USB Type A to B Cable for Arduino This is a USB A-B Cable For UNO/MEGA Board (USB A to B)-1feet, you can use it to connect “Arduino Uno”, “Arduino Mega 2560? or any Arduino board with the USB female A port of your computer. Length is approximately 20 cm. Cable colour may vary slightly from image as our stock rotates.

USB Type C PCB Male Breakout Board (4 Pin) -7Semi The USB Type C PCB Male Breakout Board (4 Pin) - 7Semi is a practical solution for developers and hobbyists seeking easy access to USB Type-C functionality in their projects. It features a straight plug type USB-C male connector mounted on a compact PCB that breaks out four essential pins: V+, GND, D+, and D-. This design removes the complexity of soldering small surface-mount pads and provides a simple, reliable interface for powering devices or transferring data. Its vertical alignment and streamlined layout make it especially useful for setups without dedicated USB-C mounts. Features: Easy Integration: Enables quick prototyping with USB-C in DIY and embedded systems Simplified Design: Avoids the hassle of directly soldering to small USB-C SMD pads 4-Pin Breakout: Access to V+, GND, D+, and D- pins Straight Plug Type: Designed with a 24-pin USB-C male straight connector Compact PCB: Small footprint for space-constrained applications

USB Type C Vertical Female Breakout -7Semi The USB Type C Vertical Female Breakout -7Semi offers an effortless way to integrate a USB-C connector vertically into your projects, making panel mounting straightforward and clean. It eliminates the hassle of soldering individual surface-mount pads by breaking out the key USB-C pins—VBUS, GND, CC1, CC2, D+, and D-—to a standard 0.1" pitch header, making wiring and prototyping much easier. This breakout board supports power delivery of up to 3A, depending on the capabilities of the connected upstream device, ensuring reliable power and data connectivity for a variety of applications. Features: Vertical USB-C connector orientation for easy panel mounting Breaks out USB-C signals: VBUS, GND, CC1, CC2, D+, and D- Supports up to 3A current delivery 0.1" pitch header for easy prototyping and wiring Eliminates need for soldering tiny surface-mount pads

USB Type-C Connector Breakout (Female) - 7Semi The 7Semi USB Type-C Connector Breakout (Female) offers a simple and efficient solution for integrating USB-C connectivity into your projects without the need to solder delicate SMD pads. Designed for convenience, this breakout board provides easy access to essential USB-C signals, including VBUS, GND, CC1, CC2, D+, and D- via a standard 0.1" header. It supports a nominal current of 1.5A, extendable up to 3A depending on the upstream device. Ideal for connecting microcontrollers, sensors, displays, and other electronics, this breakout board enhances your project’s flexibility and speed of development. With USB Type-C becoming the universal standard across consumer electronics, automotive, and industrial systems, the 7Semi breakout board delivers a versatile, cost-effective solution to meet modern connectivity needs. Features: Effortless Integration: Easily incorporate USB-C connectivity into projects without soldering tiny SMD pads. Comprehensive Pin Access: Breaks out VBUS, GND, CC1, CC2, D+, and D- to a 0.1" header. Power Delivery: Supports a nominal current of 1.5A, extendable up to 3A based on the upstream device. Versatile Applications: Ideal for connecting microcontrollers, sensors, displays, and other electronics. Compact Design: Space-efficient layout suitable for various project sizes. Durable Construction: Built to withstand repeated connections, ensuring long-term reliability. User-Friendly: Facilitates quick prototyping and development without complex setup.

V3 Version 863MHz-928MHz SX1262 ESP32 WIFI Bluetooth Lora with 0.96 OLED Display The ESP32 LoRa SX1262 0.96 Inch OLED Display Bluetooth WiFi Module for Arduino is a new development of the cost-effective networking program. The ESP 32 WiFi LoRa is a classic IoT dev-board designed & produced by Heltec Automation. Since its launch in 2017, it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions. This loRa module has Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development. It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers. check out : MKS TFT-WIFI V1.0 ESP8266 WIFI Module Pinout: Pinout Of V3 ESP32 WIFI Bluetooth Lora With 0.96 OLED Display

V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. check out : PTFE 3x4mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (3mm ID X 4mm OD) Also check V5 Heat Break Hotend Throat Without Teflon Tube designed for 1.75mm filament . It is compatible with the E3D V5 hot end for 3mm filament. Made from high-grade stainless steel, the heat break prevents heat creep and clogs.

V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V5 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V5 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA.

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament – 29mm This V5 Heat Break Hotend Throat (29mm) is designed for makers who want smoother, more reliable 3D printing without frequent clogs or heat-creep issues. Crafted from high-grade stainless steel, it provides excellent thermal isolation, helping maintain stable extrusion temperatures when printing materials like PLA and ABS. Since it does not use a PTFE liner, the heat break offers better durability and long-term performance, making it a great upgrade for any V5-compatible hotend. Whether you're using a Reprap Prusa i3 or another 1.75mm-filament 3D printer, this heat break ensures consistent flow thanks to its factory-polished internal bore. The smooth inner surface reduces friction and prevents jams, giving you a cleaner printing experience. If you're looking for a reliable, safer, and long-lasting heat break designed for precision extrusion, this stainless steel V5 model is a dependable choice. Features: Designed for V5 hotends and fully compatible with 1.75mm PLA and ABS filaments for smooth and stable extrusion performance. Made from high-quality stainless steel to minimize heat creep and improve temperature control during printing. Factory-polished internal bore provides a friction-free filament path, reducing the chances of clogs or jams. Durable PTFE-less construction ensures long service life and reliable performance under continuous usage. Ideal replacement or upgrade part for Reprap Prusa i3 and other 3D printers using 1.75mm filament systems.

V6 Bowden Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This 3D printer throat nozzle is made of high grade material, which is not easy to break or rust, and also heat-resistant. The 3D printer feeding tube is easy to install, not requiring any special tools. It is designed to break the heat transmission efficiently while in work. This 3D printer piping is lightweight and compact, easy to store and carry in the pocket. This throat pipe is easy to maintain, for its smooth surface and rust-proof material.