0
0
0
0
My Menu
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament

(0)
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the …
Condition: NEW
As low as ₹36.72   ₹54.60 Incl. GST (No Hidden Charges)
Backorder Available Delivery: Next Day Delivery
IN STOCK SKU#: IOT-92
Delivery & Pickup Options
Get it Next Day on Order

Order now and we'll have it ready for delivery by the next business day.

For bulk orders or wholesale inquiries, please contact us at Email: support@iotcart.in or call/message us at Phone: 8050206487.

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA.

  • Widely used for Reprap Prusa I3 3D printer.
  • Compatible with all 1.75mm PLA ABS filament.
  • Precision machined from high grade Titanium to prevent heat creep and clogs.
  • Factory polished inside bore offers smooth surface finish for reliable performance without jams
Material Stainless steel
Fit for Filament size 1.75mm
Inner diameter 2mm
Length 26.5 mm

No FAQs available for this product yet.

To rate this product please login!

About V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament by Iotcart

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. …

Categorised under: Extruders & Heat Blocks

Related products

Related products

Iotcart SES-P-165 0.2mm Copper Nozzle for MK8 Reprap 3D Printers
Iotcart SES-P-165 0.2mm Coppe…
(0)
0.2mm Copper Extruder Nozzle Print Head For Makerbot MK8 Reprap 3D Printer 0.2mm Nozzle is made of hardened steel for 1.75 mm filament. It is compatible with E3D v6 kits and is to be used for filament filled with carbon fiber or other abrasive materials. Normally Carbon-filled filaments cause rapid and significant damage to standard nozzles, so these nozzles are best to use. By using this nozzle you can print with carbon fiber, filled PLA, or glow-in-the-dark filaments. Copper (brass).Good abrasion resistance, heat resistance, and corrosion resistance. check out : 1.75mm Natural ABS Filament -1Kg
₹22.25  
Backorder Available
₹47.60
Incl. GST (No Hidden Charges)
V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament
V5 Heat Break Hotend Throat W…
(0)
V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. check out : PTFE 3x4mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (3mm ID X 4mm OD) Also check V5 Heat Break Hotend Throat Without Teflon Tube designed for 1.75mm filament . It is compatible with the E3D V5 hot end for 3mm filament. Made from high-grade stainless steel, the heat break prevents heat creep and clogs.
₹42.28  
Backorder Available
₹61.60
Incl. GST (No Hidden Charges)
Volcano hot end Heater Block/Heating Block for 3D Printer
Volcano hot end Heater Block/…
(0)
Volcano hot end Heater Block/Heating Block for 3D Printer This is the specialised heater block for Volcano upgrade pack. Compatible with all Volcano Nozzles and all HotEnds except Cyclops. This block uses the same clamped thermistor mounting configuration as the E3D-v6 Heater Block for maximum ease of use and security. The block also has a heater cartridge clamping system for maximum heat transfer, this time using two screws for clamping instead of the one in E3D-v6. This block absolutely cannot be used with a non Volcano nozzle, plastic will go everywhere, please don't try. Volcano uses the same thermistor, Heater Cartridge, fixings methods and procedures as E3D-v6 hotends . As such assembly of Volcano is essentially identical to that of the standard E3D-v6 block, the only notable difference is that there are two heater clamping screws, and the heater wires should exit through the top of the block.
₹90.13  
Backorder Available
₹126.00
Incl. GST (No Hidden Charges)
3D INKJET E3D V6 J-Head 1.75mm 285°C Extruder Kit - 3D Printer Upgrade
3D INKJET E3D V6 J-Head 1.75m…
(0)
3D INKJET E3D V6 J-head Extruder Kit The 3D extruder is the part of the 3D printer that ejects material in liquid or semi-liquid form in order to deposit it in successive layers within the 3D printing volume. Extruder is considered as one of the important components of a 3D printer. It is the part of the 3D printer responsible for drawing in, melting and pushing out the filament. check out : 3mm 100g Green ABS Filament
₹593.09  
Backorder Available
₹1050.00
Incl. GST (No Hidden Charges)
Iotcart SES-P-95 Left Side MK8 Aluminum 3D Printer Extruder Kit - 3D Printing Component
Iotcart SES-P-95 Left Side MK…
(0)
Extruder Kit Left Side MK8 Aluminum 3D Printer Block This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is a very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder. The MK8 Extruder is available in 3 different types – Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side extruder as shown in the product image. Also check the Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short . It is designed for use in different types of 3D printers, supporting both bowden and MK8 extrusion. The extruder is compatible with a NEMA 17 stepper motor and aims to reduce wiredrawing issues during remote feeding.
₹228.12  
Backorder Available
₹438.20
Incl. GST (No Hidden Charges)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 1.2mm
V6 Volcano Brass Length Extru…
(0)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 1.2mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. check out : V6 Volcano Brass Length Extruder Nozzle 3.0mm x 1.0mm Note: Volcano nozzles are only compatible with the Volcano block.
₹54.53  
Backorder Available
₹77.00
Incl. GST (No Hidden Charges)
Iotcart MK8 Aluminium Hot End Heating Block for 3D Printers - Extruder Upgrade
Iotcart MK8 Aluminium Hot End…
(0)
Aluminium Hot End Heating Block MK8 For 3D Printers Heat block MK8  is a 3D printer’s  is the part of the extruder so the nozzle meets the thermal barrier tube. Contained within the  block is also the heater cartridge and thermocouple was typically made of aluminum in which the part functions literally melting the filament as it passes through the thermal tube to be extruded out of the nozzle. The mounting hole works perfect with nozzle & nozzle throat. Reliable accessory for 3D printer DIY lovers.
₹54.53  
Backorder Available
₹78.40
Incl. GST (No Hidden Charges)
V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75 mm Filament
V6 Bowden Heat Break Hotend T…
(0)
V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle.
₹36.72  
Backorder Available
₹63.00
Incl. GST (No Hidden Charges)
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 0.8mm
V6 Volcano Brass Length Extru…
(0)
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 0.8mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. check out : 1.75mm 100g White ABS Filament Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. Note: Volcano nozzles are only compatible with the Volcano block.
₹55.64  
Backorder Available
₹124.60
Incl. GST (No Hidden Charges)
Iotcart MK8 Extruder for 3D Printers - High Precision Printing
Iotcart MK8 Extruder for 3D P…
(0)
MK8 Extruder for 3D printers The MK8 extruder features outstanding quality and ensures better performance for 3D printers . The MK8 extruder is manufactured with a V design which makes it convenient for users to load the filament right to the end of the barrel. This extruder model for 3D printers is equipped with a PTFE tube inside the barrel. This ensures that there is fluent feeding of the filament. It also features a self-lubricating system that avoids any blockage.
₹1057.10  
Backorder Available
₹2812.60
Incl. GST (No Hidden Charges)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 0.8mm
V6 Volcano Brass Length Extru…
(0)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 0.8mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. Note: Volcano nozzles are only compatible with the Volcano block.
₹51.19  
Backorder Available
₹77.00
Incl. GST (No Hidden Charges)
V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament
V5 Heat Break Hotend Throat W…
(0)
V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V5 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V5 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament
₹38.94  
Backorder Available
₹60.20
Incl. GST (No Hidden Charges)
V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 3.00 mm Filament
V6 Bowden Heat Break Hotend T…
(0)
V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With out Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.00 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75 mm Filament
₹44.51  
Backorder Available
₹75.60
Incl. GST (No Hidden Charges)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 0.4mm
V6 Volcano Brass Length Extru…
(0)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 0.4mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. Note: Volcano nozzles are only compatible with the Volcano block.
₹57.87  
Backorder Available
₹91.00
Incl. GST (No Hidden Charges)
Iotcart SES-P-98 Aluminium Heat Block for E3D V6 J-head 3D Printer - High Temp Compatible
Iotcart SES-P-98 Aluminium He…
(0)
Aluminium Heat Block for E3D V6 J-head 3D Printer This New V6 Heating Block Compatible with the PT100 sensor allows you to use our new thermistor cartridges, as well as high temperature, high accuracy PT100 temperature sensors. These are the newer version of the Volcano heater block and are equivalent to what comes in an eruption or power pack kit. With this heater block, you can use the supplied M3 grub screw to quickly and easily secure or release your temperature sensor. The v6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor in place. These design improvements improve the thermal response of the HotEnd and make thermistor assembly easier. Spare heater block for the E3D v6 hotend including the fixing kit. Can be used on both the 1.75 and 3mm versions.
₹54.53  
Backorder Available
₹91.00
Incl. GST (No Hidden Charges)

Features

icon

Backgrounds

Full Screen mode

Mode
On
Off

Dark mode

Mode
On
Off

Clear local storage

Clear Cache & Default
0
0