Micro:Bit GPIO T-type Expansion Board The Micro:Bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit. It expands the capabilities of the development platform by providing access to more pin. The micro:bit has three digital/analog, input/output rings that are available to use with alligator clips. With the Micro:Bit breakout we have broken out all 21 GPIO, power and ground-to-pin outs in a 0.1" formation. This breakout board for the micro:bit’s edge connector allows intermediate and advanced users to connect the micro:bit to breadboards and other sensors, motors, LEDs and more! Features of the Micro:bit T-type GPIO board Accessory Type Extension Board Expansion Board Type T-type GPIO Board GPIO Pins 21 GPIO Pins Dimensions 7 x 1.5 x 6.5cms Weight 15 grams Connection type 0.1-inch space headers Mounting Holes M3 Best Used for BBC Micro:Bit

Micro:Bit V2.2 Expansion Board Holder (Color May Vary) Micro:Bit Development Expansion Board Holder is compatible with Micro: bit, LEGO. The holder comes with good quality plastic material. The dimension of this Holder is (length x breadth x height) 88 x 64 x 13mm and its weight is around 20gram. Note: Package only includes the Development Board Holder. The Expansion Board Holder can be used with any Micro:bit Version. Applications: For RC Robot Compatible with microbit Lego

Microwave Radar Human Body Sensor The Microwave Radar Human Body Sensor has a Transmission signal processing control chip rcwl-9196. This human body sensor has a Wide operating voltage range of 4.0-28V. The RCWL-0516 Microwave Radar Sensor is a mini doppler radar sensor module equipped with supporting DC 4-28V wide voltage. It is an alternative to the PIR sensor and uses in many security alarms system. This is a mini radar motion sensor module equipped with RCWL-9196 chip based on the doppler microwave induction technology. It will automatically continuously output the high-level TTL signal when there is motion with adjustable delay time and sensitivity. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc. The output of the RCWL-0516 sensor is analog and can be connected to an analog input of a microcontroller and sampled by an ADC. The output voltage is roughly proportional to the distance between the sensor and the object. However, since it relies on a Doppler radar system , signal reflections from other nearby objects can interfere with the measurement, making it less reliable and accurate than other kinds of sensors . The reflections from different kinds of objects can also influence measurements, for example, metallic objects have a stronger reflection than plastic objects. Pinouts: Pinout of RCWL-0516 Microwave Radar Sensor CDS — Sensor disable input (low = disable) VIN — 4- to 28-V DC supply input OUT — HIGH (3.3 V) motion detected/LOW (0 V) idle GND — Ground/0 V 3V3 — Regulated DC output (100 mA max) Applications: Distance sensing Radar applications

Mini elm327 Bluetooth OBD2 ELM327 Bluetooth OBD2 Works on all 1996 to 2010 cars and light trucks. Software included in CD for smartphones (Android, Symbian), PC(Windows XP, Windows 7, and Windows 8). OBD-II Software for ELM327 Bluetooth is a free program that allows you to use your PC and a hardware interface to get information from your car's computer. The program is very user-friendly and easy to learn. It is also very easy to install, simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides. Compatible software: For Window version: ScanMaster-ELM, ScanTool.net, PCMSCAN For Android version: Torque, DashCommand, EOBD For Symbian version: OBDScope For Support System: Windows XP, Windows 7/8, Android, Symbian Applications: Engine RPM Calculated Load Value Coolant Temperature Fuel System Status Vehicle Speed Long Term Fuel Trim Intake Manifold Pressure Timing Advance Intake Air Temperature

Mini USB 2.0 Cable 30 cm (Colour May Vary) This is the mini USB Cable for Nano Board is compatible with Arduino (USB 2.0 A to USB 2.0 Mini B) 1 meter Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer. A Mini USB 2.0 cable is a type of USB cable that is used to connect devices with Mini USB 2.0 ports to computers or other devices. Mini USB 2.0 cables are commonly used to connect devices such as smartphones, digital cameras, and portable hard drives to computers. USB (Universal Serial Bus) is a standard for connecting devices to computers and other devices. Mini USB 2.0 is a version of the USB standard that uses a smaller connector than standard USB connectors. Mini USB 2.0 cables are typically used to connect devices that have limited space for connectors, such as smartphones and portable hard drives.

Mini USB Cable (1 meter) This Mini USB Cable is designed for Nano board compatible with Arduino . The USB A to MINI B with Nickel Plated Connector is the plug-and-play connection cable with MP3 players, digital cameras and PDAs, External Hard Drives. This Mini USB Cable is ideal for transferring your pictures from your digital camera to your PC or Mac.

Mornsun KNX20-22A640 The KNX20-22A640 is a 20W AC-DC switching power supply that is suitable for use in home and building intelligent control in compliance with the KNX specification. It has a number of features that make it ideal for this application, including: A choke coil that provides a smooth output current A set of auxiliary power outputs for powering other devices An LED indicator that indicates multiple operating conditions A wide operating temperature range of -40°C to 75°C The KNX20-22A640 is also very easy to install and use. It can be mounted in any standard 19-inch rack and is compatible with a wide range of KNX devices.

Mornsun LI100-20B12PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B12PR2 is a cost-effective, energy efficient AC-DC converter from Mornsun. It is compliant with international EMC standards and is safety approved to a variety of safety standards. The converter is lightweight and has a compact design, making it ideal for space-saving applications. It is also ideal for harsh environments, such as industrial control equipment machinery. Features Universal input voltage: 85-264VAC or 120-370VDC Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -40? to +70? High I/O isolation test voltage up to 4000VAC Industrial-grade design OVC III (EN61558-1 standards) Low standby power consumption, high efficiency Low ripple & noise Output short circuit, over-current, over-voltage protection Withstand 300VAC surge input for 5s DIN rail TS35X7.5/ TS35X15 mountable Safety according to EN61558 If you are looking for a cost-effective, energy efficient AC-DC converter that is compliant with international standards and is safe for use in harsh environments, then the LI100-20B12PR2 is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI100-20B15PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B15PR2 is a cost-effective, energy efficient AC/DC converter from Mornsun. It is compliant with international IEC62368 standards for EMC and is safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368. The LI100-20B15PR2 has a high level of stability and immunity to noise, and is ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment. Features: Cost-effective Energy efficient Compliant with international IEC62368 standards for EMC Safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368 High level of stability and immunity to noise Ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

Mornsun LI100-20B24PR2 AC/DC 100W DIN-Rail Power Supply The LI100-20B24PR2 is a cost-effective, energy-efficient AC-DC converter from Mornsun. It is compliant with international IEC62368 standards for EMC and is safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368. It has a high level of stability and immunity to noise, and is ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment. The LI100-20B24PR2 is a lightweight AC-DC converter with an extremely compact design for space saving. It is ideal for applications where space is limited, such as industrial control equipment and machinery. The LI100-20B24PR2 is also ideal for applications in harsh environments, such as those with high temperatures or humidity. Features Cost-effective Energy efficient Compliant with international IEC62368 standards for EMC Safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368 High level of stability and immunity to noise Ideal for applications such as industrial control equipment, machinery, and all kinds of applications in a harsh environment If you are looking for a cost-effective, energy-efficient AC-DC converter with a high level of stability and immunity to noise, the LI100-20B24PR2 is a great option. It is ideal for a variety of applications, including industrial control equipment, machinery, and all kinds of applications in a harsh environment. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Also check the Mornsun KNX20-22A640, a 20W AC-DC switching power supply designed for use in home and building intelligent control systems compliant with the KNX specification. It features a choke coil for smooth output current, auxiliary power outputs for other devices, an LED indicator for various operating conditions.