PC4-M5 Pneumatic Push in Bowden Extruders for 1.75mm This PC4 M5 Bowden Connector is used in 3D printers with 1.75mm Bowden-style extruder assemblies, to provide a cool, safe, and neat path for the filament to travel. This ensures that it reaches the hotend assembly without any problems, which translates to better quality prints and greater consistency. The connector utilizes a John Guest fitting, which tightens with tension, to ensure that it maintains a firm grip on the tubing. It’s easy to see why this connector is such a popular choice for Bowden-style extruders, as their compatibility and high corrosion resistance make it a valuable investment for 3D Printing.

PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting The PC6-01 Pneumatic Push in Bowden Extruder for 3 mm J-Head fitting is a small part that connects the PTFE tubing to 1.75 mm Filament extruder assemblies on 3D Printers. It is compatible with the standard up to 3 mm ID PTFE Tubing, with a thread that universally fits M10 extruder fittings. This PC6- 01 Bowden Connector is used in 3D printers with 1.75 mm Bowden-style extruder assemblies, to provide a cool, safe, and neat path for the filament to travel. This ensures that it reaches the hotend assembly without any problems, which translates to better quality prints and greater consistency. The connector utilizes a John Guest fitting, which tightens with tension, to ensure that it maintains a firm grip on the tubing. It’s easy to see why this connector is such a popular choice for Bowden-style extruders, as their compatibility and high corrosion resistance make it a valuable investment for 3D printing.

E3D Aluminium J-Head Hotend RepRap Extruder for 3D Printers The 3D Printer Aluminium Assembled Extruder J-Head Hotend RepRap is used to print filament in the 3D printer. Build onto signature high-temperature performance that allows you to print high-temperature material. the product is now focused on adding increased functionality with a soft and flexible filament. By providing a PTFE liner tube through the hot end that you can extend into your 3d printer extruder, this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments like Ninja Flex, Flex PLA, and Flex Polyester. This opens up a huge range of new opportunities for your printer. All metal enables working with Poly-carbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end. check out : 1.75mm Black ABS Filament -1Kg If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because of the slippery property of filament. It has little friction with the plastic. This limits wear and loss of energy. The tube's other end is connected to the extruder’s hotend. Check out our entire range of 3D Printer, 3D Pen, Filaments

Extruder Kit Left Side MK8 Aluminum 3D Printer Block This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is a very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder. The MK8 Extruder is available in 3 different types – Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side extruder as shown in the product image. Also check the Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short . It is designed for use in different types of 3D printers, supporting both bowden and MK8 extrusion. The extruder is compatible with a NEMA 17 stepper motor and aims to reduce wiredrawing issues during remote feeding.

V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. check out : PTFE 3x4mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (3mm ID X 4mm OD) Also check V5 Heat Break Hotend Throat Without Teflon Tube designed for 1.75mm filament . It is compatible with the E3D V5 hot end for 3mm filament. Made from high-grade stainless steel, the heat break prevents heat creep and clogs.

V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V5 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V5 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA.

V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.00 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle.

V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle.

V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With out Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.00 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75 mm Filament