3.5in TFT LCD Shield for Arduino The 3.5" TFT LCD Display Shield for Arduino has been fully assembled, tested, and is ready to use. Install the TFT display without any wiring or soldering! Simply plug it in and load a library; you'll be up and running in less than 10 minutes! It works best with any traditional Arduino ATMEGA328 board. So add a beautiful display shield with a built-in microSD card connection to your Arduino project. This TFT LCD is large (3.5?? diagonal), bright (4 white LED backlights), and colorful (262,000 different shades)! The TFT display has 480x320 pixels and individual pixel control. It has a significantly higher resolution than a black and white 128x64 display. Check out Best 3.5-inch Touch Screen for Raspberry Pi Precautions while using the 3.5in TFT LCD Display Shield The control and driving circuit of this display module is low voltage and the FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is irreparable damage, and sometimes humans have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity: Using soldering iron or power FRIDA tools must be well grounded and operate, make them without leakage. Do not use your hand to touch the leads, circuit boards and metal boxes. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity; When the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,or make human body be well grounded. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing. Electrostatic damage or man-made damage is not within the scope of the warranty. Features: Arduino 3.5" diagonal TFT LCD Display Shield. Fully assembled, tested, and operational. Installation doesn't involve any wiring or soldering. Optimally functions with conventional Arduino ATMEGA328 boards. Has an integrated microSD card slot. Big display with a diagonal dimension of 3.5". Four white LED backlights make it bright. Vibrant with 262,000 distinct tones. 480x320 pixels at a high resolution with individual pixel control. Supports Arduino compatible boards, PIC, STM32, and AVR boards. Applications: DIY projects that require visual displays. Arduino-compatible gadgets and devices. Embedded systems. Prototyping User Interfaces. Creating Interactive Artworks. Educational presentations and experiments. Data-logging and visualization projects. Environmental monitoring systems. Games and entertainment apps. Displays used for industrial control and automation. Interfacing 3.5 INCH TFT Display Shield with Arduino

3.5in TFT LCD Shield for Arduino The 3.5" TFT LCD Touch Display Shield for Arduino has been fully assembled, tested, and is ready to use. Install the touch display without any wiring or soldering! Simply plug it in and load a library; you'll be up and running in less than 10 minutes! It works best with any traditional Arduino ATMEGA328 board. So add a beautiful touchscreen display shield with a built-in microSD card connection to your Arduino project. This TFT display is large (3.5?? diagonal), bright (4 white LED backlights), and colorful (262,000 different shades)! The TFT display has 480x320 pixels and individual pixel control. It has significantly higher resolution than a black and white 128x64 display. As an added bonus, this TFT display includes a resistive touchscreen, allowing you to detect finger presses anywhere on the screen. Precautions while using the 3.2in TFT LCD Display Shield The control and driving circuit of TFT display modules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity: Using soldering iron or power FRIDA tools must be well grounded and operation, make them without leakage. Do not use hand to touch the leads, circuit boards and metal boxes. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity; When the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,or make human body be well grounded. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing. Electrostatic damage or man-made damage is not within the scope of the warranty. Pinout of 3.5in TFT LCD Shield for Arduino:

3.5inch Touch Screen LCD Display for Raspberry Pi This is the 3.5-inch touchscreen LCD for Raspberry Pi , which supports HDMI input, and a refresh rate of 60FPS or more. It has a physical resolution of 480x320 and a configurable software resolution of up to 1920x1080.  This RPI display can be used as a R aspberry Pi touchscreen with a touch control function (need to install a touch drive). The 3.5 inch TFT lcd display also can be used as a computer monitor, TV box, PSP, and other standard HDMI output devices (without touch function). The 3.5" display module only works with 3b and 3b+. If you want to use this 3.5 inch capacitive touch screen then you will need a few handy components like Raspberry Pi b oards , power supply , cables , SD cards . Features: Resolution: 320×480 pixels Touch Control: Resistive touchscreen Compatibility: This 3.5 inch HDMI display best for Raspberry Pi 4B, 3B, and 3B+ Interface: Uses SPI (Serial Peripheral Interface) for communication Driver Support: Compatible with Raspbian. Size: Fits perfectly on top of the Raspberry Pi Colors: Displays up to 65,536 colors Backlight: LED backlight for better visibility Power Consumption: Low power consumption Applications: Portable Projects Developing Touch-Based Interfaces Educational Tools Home Automation Gaming Consoles IoT Dashboards Media Centers How to Install? Procedure to Flash SD Card: Step 1: Extract the OS image file from the zip(Refer Additional resources section) Step 2: Download Balena Etcher software Step 3: Flash the SD Card using the Balena Etcher software

3.5mm Male Female Banana Plug Bullet Connector These 3.5mm gold connectors are very compact which makes them ideal for many applications, especially good for multi-rotors, this type of connector is also very good for where you are constantly plugging in and unplugging. These gold connectors are well machined and gold plated with a rear side-cut for easy soldering.

3.6/3.7V Dual 18650 Rechargeable Lithium Battery Charger The Dual 18650 Rechargeable Lithium Battery Charger is an easy way to charge your 18650 batteries for cameras, camcorders, radios, and more. It’s wireless, has a U.S. plug, and can charge two batteries at the same time.

3.6A 5V White Adapter- Type C 5V 3.6A Adapter with a Type C cable can be used to charge mobile phones or other small electronic devices via Type C connection (3.6A) simultaneously. Universal compatibility with a wide range of devices like SmartPhones, Tablet PC, iPhone, iPad, MP4 Players, PSP, GPS, BlueTooth devices, Jetson Nano, etc.

3.6A 5V White Adapter-Micro USB 5V 3.6A Adapter with a micro USB cable can be used to charge mobile phones or other small electronic devices via USB connection (3.6A) simultaneously. Universal compatibility with a wide range of devices like SmartPhones, Tablet PC, iPhone, iPad, MP4 Players, PSP, GPS, BlueTooth devices, Jetson Nano, etc.

3.7V 1200mAh 18650 Battery The 18650 battery is a rechargeable lithium-ion battery with a capacity of 1200mAh and a voltage of 3.7V. It measures 18mm in diameter and 65mm in length and is commonly used in a variety of electronic devices such as flashlights, headlamps, doorbells, RC cars, and cameras. When selecting a 18650 battery, it is essential to ensure that it is compatible with your device and that it comes from a trustworthy brand to ensure safety and quality. This attention to detail guarantees both safety and quality. check out : 3.7V 2600mAh 18650 Battery Features: Small size and easy to use Great capacity and discharge rate Long life High energy density Long battery life Compact and powerful check out : Rechargeable 9 Volt battery MP 9v battery 300mAh Applications: Flashlights: The 3.7V 1200mAh 18650 Battery is commonly used in flashlights for reliable and long-lasting power. Headlamps: It provides a dependable power source for headlamps, ensuring consistent performance. Doorbells: The battery is suitable for powering electronic doorbells, offering a compact and powerful energy solution. RC Cars: It is commonly used in remote-controlled cars (RC cars) for efficient and reliable performance. Cameras: The battery is compatible with cameras, providing a stable power supply for photography equipment. Also check the 18650 2 CELL HOLDER available on the Iotcart website. It is a battery holder designed to accommodate two 18650 batteries, providing a total output voltage of 7.2v.

3.7V 1500mAh 18650 Battery This 3.7V cylindrical Li-ion rechargeable battery, known as the 18650 battery, offers a power current capacity of 1500mAh. With its reliable performance and long service life, it can be recharged repeatedly. The battery features plastic insulation on its outer part, while its inner part is constructed from high-carbon steel to provide protection against bursting and overheating. These characteristics make the 18650 li ion battery highly sought after due to its affordability and low maintenance requirements. If you seek a strong, reliable, and cost-effective battery with a capacity of 1500mAh, this option may be the ideal choice for you. Features: Pollution-free Long service life No memory effect High energy density Lightweight, small size Good consistency and low self-discharge. High working voltage for single battery cells. High energy density Low self-discharge rate

3.7V 1500mAH LiPo Rechargeable Battery Model UK-523450P Hey! Check out our 3.7V 1500mAh LiPo Rechargeable Battery Model UK-523450P. It's thin, light, and powerful, with a 1500mAh capacity. Perfect for all your gadgets like GPS devices, DVD players, iPods, tablets, MP4 players, and Bluetooth speakers. Whether you're working on DIY projects or need a reliable battery for industrial uses, mobile backups, or IoT devices, this battery is a great choice. Give it a try and keep your projects running smoothly!