Official Arduino Portenta Vision Shield with LORA Connectivity The Official Arduino Portenta Vision Shield with LoRa Connectivity is an advanced hardware extension designed for the Arduino Portenta family, specifically the Portenta H7. This shield enables powerful edge AI applications by combining embedded computer vision capabilities with long-range wireless communication using LoRa. It also features onboard sound event detection, making it ideal for responsive, intelligent systems. Paired with the high-performance dual-core ARM Cortex processor and robust wireless connectivity of the Portenta board, the Portenta Vision Shield empowers developers to create cutting-edge IoT solutions with ease—whether connected to the Arduino Cloud or private infrastructure. Arduino Portenta Vision Shield Pinout: Features: Image recognition techniques are executed using the OpenMV for Official Arduino editor. LoRa wireless communication with a long range of 868/915MHz. Connects the Portenta H7 to the Internet of Things with little power usage. Two inbuilt microphones detect directional sounds. It captures and analyzes sound in real time. Using an external programmer, you can do low-level debugging on your Portenta board and special firmware changes. Store your collected data on the card or read configuration files.

LoRa-E5 (STM32WLE5JC) Module LoRa-E5 is a low-cost, ultra-low power, extremely compact, and high-performance LoRaWAN Module designed by Seeed Technology Co., Ltd. It contains ST system-level package chip STM32WLE5JC. This module is also embedded with ARM Cortex M4 ultra-low-power MCU and LoRa SX126X and therefore supports (G)FSK mode and LoRa. The previous versions of the LoRaWAN module all require additional use of MCU (Microcontroller) to run the application code. Now, you can directly and immediately put the LoRa-E5 STM32WLE5JC Module into use to complete this process without the hustle of additional accessories. With the Stamp Hole form factor, LoRa-E5 enables you to integrate this module on your device’s mainboard conveniently. Thanks to the innovative design, LoRa-E5 has a comparatively lower cost than other LoRaWAN modules. Applications: LoRa-E5 LoRaWAN® module is highly suitable for long-distance, ultra-low-power applications such as smart agriculture, smart city, wireless meter reading, sensor networks, wireless communication, and other low-power wide-area IoT scenarios. This LoRa E5 module is designed with industrial standards, hence it's highly suitable to be used in designing industrial IoT products, with a wide working temperature at -40? ~ 85?.

LR1302 LoRaWAN Gateway Module SPI EU868 SX1302 Long Range Gateway Module 8 Channels Support Without Pi Hat & Antenna Kit The Elecrow LR1302 LoRaWAN Gateway Module is a high-performance module designed for long-range wireless communication in IoT applications. This LoRaWAN module uses the powerful SX1302 chip, which improves on earlier versions by offering better sensitivity, lower power use, and cooler operation. This module supports 8 communication channels, allowing more devices to connect and share data efficiently. Built-in a mini-PCIe format, it has two antenna ports: one for general LoRa signals and one for specific transmissions. A metal shield protects it from outside interference, ensuring a stable connection. Compatible with the EU868 frequency, the LR1302 module is ideal for Arduino and IoT projects in smart cities, farming, and industrial settings, delivering reliable data connections without the need for additional parts like a Pi Hat or antenna kit.

DRAGINO LORA BEE V1.1 + HOPERF RFM95-98(W) The Dragino Lora BEE is a LoRa module that allows the user to send data and provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. The LoRa BEE targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on. The RFM95/96W transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption read more : Node to Node LoRa communication using Nano 33 BLE Sense Note: You have to be aware that Radio link quality and performances are highly dependent on the environment. Better performances can be reached with: Outdoor environment. No obstacles. No high-level radio interferer in the ISM 868MHz band. At least 1 meter above the ground. read more : How to use ESP32 with LoRaBEE as a node in LoRAWAN Features: The Dragino Lora Bee V1.1 module allows for ultra-long range spread spectrum communication and high interference immunity while minimizing current consumption. It is based on the SX1276/SX1278 transceiver and targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and more. The Lora Bee is available in 433MHz, 868MHz, and 915MHz versions and features FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation. It has a maximum link budget of 168 dB, programmable bit rate up to 300 kbps, and high sensitivity down to -148 dBm. The Hoperf RFM95-98(W) transceiver module features LoRa modulation and is available in 868MHz and 915MHz versions. read more : Node to Node communication on LoRa With ESP32 Applications : Automated Meter Reading Home and Building Automation Wireless Alarm and Security Systems Industrial Monitoring and Control Long-range Irrigation Systems GPS tracker

Multi-Channel Indoor Gateway For Lorawan-LPS8N The Dragino LPS8N Indoor LoRaWAN Gateway is an ideal option for smart buildings, home automation, and industrial IoT applications. It includes an Open Source OpenWrt system that can be easily managed via Web GUI or SSH. This gateway is equipped with the SX1302/03 LoRa concentrator and 10 configurable parallel demodulation pathways, that guarantee robust and reliable data transfer over long distances. Customizable frequency bands enable users to configure the gateway to suit specific regional requirements, while an optional cellular version offers additional connectivity options with 3G/4G support. The LPS8N indoor gateway is designed to resist environmental conditions, which makes it perfect for smart metering, agricultural, and smart city applications. The LPS8N is integrated with Remote.it remote management. It improves operating efficiency by allowing for smooth monitoring and maintenance. The Dragino LPS8N Indoor LoRaWAN Gateway not only offers high quality and longevity, its design and technology make it an ideal solution for a variety of IoT applications. Features: Open Source OpenWrt system Managed by Web GUI, SSH via LAN or WiFi Emulates 49x LoRa demodulators LoRaWAN/LoRa Gateway 10 programmable parallel demodulation paths Remote is remote management. Applications: Smart Buildings & Home Automation Logistics and Supply Chain Management Smart Metering Smart Agriculture Smart Cities Smart Factory

Elecrow LoRaWan Gateway Module Based on ESP32 with 1.8” LCD - 1 Channel for Long Range Communication (868Mhz) Elecrow Lorawan Gateway Module is the ultimate solution for establishing a robust IoT network with long-range communication capabilities. Crafted with cutting-edge technology, this gateway module utilizes the powerful ESP32 WROOM 32 processor, ensuring unparalleled performance in data transmission and processing. Designed to support Lorawan protocol 1.0.3, it offers seamless connectivity with other Lorawan sensors, enabling the creation of a comprehensive sensor acquisition system. This gateway module features the RA-01H module, which supports a wide frequency range from 803MHz to 930MHz, ensuring extended coverage even in challenging environments. With both WiFi and Ethernet interfaces, users have the flexibility to choose the most suitable network connection method based on their specific requirements. The 1.8-inch SPI-TFT-LCD with touch screen functionality provides an intuitive interface for monitoring data transmission status and IP information, enhancing overall user experience. Compatible with Arduino and Micropython, developers can easily customize applications and functionality according to their needs, making it ideal for a wide range of IoT projects. Its compact acrylic shell not only ensures portability but also serves as a protective cover, making it durable for various deployment scenarios. Complete with essential accessories such as antennas and USB cable, Elecrow Lorawan Gateway Module offers a comprehensive solution for building a reliable IoT network for applications in smart homes, industrial automation, agriculture, and more. Features: Uses ESP32 WROOM 32 as the main controller, with a dual-core 32-bit LX6 microprocessor from Xtensa, providing better performance. Integrates RA-01H module supports frequency band: 803MHz - 930MHz. Onboard 1.8-inch 128*160 SPI-TFT-LCD, ST7735S driver chip Not only supports ESP32 WIFI network connection but also has a 10/100Mbps RJ45 interface that allows Ethernet connection Compatible with Arduino and Micropython, making it easier for developers to create custom applications and functionality Exquisite acrylic protective shell and small and portable design, making it easy to carry and use

Elecrow LoRaWAN RA-08H Development Board Integrated RP2040 with 1.8 “ LCD for Long Range Communication (868Mhz/915Mhz? Join the growing community of IoT enthusiasts and developers with our Elecrow Development Board. Designed specifically for beginners, this board combines the power of the RP2040 dual-core chip and the RA-08H module, enabling users to dive into the world of LoRa and LoRaWAN protocols with ease. The RP2040 chip offers high performance and low power consumption, making it suitable for a wide range of applications in IoT, robotics, embedded systems, and more. Equipped with the Semtech-authorized ASR6601 RF chip, the RA-08H module supports the 868/915 MHz frequency band and features a 32 MHz MCU for enhanced functionality compared to traditional RF modules. With the Crowtail interface, GPIO ports, and 3.3V/5V outputs, the board provides seamless connectivity with sensors and electronic modules on the market. Additionally, it offers RS485, SPI, I2C, and UART interfaces for expanded compatibility with various sensors and modules. Enhancing user experience, the board integrates practical features like a buzzer, custom button, three-color indicator lights, and a 1.8-inch SPI interface LCD screen with 128*160 resolution. Simplify your project development and prototyping process with Elecrow Development Board's user-friendly design and versatile functionalities. GPIO Pin Definition RP2040 Lora RA-08H Development Board GPIO0 Crowtail-UART0-TX0 GPIO15 GPIO15/ Crowtail-D1 GPIO1 Crowtail-UART0-RX0 GPIO16 LCD-DC GPIO2 GPIO2 GPIO17 LCD-CS GPIO3 GPIO3 GPIO18 LCD-SCK GPIO4 RA-08H-LPRXD GPIO19 LCD-DIN GPIO5 RA-08H-TXD GPIO20 I2C0-SDA0/Crowtail-I2C-SDA/PCA9555-SDA GPIO6 GPIO6 GPIO21 I2C0-SCL0/Crowtail-I2C-SCL/ PCA9555-SCL GPIO7 GPIO7 GPIO22 LCD-RST GPIO8 GPIO8/UART1-TX1/Crowtail-UART1-TX1/485TX GPIO23 LCD-BLK GPIO9 GPIO9/UART1-RX1Crowtail-UART1-RX1/485RX GPIO24 485-EN GPIO10 GPIO10/SPI1-SCK GPIO25 DATA GPIO11 GPIO11/SPI1-MOSI GPIO26 A0/ Crowtail-A0 GPIO12 GPIO12/SPI1-MISO GPIO27 A1/ Crowtail-A1 GPIO13 GPIO13/SPI1-CS GPIO28 BUZZER GPIO14 GPIO14/ Crowtail-D0 GPIO29 ADC-KEY Features: Uses RP2040 as the main controller, with two 32-bit ARM Cortex M0+ processor cores (dual-core) , and provides more powerful performance Integrates the RA-08H module with 32MHz MCU, supports the 868/915MHz frequency band and AT command control Abundant external interface resources, compatible with Crowtail series modules and other common interface modules on the market Integrates commonly used functions like buzzer, LED light, LCD display and custom button, making it more concise and convenient when creating projects Onboard 1.8-inch 128*160 SPI-TFT-LCD, ST7735S driver chip Compatible with Arduino/Micropython, easy to carry out different projects

ELECROW LR1262 Node Board LoRaWan Node Module for Long Range Communication (868Mhz/915Mhz) Frenquency:868 Mhz Experience the cutting-edge technology with the LR1262 Node Board, featuring the powerful RP2040 controller and LR1262 module for seamless LoRa transmission capabilities. This module supports both LoRa point-to-point transparent transmission and integration with the LoRaWAN network, providing versatile connectivity options. By combining it with Crowtail sensor modules (Ax2/Dx2/IICx1/UARTx1), you can effortlessly create a robust Lora node for various applications. Designed for outdoor use, the LR1262 Node Board boasts a built-in lithium battery charging and discharging circuit, along with solar panel charging compatibility, offering hassle-free setup and operation in outdoor environments. With six interfaces compatible with commonly used sensors like temperature, humidity, air quality, and PM2.5, this module enables quick assembly of a Lora weather station. It is also ideal for projects in smart homes, smart factories, and smart logistics. The LR1262 Node Board comes equipped with a 20-pin header and a double-row pin header in the accessories, giving you the flexibility to choose whether to solder it or not, providing you with a wide range of development options and customization possibilities. Experience the convenience, versatility, and high performance of the LR1262 Node Board for your next tech project. Features: Uses RP2040 as the main controller, with two 32-bit ARM Cortex M0+ processor cores (dual-core) ,and provides more powerful performance Integrates the LR1262 module, supports frequency band: 803MHZ-930MHZ Abundant external interface resources, compatible with 150+ kinds of Crowtail series modules Supports both Lora point-to-point transparent transmission and the use of LoraWAN network Compatible with Arduino/MicroPython, easy to carry out different projects

Elecrow LR1302 LoRaWAN Gateway Module SPI EU868 SX1302 Long Range Gateway Module Support 8 Channels The Elecrow LR1302 LoRaWAN® Gateway Module is a next-generation long-range communication solution designed for high-performance IoT networks. Built on the powerful Semtech SX1302 LoRaWAN® baseband chip, it delivers improved sensitivity, lower power consumption, and stable operation compared to previous SX1301 and SX1308 versions. With support for 8-channel data transmission, it significantly enhances communication efficiency and device capacity. Its mini-PCIe form factor, dual antenna interfaces, and robust metal shielding ensure reliable, interference-free operation. Available in SPI and USB versions for the EU868 and US915 frequency bands, the LR1302 is perfect for diverse IoT deployments such as smart cities, precision agriculture, and industrial automation, offering stable connectivity and efficient data transfer over long distances. Features: Uses the Semtech® SX1302 baseband LoRa® chip, which has extremely low power consumption and great performance; The mini-PCIe form size and compact design make it easy to integrate into various gateway devices, suited for space-constrained application scenarios, and give flexible deployment options; Support 8-channel data transmission for improved communication efficiency and capacity. The ultra-low operating temperature removes the need for extra cooling and minimizes the size of the LoRaWAN® gateway. The SX1250 TX/RX front end has sensitivity down to -139 dBm@SF12 and TX power up to 26 dBm @3.3V. CE certification streamlines and facilitates the certification process for the final product. LR1302 LoRaWAN Gateway Module Pinout Diagram

ELECROW ThinkNode G1 868MHz 8-Channel LoRaWAN Gateway with SX1302 Chip Struggling with indoor positioning issues? The ThinkNode G1 is the solution! The Elecrow ThinkNode G1 is a state-of-the-art LoRaWAN indoor gateway that connects seamlessly via WiFi, Bluetooth, or Ethernet, supporting 8-channel transmission. Using LoRa wireless technology, it provides long-range, low-rate data transmission for reliable communication. With an advanced Semtech packet forwarder, SX1302 LoRa concentrator, and dual SX1250 chips, the G1 ensures efficient data processing. It supports global ISM frequency bands (815MHz to 960MHz) and offers a 5-10 km LoRaWAN signal range. Ideal for smart buildings, automation, logistics, smart metering, agriculture, and more, the G1 ensures stable connectivity and is the perfect solution for building robust LoRaWAN networks. Exclusively designed by Elecrow. Features Broad Network Compatibility Supports multiple LoRaWAN network servers, including The Things Network (TTN), ChirpStack, and more, offering flexible options for network integration with advanced packet forwarding technology. Integrated Gateway Server Features a plug-and-play design, simplifying network setup and speeding up IoT project deployment. Wide Signal Coverage Delivers 5 to 10 km of LoRaWAN signal range, ensuring reliable and efficient data transmission over long distances. High-Performance Hardware Powered by the MediaTek MT7628 processor and Semtech SX1302 baseband chip, ensuring robust and stable data handling. Flexible Connectivity Options Supports Wi-Fi, Ethernet, and other connection methods, providing a range of network access possibilities. Easy-to-Use Management Tools Equipped with professional management tools and cloud services, enabling effortless configuration and quick deployment through an intuitive Web interface for an enhanced user experience.