7Semi MCP4728 Quad DAC Module

7Semi MAX31855 K-Type Thermocouple Amplifier Breakout The 7Semi MAX31855 Thermocouple Amplifier Breakout is designed for creators, engineers, and industrial users who need reliable and highly accurate temperature readings from extreme environments. With its advanced MAX31855 converter IC, this breakout allows effortless digital temperature measurement using K-type thermocouples, making it a powerful choice for applications like 3D printing, HVAC monitoring, and high-heat industrial systems. The onboard cold-junction compensation ensures precision by automatically correcting any thermal offsets at the connector. Supporting temperatures from -270°C to +1372°C, it delivers 14-bit resolution with smooth 0.25°C read steps, providing dependable, noise-free readings for sensitive processes. Built-in fault detection helps identify open circuits or shorts, making the system easier to troubleshoot and safer for continuous operation. With its SPI-based digital interface and compatibility with 3.3V/5V logic microcontrollers, the module integrates cleanly with Arduino, ESP32, Raspberry Pi, and industrial controllers. Features: Supports a wide thermocouple measurement range from –270°C to +1372°C, making it suitable for extreme heat and cryogenic applications. Provides 14-bit high-resolution output with precise 0.25°C increments for accurate temperature monitoring. Includes built-in cold-junction compensation, ensuring reliable compensation for ambient temperature fluctuations. Offers a simple SPI digital interface, requiring minimal I/O pins for easy integration with most microcontrollers. Compatible with multiple thermocouple types including K, J, N, T, S, R, and E, providing versatility in system design. Features fault detection for open thermocouples and shorts to VCC/GND to enhance system safety. Supports both 3.3V and 5V logic levels, ensuring broad compatibility across development boards.

SmartElex NS612 PIR Motion Sensor Module The SmartElex NS612 PIR Motion Sensor Module is a passive infrared motion detection solution designed to sense human movement by detecting changes in infrared radiation. It helps automate systems by triggering actions only when motion is detected, reducing unnecessary power usage and improving system efficiency. This module is suitable for students, makers, engineers, educators, and startups working on electronics projects that require reliable and responsive motion sensing for security, automation, or interactive applications. This PIR motion sensor module is widely used in robotics, IoT devices, security systems, and home or industrial automation projects where motion detection is essential. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into prototypes and working systems. The dependable performance and simple interface make it ideal for applications like motion-activated lighting, alarm systems, smart monitoring solutions, and embedded electronics projects. Features: Passive infrared (PIR) sensor for accurate human motion detection Detects movement by sensing changes in infrared radiation Long sensing range suitable for wider coverage areas Low power consumption for battery-powered applications Digital output for easy interfacing with microcontrollers Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

7Semi SHT45 and SGP41 Environmental Sensor Breakout The 7Semi SHT45 and SGP41 Environmental Sensor Breakout is a versatile environmental sensor module designed for accurate and simultaneous measurement of temperature, humidity, and air quality. By combining high-precision SHT45 sensing with the advanced SGP41 air quality sensor on one compact board, it simplifies environmental monitoring for a wide range of projects. Whether you’re building smart home systems, indoor air quality stations, or industrial monitoring tools, this sensor package provides reliable real-time data where it matters most. Offering stable performance with easy digital communication interfaces, this breakout is ideal for both beginners and advanced makers. Its compatibility with popular microcontrollers and development platforms makes integration seamless for IoT applications, HVAC control, weather stations, and wellness monitoring systems. Students, hobbyists, and professionals alike will appreciate the module’s precision, low power use, and plug-and-play ease for projects requiring dependable environmental sensing. Features: SHT45 High accuracy with ±1.0% RH and ±0.1°C temperature precision Built on advanced CMOSens technology for improved accuracy and low power use Optimized for standard SMD assembly, suitable for high-volume production SGP41 Digital VOC sensor designed for indoor air quality monitoring Patented CMOSens technology with temperature-controlled micro-hotplate I²C interface for easy integration with microcontrollers Humidity compensation for accurate air quality readings Compatible with VOC algorithms for immediate IAQ evaluation

SmartElex BX404 Digital PIR Motion Sensor The SmartElex BX404 PIR Motion Sensor is a compact and reliable BX404 PIR Motion Sensor designed to detect human movement using passive infrared technology. It helps users sense motion accurately by detecting changes in body heat, making it useful for security, automation, and energy-saving applications. This passive infrared sensor is ideal for students, makers, educators, engineers, and startups looking to add motion detection to their electronic projects in a simple and effective way. The sensor works smoothly with popular platforms such as Arduino, Raspberry Pi, and ESP32, allowing easy integration into robotics, IoT devices, and automation systems. Its stable digital output makes it suitable for applications like smart lighting, intrusion alarms, occupancy detection, and DIY prototypes. With easy interfacing and dependable performance, this sensor enables quick development of motion-based solutions for real-world electronics projects. Features: Accurate motion detection using passive infrared sensing Designed for reliable human movement detection Digital output for easy interfacing with controllers Compatible with Arduino, Raspberry Pi, and ESP32 Low power operation for continuous monitoring Ideal for security, automation, and smart electronics projects

7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301) (BO-10131) The 7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301) is a compact power module that converts higher DC voltages into a stable 3.3V output with up to 2A current. It accepts a wide range of input voltages, making it useful for powering low-voltage electronics from batteries, adapters, and other DC sources. This makes it ideal for projects that require a reliable 3.3V supply. Built using an efficient synchronous buck converter design, this board delivers dependable power with minimal energy loss and low heat output. The small form factor allows easy integration into your electronics builds, especially space-constrained and portable systems. Whether you’re working on IoT devices, embedded controllers, or sensor systems, this converter provides a simple and efficient power solution for your 3.3V needs. Features: Provides a stable 3.3V output with up to 2A continuous current Accepts a wide DC input voltage range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient and safe power delivery Compact breakout board for easy integration and prototyping Ideal for IoT devices, embedded systems, and battery-powered projects Suitable for powering microcontrollers, sensors, and communication modules

SmartElex 5-inch TFT LCD Capacitive Touch Display 800×480 SmartElex 5-inch TFT LCD Capacitive Touch Display (800×480) is a compact graphical interface solution designed for students, hobbyists, engineers, and product developers who need a responsive touchscreen for their projects. It provides a clear and smooth display experience, making it ideal for building user interfaces in prototypes, educational projects, and small production devices. With its capacitive touch panel, users can interact effortlessly through precise touch inputs, making it suitable for applications that need intuitive control and quick navigation without external buttons or controls. This display is well-suited for robotics dashboards, IoT control panels, industrial monitoring, and home automation systems that require real-time interaction. It can be integrated with popular microcontrollers and development platforms like Arduino, Raspberry Pi, and ESP32 through appropriate interface modules, allowing makers and startups to develop projects with minimal setup time. The robust build and consistent touch response help ensure reliable performance in long-term installations, while the versatile visual output supports both experimentation and final project deployment in labs, workshops, and field environments. Features: Bright and clear 5-inch TFT LCD screen with high-resolution visuals for sharp graphics and text Responsive capacitive touch interface for smooth and accurate touch control Wide viewing angles and good color reproduction for easy visibility from different directions Compatible with development platforms like Arduino, Raspberry Pi, and ESP32 with suitable interface support Suitable for interactive user interfaces in robotics, IoT devices, automation systems, and custom control panels Durable design for regular use in prototyping and finished electronic projects

7Semi PT100 RTD 3-Wire Temperature Sensor Probe The 7Semi PT100 RTD Temperature Sensor Probe is built for engineers and industrial users who need dependable, high-accuracy temperature monitoring across a wide operating range. Using a premium JUMO PCA 1.2003.1EG platinum-chip element, this probe follows the IEC 60751:2008 Class F0.15 (Class A) standard, ensuring precise and stable readings from -70°C to +300°C. Its platinum resistance design offers exceptional repeatability with minimal drift, making it a reliable choice for long-term process monitoring and industrial automation systems. Designed with a durable 2-inch stainless steel probe and a 3-metre insulated 3-wire cable, this PT100 sensor is ideal for harsh, wet, or corrosive environments. Whether used in chemical plants, HVAC systems, laboratory setups, industrial machinery, or temperature-controlled processing units, it delivers consistently accurate performance. This combination of precision, durability, and affordability makes it a smart upgrade for anyone looking for a high-accuracy industrial temperature sensor. Features: Designed with a wide operating range from -70°C to +300°C, making it suitable for demanding industrial and laboratory applications. Built with a JUMO PCA platinum-chip element that meets IEC 60751:2008 Class F0.15 (Class A) standards for high accuracy and stability. Equipped with a 2-inch stainless steel probe, offering long-lasting durability even in harsh or corrosive conditions. Comes with a 3-metre insulated 3-wire cable, allowing easy installation in remote or hard-to-reach areas. Utilises platinum resistance technology for excellent repeatability, low drift, and consistent output over time. Features a waterproof design, enabling reliable operation in moisture-rich environments. Offers a cost-effective, high-reliability solution suitable for automation systems, industrial processes, and precision monitoring tasks.

SmartElex DS3231 RTC Module with EEPROM (I2C, AT24C32) The SmartElex DS3231 RTC Module with EEPROM is a high-precision RTC module designed for accurate date and time tracking in embedded systems and IoT projects. Based on the DS3231 chip with an integrated temperature-compensated crystal oscillator (TCXO), this I2C RTC module ensures stable and reliable timekeeping across temperature variations. It features an onboard 32Kbit AT24C32 EEPROM for non-volatile data storage, along with 1Hz SQW and 32KHz outputs for timing applications. Operating within an exact voltage range of 2.2V to 5.5V, the module maintains time even during power loss using a backup battery, making it ideal for data loggers, automation systems, and time-critical electronics projects. Features: Temperature-compensated crystal oscillator (TCXO) for accurate timing. Additional data storage is provided by a built-in 32Kbit EEPROM. 1Hz SQW and 32KHz output pins. Battery backup ensures uninterrupted functioning. Supports both 12- and 24-hour time types. It operates with a voltage supply range of 2.2V to 5.5V.

SmartElex Industrial Grade 15D DC Motor Driver The SmartElex Industrial Grade 15D DC Motor Driver is a powerful and reliable smart motor driver built for precise speed and direction control of DC motors in industrial and automation applications. This 15D Motor Speed Controller Board supports 15 amps continuous current and handles peak loads up to 30 amps for 10 seconds, making it suitable for high-torque motor operations. Operating at a 16 kHz switching frequency, the DC Motor Driver ensures quiet and smooth performance. Integrated with an intelligent microcontroller, it offers essential safety features like current limiting and thermal protection. The smart temperature control system automatically reduces motor speed by 50% at 80°C, restores normal operation below 70°C, and completely shuts down at 100°C, protecting both the motor and driver for long-lasting, stable performance. Features: Support motor voltages ranging from 7V to 28V. independent direction and speed control Onboard Low-internal resistance MOSFETs are switched at a frequency of 16 KHz. Overcurrent and thermal protection.

Cytron Maker Reflect IR Reflectance Sensor for Beginner The Cytron Maker Reflect IR Reflectance Sensor is a compact and beginner-friendly module designed to help learners understand how infrared reflectance works in robotics and automation. Using an IR LED and a high-sensitivity phototransistor, it measures how much IR light bounces back from a surface and generates an analog voltage that’s easy for any microcontroller to read. This makes it perfect for exploring concepts like surface detection, black-and-white line following, and reflectivity measurement. Designed by Cytron with simplicity in mind, this sensor is ideal for kids, students, and makers stepping into DIY robotics projects. Its ultra-small size and centered mounting hole allow it to fit even in tight robot designs, while its 3.3V and 5V compatibility ensures smooth use with Arduino, Raspberry Pi, and all common controllers. Whether you're building a line follower, Sumo bot, maze robot, or encoder-based mechanism, the Maker Reflect delivers reliable IR performance with minimal setup. Features: Works as a hands-on IR reflectance sensor that uses an IR LED + phototransistor to measure surface reflectivity for reliable detection. Helps beginners learn analog sensing, line detection, object presence, and robot navigation, building strong STEM fundamentals. Built with safe, durable Cytron components, ensuring stable performance even in beginner-level DIY robotics projects. Fully compatible with 3.3V and 5V systems, making it easy to interface with Arduino, Raspberry Pi, microcontrollers, and robotics platforms. Offers a sensing distance of 1mm to 40mm at 5V (ideal for black/white surface detection and line following). Provides analog voltage output, allowing smooth interpretation of different surface colors and reflectivity. Compact size of 18.1mm × 8.4mm × 4.2mm, with a centered mounting hole for accurate positioning at the front of robots. Suitable for school projects, robotics clubs, and maker experiments - perfect for line followers, Sumo robots, maze solvers, and encoder wheels. Makes a great STEM learning gift for young robotics enthusiasts and beginners exploring IR sensors.

7Semi I2C BME680 Sensor Probe Powered by Bosch Sensortec BME680 Sensor The 7Semi BME680 Environmental Sensor Probe is a compact and rugged sensing module designed for high-accuracy air quality monitoring in demanding indoor and industrial environments. Built around the Bosch BME680 multisensor chip, it delivers precise temperature, humidity, barometric pressure, and VOC gas readings over a reliable I2C interface. With its fully calibrated output and fast response time, this probe is ideal for engineers and system designers building smart HVAC controls, home automation setups, or environmental monitoring equipment. Encased in a breathable, chemically resistant plastic shell, the BME680 probe ensures long-term stability even when exposed to dust, high humidity, or harsh atmospheric conditions. The integrated 1-meter cable with a Mini Round Shell connector makes installation easy across ducts, walls, chambers, and compact enclosures. Its low power consumption and wide operating range make it a dependable choice for air quality monitoring projects, IoT systems, and precision sensor applications. Features: Offers 4-in-1 environmental sensing, providing temperature, humidity, barometric pressure, and VOC gas measurements in a compact and efficient module. Utilizes the Bosch BME680 sensor for high accuracy and fast response across a wide range of environmental conditions. Enclosed in a breathable, durable plastic housing that protects the sensor from dust, chemicals, and environmental wear while ensuring excellent air permeability. Supports I2C digital communication for seamless integration with microcontrollers and embedded systems. Includes a 1-meter cable with a Mini Round Shell Plastic connector, enabling flexible installation in tight or industrial spaces. Operates on low voltage (1.71V to 3.6V), making it ideal for energy-efficient and battery-powered applications. Fully factory-calibrated sensor output eliminates the need for manual tuning or recalibration. Designed for reliable performance in pipes, ducts, walls, HVAC units, greenhouses, and high-humidity environments.

7Semi BMA400 3-Axis Digital Accelerometer Breakout Board STEMMA QT / Qwiic The 7Semi BMA400 3-Axis Digital Accelerometer Breakout Board STEMMA QT / Qwiic features the highly precise BMA400 3-axis accelerometer, delivering accurate 3D acceleration measurements with 12-bit digital resolution and 0.001g sensitivity. Supporting selectable measurement ranges of ±2g, ±4g, ±8g, and ±16g, this ultra-low power sensor can detect tilt, orientation, tap/double-tap, and perform step counting with activity recognition—making it perfect for wearable devices and battery-sensitive applications. Its Qwiic/STEMMA QT connector allows effortless plug-and-play integration, while dual power support (3.3V/5V) and flexible I2C/SPI interfaces ensure compatibility with a wide range of microcontrollers. With two configurable interrupt pins and a compact design, this breakout board is ideal for robotics, motion sensing, vibration monitoring, and other STEM projects requiring precise and reliable acceleration data. Features: 3.3 and 5 volt power supply I2C and SPI communication, with 2 interrupt pins. Digital resolution: 12 bits. Measurement range: +- 2g, 4g, 8g, 16g. BMA400 3-Axis Digital Accelerometer Breakout Pinouts:

SmartElex 12V 7A Single Channel Power Relay Module The SmartElex 12V 7A Single Channel Power Relay Module is a dependable switching solution designed to control higher-power electrical loads using low-voltage control signals. It helps protect microcontrollers and sensitive electronics by providing proper isolation between the control circuit and the load side. This module is suitable for students, makers, engineers, educators, and startups who are working on control systems, automation projects, or embedded applications that require safe and reliable power switching. This single channel power relay module is ideal for robotics, IoT systems, home automation, and industrial control projects where devices such as motors, lights, pumps, or other electrical equipment need to be switched reliably. It can be easily interfaced with popular development platforms like Arduino, Raspberry Pi, and ESP32, making it convenient for both prototyping and final product integration. The simple design and consistent performance allow users to build stable control systems without added complexity. Features: Single channel power relay module for high-load switching Operates on 12V, suitable for automation and control systems Supports up to 7A load current for power applications Electrical isolation between control side and load side for safety Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Compact and durable design for easy integration into projects

DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino The DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino is a high-precision Analog pH Sensor designed for professional and industrial applications requiring continuous pH monitoring. This Arduino pH Sensor uses an industrial-grade glass membrane electrode with low impedance, delivering fast response, excellent thermal stability, and stable performance over long periods. It supports a full measurement range of 0 pH to 14 pH with linear voltage output, ensuring accurate and reliable readings. The sensor integrates easily through a BNC connector and PH2.0 interface, allowing direct connection to any Arduino analog input. Its reference system, based on Ag/AgCl gel electrolyte with a PTFE membrane, provides strong anti-pollution characteristics and prevents clogging, making it an ideal industrial pH sensor for Arduino for water treatment systems, environmental monitoring, and laboratory analysis. Attention: The probe's bottle top contains protective fluids (3.3mol/L KCL). Even if the bottle cap is tightly fastened, some protective liquid may leak around it, resulting in white crystals. However, as long as the bottle top contains protective liquid, the probe's life and accuracy will be unaffected. Please use it with confidence. It is recommended that the white crystals be returned to the bottle cap's protective liquid. Features Industrial-grade Analog pH Sensor for accurate measurement Compatible with Arduino and other microcontrollers Measures pH range from 0 to 14 Fast response with high stability BNC connector for secure sensor connection Plug-and-play PH2.0 analog interface Built-in power indicator LED Suitable for long-term online monitoring Low maintenance and long sensor life Ideal for water quality and lab applications Applications Water Quality Surveillance Aquaculture

7Semi SHT45 Humidity & Temperature Sensor Breakout Board with 4-Pin Connector Get reliable and highly precise environmental readings with the 7Semi SHT45 Humidity & Temperature Sensor Breakout, engineered for applications where accuracy truly matters. Built on Sensirion’s advanced SHT45 platform, this compact module delivers outstanding measurement performance with ±1.0% RH humidity accuracy and ±0.1°C temperature accuracy. Whether you're developing an HVAC controller, creating a weather-monitoring setup, or designing a smart agriculture system, this breakout ensures stable, real-time data you can trust. Designed with a 4-pin JST connector and I2C communication, the sensor integrates effortlessly into microcontroller projects using platforms such as Arduino, ESP32, or Raspberry Pi. The ultra-low power consumption and wide operating voltage range make it ideal for both portable and embedded IoT devices. Its fast response time and factory-calibrated output allow creators, engineers, and automation designers to build systems that depend on precise climate data without additional tuning. This makes it an excellent choice for environmental monitoring, industrial automation, and smart home development. Features: Provides exceptionally accurate measurements with ±1.0% RH humidity accuracy and ±0.1°C temperature accuracy for reliable environmental tracking. Covers a wide operating range of 0–100% RH and -40°C to 125°C, making it suitable for diverse climates and industrial environments. Delivers fast response times, ensuring timely humidity and temperature updates for real-time applications. Designed with ultra-low power CMOSens® technology, making it ideal for long-duration, battery-powered systems. Offers seamless integration through its I2C interface and 4-pin JST connector, enabling quick and secure connectivity with most MCUs. Operates efficiently across a supply voltage range of 1.08V to 3.6V, enhancing compatibility across different devices. Comes factory-calibrated with a certification, ensuring immediate plug-and-play accuracy without additional configuration.