Aluminium Heat Block for E3D V6 J-head 3D Printer

7Semi 5A Analog INA169 DC Current Sensor Breakout The 7Semi 5A Analog INA169 DC Current Sensor Breakout is a precision Analog DC current sensor designed for accurate current monitoring in electronic circuits. Powered by the trusted INA169 chip, it delivers consistent current readings up to 5A across a wide input range of 2.7V to 60V. Its low offset voltage and minimal quiescent current ensure reliable measurements, while adjustable gain and overcurrent protection add versatility for various applications. Compact and easy to integrate with microcontroller-based systems, this INA169 current sensor is perfect for IoT projects, battery management, power monitoring, and smart energy solutions, providing dependable performance for both hobbyists and professional engineers. Features: Wide Voltage Range Compatibility: Operates efficiently between 2.7V and 60V, making it suitable for both low and high-voltage applications. High-Side Current measuring: Enables unipolar high-side current measuring for safer and more accurate readings. Customizable Gain Control: Easily alter output sensitivity with a single resistor to meet your individual application requirements. Built-in Signal Amplifier: Provides clean and amplified output signals for accurate ADC conversion. Overcurrent detection protects connected components by detecting and responding to excessive current. Low Quiescent Current: Consumes only 60 µA, making it ideal for energy-sensitive projects. Microcontroller-Friendly: Fully compatible with Arduino, ESP32, STM32, Raspberry Pi, and other development boards. Compact Design: Small form factor excellent for embedded system integration and space constraints. Connection Diagram with Arduino:

7Semi OPT3004 Digital Ambient Light Sensor Breakout with I2C STEMMA QT / Qwiic The 7Semi OPT3004 Digital Ambient Light Sensor Breakout is a compact and high-precision module designed to measure visible light just the way the human eye perceives it. Built around the OPT3004 sensor, it delivers exceptional accuracy, wide dynamic range, and excellent infrared rejection, making it ideal for real-world lighting applications. With seamless I2C compatibility and Qwiic/STEMMA QT support, this breakout is easy to integrate into microcontroller or IoT setups without complicated wiring. Whether you're building smart lighting systems, automating energy-efficient environments, or experimenting with environmental monitoring projects, this module provides consistent and dependable lux readings. Its advanced design, low-power performance, and precise optical filtering make it a reliable choice for hobbyists, students, and professional developers looking for accurate ambient light sensing in their projects. Features: The breakout uses the OPT3004 sensor, which delivers precise visible light measurements with excellent IR rejection to mimic human eye response. It offers a wide measurement range from 0.01 lux to 83,000 lux, allowing accurate performance in dim to bright environments. The module includes automatic gain ranging with a 23-bit effective dynamic range, ensuring stable results without manual adjustments. Designed with I2C support and Qwiic/STEMMA QT connectors, it enables quick, solder-free integration into various electronics projects. The board operates smoothly on both 3.3V and 5V supplies, making it compatible with popular microcontroller platforms. Its compact 27×20 mm footprint makes it suitable for space-constrained embedded or portable applications. Built with precision optical filtering to block over 99% infrared light within a ±85° angle for truly accurate lux readings.

7Semi SHT41 Temperature & Humidity Sensor Breakout with I2C Qwiic Interface The 7Semi SHT41 Temperature & Humidity Sensor Breakout is a high-precision humidity sensor module built for engineers, developers, and IoT creators who need reliable environmental data in compact embedded systems. Powered by Sensirion’s advanced CMOSens® technology, this I2C temperature sensor delivers accurate readings across a wide range, making it ideal for smart home automation, HVAC upgrades, weather stations, and industrial monitoring systems. With its accurate ±1.5% RH humidity and ±0.2°C temperature performance, it ensures consistent measurements even in demanding environments. Designed with a built-in Qwiic connector, the breakout allows fast, solder-free plug-and-play integration into Qwiic-compatible ecosystems like Arduino, Raspberry Pi, and other development platforms. Its quick response time, low power consumption, and compact 30 × 22 mm footprint make it a dependable environmental monitoring sensor for portable, battery-powered devices, IoT prototypes, and educational projects. Whether used in climate control systems or air-quality tracking, the SHT41 provides robust, long-term stability. Features: Designed with Sensirion’s CMOSens® technology to deliver high-accuracy temperature and humidity readings with long-term stability. Offers a full 0–100% RH humidity range and a wide temperature range of -40°C to 125°C, making it suitable for varied climates and applications. Integrated Qwiic connector provides seamless, solder-free connectivity for rapid prototyping and easy hardware integration. Supports I2C communication, allowing compatibility with Arduino, Raspberry Pi, ESP32, and other development platforms. Features a compact and lightweight 30 × 22 mm PCB, ideal for embedded and space-constrained designs. Operates on 3.3V–5V supply with low operating current, making it suitable for battery-powered and energy-efficient systems.

7Semi DC Buck Converter Breakout 5V 2A Out (AP62301) (BO-10133) The 7Semi DC Buck Converter Breakout 5V 2A Out (AP62301) is a small power module that converts higher DC input voltages into a steady 5V output with up to 2A current. It allows you to power 5V-based electronics from a wide range of DC power sources such as batteries and adapters. This makes it perfect for projects that need a reliable 5V supply. Built with an efficient synchronous buck converter design, this module delivers stable power while keeping energy loss and heat to a minimum. Its compact size makes it easy to add to space-limited electronics projects like IoT devices, microcontroller boards, and portable systems. Whether you’re building sensors, development boards, or embedded systems, this buck converter gives you a simple and dependable way to get 5V power. Features: Provides a stable 5V output with up to 2A continuous current Accepts a wide range of DC input voltages for flexible power sources Efficient synchronous buck converter design for low power loss Low heat generation for cool and reliable operation Compact breakout board for easy integration and prototyping Ideal for powering 5V microcontrollers, sensors, and IoT devices Perfect for embedded systems, portable electronics, and hobby projects

7Semi SHT40 SGP40 VOC Environmental Monitoring Sensor Module Qwiic-Ready The 7Semi SHT40 + SGP40 VOC Environmental Monitoring Sensor Module is designed to help you measure temperature, humidity, and air quality with high accuracy and minimal effort. Built with advanced SHT40 and SGP40 sensing technology, this compact module delivers precise data for temperature (–40°C to 125°C), humidity (0–100% RH), and VOC levels with excellent response time and reliability. Whether you're prototyping with Arduino, Raspberry Pi, or any I2C-based microcontroller, the Qwiic-compatible interface makes integration incredibly simple and clean. This breakout board is ideal for home automation, indoor air-quality projects, workplace monitoring, or industrial systems where accurate VOC readings matter. Its low power consumption and digital 16-bit output make it highly suitable for long-term IoT deployments, high-precision environmental sensing projects, and portable air-quality monitors. Features: Designed as a compact breakout board integrating the SHT40 high-precision temperature and humidity sensor and the SGP40 VOC sensor for reliable environmental monitoring. Offers fast and accurate measurements, including ±0.2°C temperature accuracy and ±1.8% RH humidity accuracy, ensuring dependable readings in various environments. Qwiic-compatible interface enables effortless plug-and-play connectivity with I2C-enabled microcontrollers and SBCs without soldering. Produces 16-bit digital raw and processed VOC Index signals for easy integration into data-logging, automation, or IoT systems. Ensures low power consumption, making it suitable for battery-powered and continuous-monitoring applications. Built to detect a wide range of volatile organic compounds such as ethanol, acetone, and formaldehyde with high sensitivity and quick response times. Board Dimensions: Arduino I2C Connection Diagram:

7Semi BME688 Environmental Sensor Probe with Gas, Pressure, Temperature & Humidity Sensor The 7Semi BME688 Environmental Sensor Probe is a compact, AI-enabled environmental monitoring solution designed for precise measurements of temperature, humidity, barometric pressure, and gas levels. Built using the advanced Bosch BME688 sensor, it provides highly accurate, real-time environmental data that supports air quality monitoring, research applications, industrial automation, and smart home systems. Housed in a durable plastic shell, the probe ensures long-term stability while maintaining excellent breathability necessary for accurate gas sensing. This versatile environmental probe uses an I2C digital interface for easy integration with microcontrollers and embedded systems, making it suitable for both portable and fixed installations. With a wide operating range and low power consumption, it delivers stable performance even in harsh or fluctuating environments. AI-powered gas sensing adds advanced analytical capabilities such as IAQ scoring, VOC detection, CO₂-equivalent estimation, and bVOC outputs, making this probe a powerful tool for environmental diagnostics and air-quality-driven automation. Features: Provides simultaneous measurement of temperature, humidity, pressure, and gas concentration, enabling complete environmental assessment in a single compact device. AI-powered gas sensing detects VOCs, CO₂-equivalents, and various gases at ppb-level sensitivity for accurate indoor air quality monitoring. Durable plastic enclosure offers strong resistance to corrosion, dust, and temperature variations while maintaining high permeability for reliable sensing. Wide operational range ensures dependable performance from -40 to 85°C and 0–100% RH, suitable for both indoor and outdoor monitoring environments. Low power design supports battery-operated systems, making it ideal for portable, energy-efficient projects. Mini Round Shell (MRS) connector with a 1m cable provides secure and professional-grade installation flexibility. I2C digital communication interface simplifies integration with embedded systems and common microcontrollers. NIST-traceable factory calibration guarantees accuracy for industrial, regulatory, and research applications. Delivers advanced analytical outputs including IAQ, bVOC, CO₂-equivalent, gas intensity, gas scan, and air quality indexes. Humidity Sensors Pins: Digital Humidity and Temperature Sensor Probe I2C Interfacing with MCU:

7Semi BNO086 IMU Mini Breakout Board for Robotics The 7Semi BNO086 IMU Mini Breakout Board for Robotics is a high-precision 9-axis inertial measurement unit designed to deliver accurate motion and orientation data in real time. Powered by the Bosch BNO086 sensor, it integrates a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer with an advanced built-in sensor fusion algorithm, eliminating the need for complex external processing. This breakout board provides exact orientation, acceleration, and rotational data through I2C and SPI interfaces, making it easy to integrate with microcontrollers used in robotics and embedded systems. Its compact size and reliable performance make it ideal for robot navigation, drone stabilization, AR/VR motion tracking, and IoT automation applications, where precise and stable motion sensing is critical. Features: High-Precision Motion Tracking: Ceva's MotionEngine enables seamless 9-Axis and 6-Axis sensor fusion, improving the user experience in AR, VR, robotics, and IoT apps. Dynamic Calibration: Automatically adjusts for bias in the accelerometer and gyroscope based on time and temperature, ensuring consistent performance under changing conditions. Configurable Activity Tracking: Includes classification modes for walking, running, standing, in-vehicle, and cycling activities. Intelligent Power Management: Activity classifiers and wake-on-motion features help to optimise power use. Host-Side Library Compatibility: Expands capabilities by including libraries that support VR, AR, and attitude monitoring, making it ideal for high-performance sensor applications. Flexible Connectivity Options: Includes a 4-pin JST connector for easy MCU connection and 0.1"-spaced pins for breadboard use. I2C Interface Compatibility: Allows for flexible and efficient connection, ensuring dependable data transport.

7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) The 7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) is a compact power module designed to step down higher DC voltages to a stable 3.8V output with up to 2A current. It supports a wide input voltage range, making it suitable for use with batteries, adapters, and other DC power sources in low-voltage electronics. Built on an efficient synchronous buck converter design, this module delivers reliable power with minimal heat and energy loss. Its small size makes it ideal for space-constrained projects such as IoT devices, embedded systems, and portable electronics. Whether you’re prototyping or building a final product, this buck converter offers a simple and dependable power solution. Features: Provides stable 3.8V output at up to 2A continuous current Accepts a wide DC input range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient power use Compact breakout board for easy integration Ideal for IoT, battery-powered, and embedded electronics Suitable for microcontrollers, sensors, and small devices

DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino The DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino is a high-precision Analog pH Sensor designed for professional and industrial applications requiring continuous pH monitoring. This Arduino pH Sensor uses an industrial-grade glass membrane electrode with low impedance, delivering fast response, excellent thermal stability, and stable performance over long periods. It supports a full measurement range of 0 pH to 14 pH with linear voltage output, ensuring accurate and reliable readings. The sensor integrates easily through a BNC connector and PH2.0 interface, allowing direct connection to any Arduino analog input. Its reference system, based on Ag/AgCl gel electrolyte with a PTFE membrane, provides strong anti-pollution characteristics and prevents clogging, making it an ideal industrial pH sensor for Arduino for water treatment systems, environmental monitoring, and laboratory analysis. Attention: The probe's bottle top contains protective fluids (3.3mol/L KCL). Even if the bottle cap is tightly fastened, some protective liquid may leak around it, resulting in white crystals. However, as long as the bottle top contains protective liquid, the probe's life and accuracy will be unaffected. Please use it with confidence. It is recommended that the white crystals be returned to the bottle cap's protective liquid. Features Industrial-grade Analog pH Sensor for accurate measurement Compatible with Arduino and other microcontrollers Measures pH range from 0 to 14 Fast response with high stability BNC connector for secure sensor connection Plug-and-play PH2.0 analog interface Built-in power indicator LED Suitable for long-term online monitoring Low maintenance and long sensor life Ideal for water quality and lab applications Applications Water Quality Surveillance Aquaculture

7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header The 7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header is a versatile and high-precision environmental sensor designed for modern monitoring applications. Built around Bosch’s advanced BME688, it accurately tracks temperature, humidity, air pressure, and gas levels, helping you gain meaningful insights into environmental conditions. Its compact nano form factor and I2C interface make integration simple with Arduino, Raspberry Pi, and other development boards. Whether you’re building a smart home system, an industrial monitoring setup, or an environmental research project, this environmental monitoring sensor delivers dependable performance in a user-friendly design. Features: AI-Enhanced Gas Sensing: Identifies dangerous gasses with exceptional accuracy. Comprehensive Monitoring: A single sensor measures numerous essential environmental factors. Flexible Interface: I2C connectivity enables seamless interaction with microcontrollers. Compact design: The nano breakout board is ideal for projects with limited space. 3.3V Operating Voltage: Suitable for a wide range of development boards. Gas sensor sensitivity, selectivity, and data rate can all be adjusted to meet your individual application requirements.

SmartElex Tracker Sensor The SmartElex Tracker Sensor is a 5-channel analog IR sensor designed for reliable and accurate line detection in robotics applications. Unlike basic digital sensors, this line tracking sensor delivers precise analog values from all five channels, allowing smoother movement and better control in line-following robots. It works by measuring infrared reflectance, where white surfaces reflect more IR light and black lines absorb it, producing clear output differences. With a 1 cm to 5 cm sensing range, 16 mm sensor spacing, and 3.3V–5V operating voltage, this Tracker Sensor integrates seamlessly with Arduino, Raspberry Pi, and other microcontrollers, making it perfect for educational, DIY, and competitive robotics projects. Features: Five analog output channels allow for precise tracking. Infrared reflectance-based sensing. Improved accuracy compared to digital-only sensors. Detects white and black surfaces that change values. Detection range: 1cm-5cm Detector space: 16mm Compatible with 3.3V to 5V systems. Perfect for robotics and automation tasks.

7Semi SGP40 VOC Air Quality Sensor Breakout with Qwiic I2C Interface The 7Semi SGP40 VOC Air Quality Sensor Breakout is designed for creators, engineers, and HVAC professionals who need accurate and dependable indoor air quality measurement. Built around Sensirion’s advanced SGP40 sensor, it detects a wide range of volatile organic compounds with high sensitivity, making it ideal for smart home automation, air purifiers, and environmental monitoring projects. Its compact 19 x 19 mm footprint and low power consumption make it an excellent fit for battery-powered devices and space-constrained applications. With its digital I2C interface and compatibility with both 3.3V and 5V systems, this breakout offers effortless integration with popular microcontroller platforms. The built-in VOC Index algorithm translates raw sensor data into an easy-to-understand metric, helping users track real-time changes in indoor air quality. Whether you're building a DIY sensor hub or upgrading an advanced HVAC system, this VOC sensor module provides reliable, fast, and consistent performance. Features: High-performance SGP40 sensor capable of detecting a broad spectrum of volatile organic compounds for precise indoor air quality monitoring. Fully digital 16-bit output with on-chip humidity compensation to ensure consistent and accurate readings in varying environments. Wide supply compatibility with 3.3V and 5V systems, making it suitable for Arduino, Raspberry Pi, ESP32, and similar controllers. Sensirion VOC Index algorithm interprets raw VOC events and provides actionable, human-readable VOC Index values. Ultra-compact 19 × 19 mm PCB with low heat emission for stable humidity and temperature readings. Low average power consumption down to 6 mW, enabling long-life battery-powered applications. Fast response time under 10 seconds, ensuring quick detection of changes in indoor pollutant levels. Board Dimensions: Arduino I2C Connection Diagram:

7Semi IMU BMI270 Accelerometer & Gyroscope Breakout - STEMMA QT / Qwiic Compatible The 7Semi IMU BMI270 Accelerometer and Gyroscope Breakout is a high-performance motion-sensing module built around Bosch Sensortec’s powerful BMI270 IMU. Designed for next-generation wearable devices, robotics projects, and motion-tracking applications, this sensor delivers exceptional accuracy, ultra-low power consumption, and industry-leading self-calibrating gyroscope technology. With features like motionless CRT (Component ReTrimming), it automatically compensates for soldering drift, ensuring reliable long-term performance with minimal sensitivity error. STEMMA QT / Qwiic connectors, integrating the BMI270 into your microcontroller or IoT system is effortless, no soldering, no hassle. This breakout also supports advanced gesture recognition, activity detection, step counting, and context awareness, making it ideal for smart wearables, VR projects, and embedded motion-tracking solutions. Whether you’re building smart eyewear, intelligent shoes, robotics platforms, or fitness devices, the BMI270 ensures smooth, precise, and real-time inertial data. Features: Supports 3.3V and 5V operation for compatibility with a wide range of microcontrollers. Includes a 16-bit 3-axis accelerometer with selectable ±2g/4g/8g/16g ranges for flexible performance. Equipped with a 16-bit 3-axis gyroscope supporting ±125 to ±2000 dps for accurate angular sensing. Features Bosch’s self-calibrating gyroscope (CRT) to eliminate post-soldering drift and maintain precision. Supports rich motion and gesture detection, including step counting, activity recognition, wrist flick, any-motion, no-motion, and more. STEMMA QT / Qwiic interface provides plug-and-play connectivity for easy prototyping and integration. Ideal for wearables, robotics, AR/VR systems, motion tracking, smart textiles, and IoT devices. BMI270 Accelerometer and Gyroscope Breakout Dimensions: BMI270 Accelerometer and Gyroscope Breakout Pinout: BMI270 Breakout Arduino Connection:

SmartElex NS612 PIR Motion Sensor Module The SmartElex NS612 PIR Motion Sensor Module is a passive infrared motion detection solution designed to sense human movement by detecting changes in infrared radiation. It helps automate systems by triggering actions only when motion is detected, reducing unnecessary power usage and improving system efficiency. This module is suitable for students, makers, engineers, educators, and startups working on electronics projects that require reliable and responsive motion sensing for security, automation, or interactive applications. This PIR motion sensor module is widely used in robotics, IoT devices, security systems, and home or industrial automation projects where motion detection is essential. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into prototypes and working systems. The dependable performance and simple interface make it ideal for applications like motion-activated lighting, alarm systems, smart monitoring solutions, and embedded electronics projects. Features: Passive infrared (PIR) sensor for accurate human motion detection Detects movement by sensing changes in infrared radiation Long sensing range suitable for wider coverage areas Low power consumption for battery-powered applications Digital output for easy interfacing with microcontrollers Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

SmartElex TMP102 Digital Temperature Sensor The SmartElex TMP102 Digital Temperature Sensor is a compact and easy-to-use Temperature Sensor Module designed for accurate digital temperature measurement in Arduino, IoT, and embedded projects. Unlike analog sensors, this Digital Temperature Sensor communicates directly over the I2C bus, delivering stable and noise-free readings with a fine resolution of 0.0625°C and accuracy of ±0.5°C. It operates efficiently within a 1.4V to 3.6V range and includes onboard 4.7kΩ pull-up resistors for hassle-free I2C communication without level shifting. With added Molex PicoBlade connectors, an address jumper for flexible I2C addressing, and standard 0.1″ pin spacing for breadboard compatibility, this module is ideal for temperature monitoring, automation systems, and low-power electronics projects. Features: uses the I2C interface. I2C Address: 0x48 by default (three more addresses are also selectable). Resolution: 12-bit, 0.0625ºC. Typical temperature accuracy is 0.5ºC. 3.3 V sensor Supports up to four TMP102 sensors on the I2C bus at one time. 2 Molex PicoBlade Connectors