, this brushless motor for drone guarantees exceptional efficiency and stable flight control backed by genuine EMAX engineering. Features: Vibration-free functioning. Very simple to setup. Produces less heat during operation. High-quality bearings ensure dependable operation. Imported silicon steel coils and high-quality magnets ensure a longer lifespan and improved performance.

ENC28J60 Ethernet LAN Module This ENC28J60 Ethernet LAN Network Module is a standalone Ethernet controller with a Serial Peripheral Interface (SPI) (SPI). It is intended to function as an Ethernet network interface for any SPI-equipped controller. The ENC28J60 Ethernet Breakout Board Module makes use of the new Microchip ENC28J60, a popular Ethernet Controller IC with a slew of features that can handle the majority of network protocol requirements. This Ethernet LAN module can be directly connected to the majority of microcontrollers. The network module communicates with the Arduino type board via the SPI protocol, making it ideal for projects involving the ARDUINO, PIC, AVR, or STM32. The ENC28J60 consists of seven major functional blocks: An SPI interface that serves as a communication channel between the host controller and the ENC28J60. Equips control registers for controlling and monitoring the ENC28J60. A dual port RAM buffer for received and transmitted data packets. An arbiter to control the access to the RAM buffer when requests are made from DMA, transmit and receive blocks. The bus interface that interprets data and commands received via the SPI interface. The MAC (Medium Access Control) module that implements the IEEE 802.3 compliant MAC logic. The PHY (Physical Layer) module that encodes and decodes the analog data that is present on the twisted-pair interface. Also check our lan cable , which is designed for connecting a PC to a Network HUB/Switch/Router/ADSL Broadband Router. Connecting The ENC28J60 Ethernet LAN Module To Arduino: Connecting The ENC28J60 Ethernet LAN Module To Arduino

RAMPS 1.4 Endstop Switch For RepRap Mendel 3D Printer With 70cm Cable This end stop switch for 3D printers comes along with a 70cms cable wire. They are used together to detect when an X/Y/Z stage has reached its minimum or maximum in a 3D printer. The endstop switch for 3D printers is manufactured with a standard 4 pin 100? pitch header and also features an LED on the board that will light up when the switch is activated. It using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.

Enviro Battery Kit for Apples, Tomatoes and Lemons Discover the scientific principles behind generating energy with the Enviro Battery Kit. This eco-friendly science kit incorporates common natural materials such as mud, lemons, and water to produce electricity, providing an inventive and educational experience. With comprehensive instructions included, you can learn how to make unique batteries using a variety of items such as fruit juices, vegetables, coins, and utensils. Expand your knowledge of sustainable energy and experiment with the Enviro Battery Kit. How Enviro batteries work The enviro battery operates by submerging one or more pairs of interconnected copper and zinc plates into mud, water, a potato, or a piece of fruit. The negative electrode is the zinc plate, while the positive electrode is the copper plate. When the metals are placed in the electrolyte, a chemical reaction occurs. The acid in the electrolyte decomposes the atomic structure of the copper and zinc, liberating individual electrons. Zinc, as a more reactive metal than copper, generates electrons more quickly in this chemical reaction, resulting in a surplus of electrons that flow from the zinc plate to the copper plate. The movement of electrons from a reactive metal to a less reactive metal creates a small current that is powerful enough to light a small bulb, power a tiny watch, or activate a sound chip. Possible Experiments: Potato power: make a potato powered clock Musical mud: make a sound-chip sing Water wonder: make a battery with water Paper clip party: make a paper clip battery Crazy coin: make a coin battery that sings Freaky fork: make a fork battery Lemon Battery for Science Projects For ages 10 and up Zinc and Copper Rods Bars Metals Wires for Science Projects Also check the 34 Experiments Electronics Kit offered by ROBOCRAZE. The kit is designed for electronics enthusiasts and beginners, offering 34 different experiments to explore the world of electronic circuits. It features a unique snap-together system, eliminating the need for tools or soldering. The components are color-coded and numbered, with silk-screened electronic symbols and voltage ratings for easy identification.

ERD 5V 2.4A adapter with MicroUSB cable This is an ERD fast charger adapter with 5V 2.4A capacity. ERD chargers comes with smart chip to protect your device from Short Circuit & Overload. They are compatiblw with Raspberry Pi boards for charging and connectivity. ERD Charger Specifictions Operating Voltage 5V Current 2.4A Compatibility Raspberry Pi 3, Raspberry Pi Zero Dimensions 5 x 4 x 3cms Weight 50 grams

Es-P06 IP44 PIR Infrared Motion Sensor Wall Mounted Outdoor Sensor Switch The ES-P06 IP44 PIR Infrared Motion Sensor Wall Mounted Outdoor Switch is an energy-saving switch that automatically turns on when it detects motion. It uses infrared technology to sense people entering its detection area, making it perfect for outdoor use. The sensor can tell whether it’s day or night and works without needing manual control. It’s easy to install, and it shows power and detection status. This practical and safe sensor is ideal for outdoor areas, helping save energy while providing reliable performance.

ES08MA II 12g Metal Gear Micro Servo The ES08MA II Metal Gear Micro Servo is a compact and powerful servo motor designed for precision control in RC planes, helicopters, and robotics applications. Built with durable metal gears, it delivers a strong torque of 1.8 kg·cm and a quick response time of just 0.10 seconds per 60° at 6V. Its smooth motion, reliability, and compact 12g design make it a perfect choice for hobbyists and engineers who need both speed and strength in tight spaces. Operating efficiently within a voltage range of 4.8V to 6.0V, this micro servo ensures consistent performance even under demanding conditions. The 25cm cable with Futaba/JR-compatible connector provides flexibility and easy integration into most RC and DIY control systems. Whether used for model aircraft, small robots, or mechanical arms, the ES08MA II offers precision, responsiveness, and durability at a great value. Features: Compact and lightweight 12g micro servo for small-scale projects. Strong torque output of 1.8 kg·cm at 6V for powerful motion control. Fast rotation speed of 0.10 sec/60° for quick and precise operation. Equipped with durable metal gears for extended lifespan and reliability. Wide operating voltage range of 4.8V to 6.0V for flexible usage. Compatible with Futaba/JR plug standards for easy connectivity. Ideal for RC planes, 450 helicopters, robotics, and DIY servo-based projects.