A2212 1400KV BLDC Motor and Simonk 30A ESC for RC Drones The A2212 1400KV BLDC ( Brushless DC )Motor is a brushless motor designed for quadcopters and multi-rotors, which comes with a Simonk 30A Electronic Speed Controller . It has exceptional performance, superpower, and efficiency. The 30A BLDC ESC is used to drive motors that consume current up to 30A. It is made for quadcopters and multicopters to provide faster and better motor speed control. This A2212 1400kv BLDC motor is equipped with a solid metal case and comes with a pre-soldered good-quality connector for a fast and direct connection between ESC and the motor. The A2212 10T, 13T 1400Kv Brushless Motors for Drone, and SimonK 30A BLDC ESC is a very popular combination designed for quadcopters and multi-rotors ideal with 8 to 10-inch propellers. If you want to Build a Quadcopter of your own you can do it too. For that you need S.no Component 1 Drone frames 2 Flight Controller (FC) 3 RC transmitter & receiver 4 Power Distribution Board 5 Propellers 6 Battery and charger To find these parts at an affordable rate you can check our Drone parts collection page. Applications: Drones Quadcopters Multirotors RC Airplanes UAV

A2212 1400KV BLDC Motor and Simonk 30A ESC with 1045 Propellers for RC Drones The product pack features a 1400kv brushless motor, SimonK 30A ESC, and a set of 1045 propellers. The 1400KV brushless motor for drones and quadcopters is constructed with a solid metal case that is capable of withstanding tough weather conditions. The solid metal case of the brushless motor is made with a steel design that makes the drone motor reliable and strong. The A2212 brushless drone motors are integrated with good-quality pre-soldered connectors. This helps users to easily connect to the ESC. The SIMONK 30A ESC is specifically designed to provide a faster and better flight experience for drones, quadcopters, and multi-rotor systems. The characteristic feature of the Simonk ESC is that it has protection against backward polarity and protection for the 5V receiver line. What this means for the user is that, even if you attach a battery backward, accidentally, this protection feature will not destroy the motor controller and other BECs. The set of 1045 drone propellers is manufactured with an epoxy resin cover. They are a set of strong and lightweight propellers that are well-suited for lower RPM motors and slow-flying drone models. The 1045 propeller set includes one anti-clockwise and one clockwise propeller. The propellers are designed to provide the best aerodynamic efficiency and great lifting capacity. Note : The package weighs 200 grams (approx) and Dimensions: 15 x 9 x 5cms (approx) Experience smooth power delivery with the SimonK 30a BLDC ESC .

A2212 2200KV 6T Brushless Outrunner Motor Aircraft Quadcopter Helicopter The A2212 2200Kv BLDC motor is a brushless outrunner motor specifically made for quadcopters and multi-rotors. It provides high performance, superpower, and brilliant efficiency. These brushless DC motors are perfect for medium-sized quadcopters with 8-inch to 10-inch propellers. These 2200KV brushless DC motors can be used to build powerful and efficient quadcopters. They come with mounting bolts, prop adapters, and power leads. If you want to Build a Quadcopter for your own you can do it too. For that you need S.no Component 1 Drone frames 2 Flight Controller (FC) 3 ESC or Electronic Speed Control 4 RC transmitter & receiver 5 Power Distribution Board 6 Propellers 7 Battery and charger About BLDC Motor: BLDC Motor (Brushless direct current electric motors), also known as electronically commutated motors, are available (ECMs, EC motors). Primary efficiency is a critical feature of BLDC motors. Because the rotor is the sole magnet bearer and does not require any power. That is, there are no connections, no commutator, and no brushes. Instead, the motor makes use of control circuitry. BLDC motors use controllers, rotary encoders, or a Hall sensor to detect where the rotor is at any given time. Outrunner: The field magnet is a rotating drum rotor that revolves around the stator. This style is preferred for applications that require high torque but do not require high rpm. These are the motors found on photography multirotors, such as high-powered drones. Brushless DC motors(BLDC) look different depending on who makes them, but they are typically short and stout. Brushless multirotor propellers are almost always mounted directly to the motor shafts. Pros: BLDC motor or Brushless DC motors are extremely powerful and provide excellent torque without the use of gears. They also have a long lifespan if properly maintained. Brushless motors can operate for much longer periods of time without suffering heat damage than coreless motors (the heat may temporarily reduce the performance of brushless motors, to a degree, but once they cool down, their performance should revert to normal.) Browse the exclusive collection for Drone Propellers . Features: KV Rating: 2200KV, indicating the motor’s RPM per volt applied. Voltage: Suitable for 2-3S Li-Poly batteries. Dimensions: Approximately 27.7mm x 27mm. Output Shaft Diameter: 3.17mm. Weight: About 50 grams. Material: Made of durable metal. Efficiency: High efficiency and strong anti-interference ability. Heat Dissipation: Equipped with an independent heat sink for better heat dissipation. Safety Features: Safe power-on function and throttle stroke adjustment. Applications: Drones Quadcopters Multirotor's RC Airplanes UAV

A2212 2450KV BLDC Motor for RC Drones and Quadcopters This is A2212 (BLDC) Brushless DC Motor of 2450KV, a high-speed brushless motor designed specifically for Quadcopters, Drones , or toy planes. This brushless DC motor is an outrunner-type motor, which means that the outside case rotates while the inside stays fixed. This A2212 2450Kv brushless motor is perfect for small DIY drones and planes. The 2450Kv brushless motor is best used by DIY enthusiasts and hobbyists when the drone or quadcopter project involved is a low-cost project. You can use this brushless motor when there is a 3 phase connection in order to control the the speed of motor more accurately and smoothly. If you want to Build a Quadcopter for your own you can do it too. For that you need S.no Component 1 Drone frames 2 Flight Controller (FC) 3 ESC or Electronic Speed Control 4 RC transmitter & receiver 5 Power Distribution Board 6 Propellers 7 Battery and charger About BLDC Motor: BLDC Motor (Brushless direct current electric motors), also known as electronically commutated motors, are available (ECMs, EC motors). Primary efficiency is a critical feature of BLDC motors. Because the rotor is the sole magnet bearer and does not require any power. That is, there are no connections, no commutator, and no brushes. Instead, the motor makes use of control circuitry. BLDC motors use controllers, rotary encoders, or a Hall sensor to detect where the rotor is at any given time. Outrunner: The field magnet is a rotating drum rotor that revolves around the stator. This style is preferred for applications that require high torque but do not require high rpm. These are the motors found on photography multirotors, such as high-powered drones. Brushless DC motors(BLDC) look different depending on who makes them, but they are typically short and stout. Brushless multirotor propellers are almost always mounted directly to the motor shafts. Pros: BLDC motors or Brushless DC motors are extremely powerful and provide excellent torque without the use of gears. They also have a long lifespan if properly maintained. Brushless motors can operate for much longer periods of time without suffering heat damage than coreless motors (the heat may temporarily reduce the performance of brushless motors, to a degree, but once they cool down, their performance should revert to normal.) Find out our various collections of ESC for Drones . Features: High KV Rating: 2450KV, which means it spins at 2450 RPM per volt. Brushless Design: Offers better efficiency and longer lifespan compared to brushed motors. High Performance: Suitable for high-speed applications in RC aircraft and quadcopters. Lightweight: Designed to be lightweight, making it ideal for aerial applications. Durable Construction: Built to withstand the demands of high-speed flight. Versatile Use: Can be used in various RC models like fixed-wing aircraft, quadcopters, and hexacopters. Shop the SimonK 30a BLDC ESC for ultimate motor control. Applications: Drones Quadcopters Multirotor's RC Airplanes UAV

A3967 Stepper Motor Driver This A3967 Stepper Motor Driver For Arduino is the most recent version of EasyDriver v44, which was created in collaboration with Brian Schmalz. When compared to previous versions, it offers more flexibility and control over your stepper motor . It is a simple stepper motor driver that is compatible with most microcontrollers and capable of producing a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). A 7V to 30V power supply is required for the module's motor. The digital interface is powered by an onboard voltage regulator that can be set to 5V or 3.3V. The A3967 is a full-featured microstepping motor driver with an integrated transistor. It is intended for use with bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capabilities of 30 V and 750 mA. The A3967 comes with a fixed off-time current regulator that can operate in slow, fast, or mixed current-decay modes. This current-decay control scheme produces less audible motor noise, higher step accuracy, and lower power dissipation. The transistor is essential to the A3967's simple implementation. Simply sending one pulse to the STEP input causes the motor to move one step (full, half, quarter, or eighth depending on two logic inputs). It is not necessary to programme phase-sequence tables, high-frequency control lines, or complex interfaces. The A3967 interface is ideal for applications where a complex P is either unavailable or overburdened. Features: A3967 microstepping driver Adjustable current control from 150mA/phase to 750mA/phase MS1 and MS2 pins are broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) Compatible with 4, 6, and 8-wire stepper motors of any voltage Breadboard-compatible pins.

A4988 Stepper Motor Driver Module with Heat Sink For 3D Printer (Green) The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. There are no phase sequence tables, high-frequency control interface programming, etc. The application of the A4988 interface is very suitable for a complex microprocessor is not available or overloaded. In the stepping operation, the chopping control in the A4988 automatically selects the current decay mode (slow or mixed). The mix decay current control scheme can reduce the audible motor noise, increase step accuracy, and reduce power consumption. Provide internal synchronous rectification control circuitry, in order to improve the pulse width modulation (PWM) power consumption during operation. Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO), and crossover current protection. Don’t need special power-up sequencing. A4988 uses a surface mount QFN package (ES), the size is 5 mm × 5 mm, nominal overall package height is 0.90 mm, with an exposed thermal pad to enhance the heat dissipation function. If you want to control the stepper motor with the stepper motor driver, for that you will need a few essential components like Arduino Breadboard jumper wires batteries or power supply Features: Automatic current decay mode detection/choice. Mixed with slow current decay mode. The low power dissipation of synchronous rectifier. Internal UVLO(ultra voltage lockout). Crossover current protection. Thermal shutdown circuit. Ground fault protection. Loading and short circuit protection. The optional five-step mode: full, 1/2, 1/4, 1/8, and 1/16.

A4988 Stepper Motor Driver Module with Heat Sink For 3D Printer (Red) A4988 Stepper Motor Driver is a complete micro-stepping motor driver with a built-in translator for easy operation. The product can be full, half, 1/4, 1/8, and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one micros tep. No phase sequence tables, high-frequency control lines, or complex interfaces to programming. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. The micro-step operation, the chopping control in the A4988 automatically selects the current decay mode (Slow or Mixed). In the mixed decay mode, the device is initially set to fast decay in the part of the fixed off-time, then a slow decay in the rest of the downtime. Mixed-decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry to improve the pulse-width modulation (PWM) power consumption when operating. Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossover current protection. Special power-Sort. If you want to control the stepper motor with this motor driver, you will need a few essential components like Arduino , breadboard, jumper wires, batteries, and power supply. Features: Simple step and direction control interface Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Automatic current decay mode detection/choice. Mixed with slow current decay mode Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates check out : Stepper Motor Driver Expansion Board

A6 GSM Module The GPRS Pro Serial A6 GPRS GSM Module Core DIY Development Board is a professional-grade development board that allows you to create your own IoT projects using the GPRS A6 module. The board supports dual-band GSM/GPRS networks and can be used to send and receive SMS messages, make and receive phone calls, and connect to the internet using GPRS. The board is small and compact, making it ideal for portable projects, and it has a low power consumption, so you can use it for extended periods of time without having to worry about running out of power. The board communicates with a microcontroller via UART port and supports a variety of commands, including GSM 07.07, GSM 07.05, and Ai-Thinker enhanced AT Commands. Features: Supports quad-band GSM/GPRS networks (850/900/1800/1900MHz) Working voltage: 4.8-9VDC Working current: maximum of 2A Sleep current: 5mA Onboard Micro SIM card holder Onboard Micro USB interface for external power supply Communication interface: TTL serial port / RS232 serial port Baud rate: 115200bps and it can also be set by AT command Interface logic voltage: 3.3V Can make and answer phone calls using a headset and electret microphone Can send and receive SMS messages Can send and receive GPRS data (TCP/IP, HTTP, etc.) Can be used to test the Ai-Thinker GPRS A6 module Pin pitch: 2.54mm Onboard antenna interface: SMA and IPX The GPRS Pro Serial A6 GPRS GSM Module Core DIY Development Board is a powerful and versatile tool that can be used to create a wide variety of IoT projects. If you're looking for a way to add cellular connectivity to your project, the GPRS Pro Serial A6 GPRS GSM Module Core DIY Development Board is a great option.

A7670C GSM 4G Breakout Board - ADIY The A7670 series is the LTE Cat 1 module that supports wireless communication modes of LTE-TDD/LTE-FDD/ GSM/GPRS /EDGE. It supports a maximum 10Mbps downlink rate and a 5Mbps uplink rate. The A7670 series adopts an LGA form factor and is compatible with SIM7000/SIM7070 series(NB/Cat Modules), and SIM800A/SIM800F(2G modules), which enables smooth migration from 2G/NB/Cat M products to LTE Cat 1 products, and greatly facilitates more compatible product design for the customer needs. The A7670 series supports multiple built-in network protocols, supports drivers for main operation systems(USB driver for Windows, Linux, and Android, etc.), and software function, AT commands are compatible with SIM7500/SIM7600 series modules. Meanwhile, the A7670series integrates main industrial standard interfaces, with powerful expansibility, including abundant interfaces such as UART, USB, I2C, and GPIO, which is suitable for main IOT applications such as telematics, surveillance devices, POS, industrial routers, and remote diagnostics etc. Pinout: Pinout A7670C GSM 4G Breakout Board Features: Serial interface Based on the SIMCOM A7670C LTE modem Supports LTE-TDD/LTE-FDD wireless communication modes Maximum downlink rate of 10Mbps and uplink rate of 5Mbps Compact size Applications: IoT applications Telematics Surveillance Devices POS, Industrial Routers Remote Diagnostics

AA Battery AA batteries are common in portable electronic devices. An AA battery is composed of a single electrochemical cell that may be either a primary battery (disposable) or a rechargeable battery .