TCRT5000 IR Sensor The TCRT5000 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package that blocks visible light. The package includes two mounting clips. This sensor is often used for line-follower robots. TCRT5000 Reflective Optical Sensor IR Infrared Switch is perfect for line tracking robot car like DIY projects When the infrared transmitter emits a beam of light to a piece of paper, if the rays shine on a white surface, they will be reflected and in turn, be received by the Infrared detector, and pin S on the module will output a low-level; If the beam of light encounters a black line, they will be absorbed, thus the Infrared detector gets nothing, and pin S will output a high level. So this module basically acts like a simple switch when it gets close to a white/black object. You can adjust the sensitivity with the potentiometer on the module. Applications of TCRT5000 IR Sensor: Position sensor for shaft encoder. Detection of reflective material such as paper, IBM cards, magnetic tapes, etc. Limit switch for mechanical motions in VCR.

TCRT 5000 IR Sensor Module The TCRT5000 IR reflective sensor Module uses TCRT5000 IR Sensor to detect color and distance. This sensor module consists of an IR transmitter & an IR receiver. IR Transmitter continuously emits an IR signal which is then reflected by an obstacle and is then detected by the IR receiver. TCRT5000 Infrared Reflective Sensor Module is often used in line following robots, object sorting Robot because this module can sense if a surface is white or black. The measuring distance range from 1mm to 8mm, and the central point is about 2.5mm. There is also an onboard potentiometer to adjust the sensitivity. The infrared diode will be emitting the infrared continually when the module is powered ON when the emitted infrared light has not been reflected or the strength is not big enough, the receiver diode will be in the off state, and the output pin i.e. DO will be LOW. Read our blog Proximity Sensor Types where we explained what is a proximity sensor, different types of Proximity Sensors, and their working principle. Applications: Position sensor for shaft encoder Detection of reflective material such as paper, IBM cards, magnetic tapes etc. Limit switch for mechanical motions in VCR Also check TCRT5000 IR Sensor(pack of 5) The sensor is a reflective type, consisting of an infrared emitter and phototransistor in a leaded package that blocks visible light. read our blog explaining the application of ir sensor , which provides comprehensive information on the working principles of infrared (IR) sensors, detailing their significance across various technological domains.

TCS34725 RGB Color Sensor The TCS34725 Color Sensor RGB Module provides digital return values for red, green, blue (RGB), and bright light sensing digital Mingguang induction return values. Color-sensitive photodiode integrated cut and localized infrared shading filter, to minimize the incident infrared spectrum components. It has high sensitivity, wide dynamic range, and IR shading filters. The TCS3472 is ideal for color-sensitive component solutions under varying light conditions and through attenuating materials. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimize the IR spectral component of the incoming light and allows color measurements to be made accurately. The filter means you’ll get much truer color than most sensors since humans don’t see IR. The sensor also has an incredible 3,800,000:1 dynamic range with adjustable integration time and gain so it is suited for use behind darkened glass. High sensitivity, wide dynamic range and an infrared light blocking filter makes TCS3472 Sensor become ideal for lighting conditions change and through color sensitive element attenuating materials under conditions of a solution. Also check APDS 9960 RGB And Gesture Sensor . Read our blog about what is light sensors . Features: Measures RGB and clear light. IR filter for accurate color. Built-in white LED for stable lighting. High sensitivity, adjustable settings. I2C interface for easy microcontroller use. Interrupt output for light thresholds. Compact and lightweight. Applications: Color Detection Ambient Light Sensing Industrial Process Control Food Processing Medical Diagnostics RGB LED Control Consumer Electronics Health and Fitness Devices

TDA 2030A Audio power Amplifier Module Want to increase the audio output capability of your project? Well, then this is the perfect module for you. This module is based on the famous TDA2030A Audio Amplifier Module which is capable of 18-watt power output with very low harmonic distortion. This TDA2030A audio amplifier circuit, often using V-5-pin single in-line plastic package structure. Also check the NE555 Multi-Channel Waveform Generator Module available on Iotcart. Priced at Rs. 465 with an 18% discount from the original Rs. 568, the module operates on a DC input of 6-12V. It features a color ring resistor with values of 1k?, 1m?, 4.7k?, 10k?, 15k?, and 100k?. The module can generate square waves, sawtooth waves, triangle waves, and sine waves, with the waveform output selected by a jumper. Also check TDA8932 digital power amplifier board . It is a compact and efficient board that can deliver 35W of mono audio. It is suitable for a variety of audio applications, including active speakers, DIY projects, and electro-acoustic projects.

TDA8932 Digital Power Amplifier Board The TDA8932 Digital Power Amplifier Board is the perfect solution for audio enthusiasts and DIY project builders. This compact module, equipped with the high-performance TDA8932 chip, offers outstanding sound quality and efficiency. With an output of 35W in mono, it's ideal for active speakers, electro-acoustic projects, and various audio applications. The TDA8932 chip ensures high efficiency and minimal power consumption, making it an excellent choice for audio applications. Its compact size allows for easy integration into your projects, and you won't need additional radiators for installation. Whether you're looking to enhance the performance of your passive speakers or embark on audio product development, this amplifier board is the right choice. It's suitable for a wide range of applications, and its great sound quality ensures an excellent audio experience. Upgrade your audio projects with the TDA8932 Digital Power Amplifier Board. Buy now and enjoy the benefits of high efficiency and top-notch sound quality. Also check the TDA 2030A Audio Power Amplifier Module available on Iotcart. it features a mono channel 18W power amplifier circuit design. The module includes an onboard TDA2030A audio amplifier IC, a horn socket, and a 10k adjustable resistance for volume adjustment.

TEC1 12706 Peltier Module The TEC1-12706 6A Thermoelectric Cooler Peltier Module is the simple application of the Peltier Thermoelectric Effect. The Peltier module features 127 semiconductor couples in the area of 40 x 40mm which very effectively cools and heats up to 90°C. The thermoelectric cooler or TEC or Peltier module creates a temperature differential on each side. One side gets hot and the other side gets cool. They use to either warm something up or cool something down; above all, you can use either side. You can also take advantage of a temperature differential to generate electricity. A thermoelectric cooler (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely useful in industrial areas, for example, computer CPUs, CCDs, portable refrigerators, medical instruments, and so on. Tips: Operating Temperature: 138 Degree C. Do not exceed Imax or Vmax when operating a module. Please carry out moisture protection options (sealing) in final application use. Life expectancy: 200,000 hours. Failure rate based on long-time testing: 0.2%. Read our blog Peltier module working principle. Applications: Computer CPUs CCDs Portable refrigerators Medical instruments Also check DIY semiconductor cooling kit that includes a TEC1-12706 Thermoelectric Cooler Peltier Module.

TEC1-12715 Peltier Module The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. The module features 127 semiconductor couples in the area of 40mmx40mm. Thermoelectric coolers are also known as TEC or Peltier modules create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. The module features 127 semiconductor couples in the area of 40mmx40mm. The TEC1-12715 Thermoelectric Peltier Cooler Module works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPUs, CCDs, portable refrigerators, medical instruments, and so on. read our blog explaining Peltier module working , It explains the working principle of a Peltier Module, which involves transferring energy between two metals through electrical current. TEC1-12715 Peltier Module Operating Tips: Do not exceed Imax or Vmax when operating a module. Please carry out moisture protection options (sealing) in final application use. Life expectancy: 200,000 hours. Failure rate based on longtime testings: 0.2%. Read our blog Peltier module working principle where we explained what is a Peltier Cooler, how it works, things to keep in mind while using a Peltier, and applications of Peltier. Applications: Industrial areas Computer CPU CCDs Portable refrigerators Medical instruments

Teensy 4.0 Development Board The Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with an NXP iMXRT1062 chip, the fastest microcontroller available today – ten times faster than the Teensy 3.2! The NXP iMXRT1062 is a ‘cross-over’ processor, which has the functionality of a microcontroller, at the speeds of a microcomputer. It’s perfect for when you need tons of flash, RAM and, crunch lots of data, or when you need two full-speed USB ports. It even has a graphics processor! All this for two sawbucks. When running at 600 MHz, Teensy 4.0 consumes approximately 100 mA current. Teensy 4.0 provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.0 hardware and Teensyduino’s software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino’s extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed. Teensy 4.0 also provides a power shut-off feature. By connecting a pushbutton to the On/Off pin, the 3.3V power supply can be completely disabled by holding the button for 5 seconds and turned back on by a brief button press. If a coin cell is connected to VBAT, Teensy 4.0’s RTC also continues to keep track of date & time while the power is off. Teensy 4.0 also can also be overclocked, well beyond 600 MHz!

Teensy 4.1 Development Board The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with an NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size and shape as the Teensy 3.6 (2.4in by 0.7in) and provides greater I/O capability, including an ethernet PHY, SD card socket, and USB host port. When running at 600 MHz, this Teensy board consumes approximately 100mA current and provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.1 hardware and Teensyduino’s software support for Arduino timing functions are designed to allow dynamic speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and Millis (), and Teensyduino’s extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed. Teensy microcontroller 4.1 also provides a power shut-off feature. By connecting a pushbutton to the On/Off pin, the 3.3V power supply can be completely disabled by holding the button for five seconds and being turned back on by a brief button press. If a coin cell is connected to VBAT, this board's RTC also continues to keep track of the date & time while the power is off. Teensy 4.1 also can also be overclocked, well beyond 600MHz! Teensy 4.1’s Cortex-M7 processor includes a floating-point unit (FPU) that supports both 64-bit “double” and 32-bit “float”. With M4’s FPU on Teensy 3.5 & 3.6, and also Atmel SAMD51 chips, the only 32-bit float is hardware accelerated. Any use of double, double functions like log(), sin(), and cos() means slow software-implemented math. The 4.1 Teensy development board executes all of these with FPU hardware. Features ARM Cortex-M7 at 600MHz 1024K RAM (512K is tightly coupled) 8 Mbyte Flash (64K reserved for recovery & EEPROM emulation) USB Host Port 2 chips Plus Program Memory 55 Total I/O Pins Cryptographic Acceleration Random Number Generator RTC for date/time Programmable FlexIO Pixel Processing Pipeline Peripheral cross triggering Power On/Off management Pin diagram Applications: Ideal for robotics, automation, and motor control systems. Suitable for audio processing, DSP, and real-time audio manipulation applications. Best for data logging and acquisition systems. Enables IoT devices, web servers, and networked sensors. Suitable for secure communication and data encryption applications. Ideal for image processing, computer vision, and display systems. Provides versatility for interfacing with sensors, actuators, and peripherals. Allows for the development of tailored embedded systems and prototypes. All about Teensy 4.1 Development Board

PTFE Teflon Tubing for 3D Printers 1.75mm Filament (2mm ID X 3mm OD) The  2x3mm Teflon Tubing – For 3D Printers 1.75mm Filament good corrosion resistance and high insulation resistance. High or low-temperature resistance. It has unique lubricity and the surface is no sticky. PTFE Teflon Tube for 3mm 3D Printer Filament has 2mm inner diameter and 3mm outer diameter. PTFE Tube to get the best printing performance out of your 3D Printer. It increases print quality, reduces filament jams, and improves retraction. Durable using in the atmosphere and protect itself from being aged. Non-inflammability and made of PTFE material. check out : 1.75mm Blue PLA Filament -1Kg