Elecrow Pitower Gen 1 Raspberry Pi 5 Mini PC Case With 3 Fans and 1.3” OLED Screen The Elecrow Mini PC Case is a compact and multifunctional enclosure designed for both Raspberry Pi 5 and Jetson Orin Nano single-board computers. With a carefully engineered internal structure, it allows users to switch between boards depending on project requirements, while retaining full access to USB, HDMI, Ethernet, and GPIO ports. Its built-in 1.3-inch OLED screen provides real-time system status and performance information, while the integrated cooling system makes it an excellent choice for those seeking a Raspberry Pi case with fan to ensure stable operation in a space-saving design. Beyond protection, this Raspberry Pi 5 case delivers a one-stop solution by integrating key functional components such as radiators, adapters, and display, eliminating the need for extra accessories. It also supports PCIe M.2 storage expansion for Raspberry Pi 5, allowing high-speed SSDs (2230, 2242, 2260, 2280) to be added for greater storage capacity. Perfect for developers, hobbyists, and professionals, the Elecrow Mini PC Case combines durability, expandability, and convenience in an exclusive self-developed design. Features: Dual-Board Compatibility: Supports both Raspberry Pi 5 and Jetson Orin Nano, allowing flexible use across different projects. Compact Design: Space-saving chassis with maximum functional integration, designed to keep setups clean and efficient. Advanced Cooling System: Equipped with 3 built-in fans to maintain stable performance during extended operation. 1.3-Inch OLED Display: Real-time monitoring of system status, operation information, and performance metrics for an intuitive user experience. Rich Connectivity Options: Retains essential interfaces including USB, HDMI, Ethernet, and GPIO for versatile connections. PCIe M.2 Expansion (Raspberry Pi 5): Internal socket supports SSD sizes 2230, 2242, 2260, and 2280 for high-speed storage upgrades. RTC Function (Raspberry Pi Version): Built-in real-time clock support for accurate timekeeping and enhanced functionality. All-in-One Solution: Integrated design includes cooling, display, radiators, and adapters, eliminating the need for additional accessories. Pitower Gen 1 Mini PC Case Diagram:

ESP32 LoRa with 0.96 Inch Blue OLED Display ( Type C- Connector) The ESP32 LoRa SX1278 is a next-generation IoT development board made for smooth connectivity and long-range, low-power communication. The Tensilica LX6 dual-core ESP32 processor (240MHz, 520 KB SRAM, 600 DMIPS) powers it. The esp32 wifi module for Arduino  has dual-mode Bluetooth (Classic + BLE) and Wi-Fi (802.11 b/g/n HT40) for fast, flexible networking. This esp32 lora module provides ultra-long-range transmission up to 2.6km with an inbuilt SX1278 LoRa modem, 433MHz, -148dBm sensitivity, and +20dBm output power, guaranteeing great dependability for distant Internet of Things applications. It has a CP2102 USB-to-serial chip, a 0.96-inch OLED display, 32MB Flash, and lithium battery charging. It was designed with efficiency and innovation in mind. This ESP32 with an OLED display  is completely compatible with Arduino, enabling developers to design intelligent, scalable solutions for the Internet of Things' future. Check out our collection of LoRa Modules ! Features: Uses Lexin ESP32 as main controller and SX1278 as wireless communication module. Comes with an OLED display. Supports Bluetooth and WiFi connectivity. ESP32 chip is based on Tensilica Xtensa LX6 dual-core microprocessor with operating frequency up to 433MHz. High sensitivity of about -148dBm. Power output of +20 dBm. Operates on 433MHz-510MHz frequency range. Suitable for remote modem applications that require long-range wireless communication. ESP32 LoRa Pinout: Applications Smart industrial devices, including Programmable Logic Controllers (PLCs) Smart medical devices, including wearable health monitors. Smart energy devices, including HVAC and thermostats. Smart security devices, including surveillance cameras and smart locks.

0.96 Inch OLED Display Module SPI/I2C - 4pin Blue Color This is the 0.96" OLED display module 4 pin, it is made of 128x64 individual blue OLED pixels, and each one is turned on or off by the controller chip. It works without a backlight, that is, in a dark environment this blue OLED display 0.96 Inch is higher compared to that of an LCD display you will like the miniature for its crispness. The driver chip of this 128×64 OLED display module  for Arduino is SSD1315, which is compatible with I2C communication. This is an I2C OLED display with a 0.96 inch display, So this module can be controlled by I2C. That is, except for the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. There is also a simple switch-cap charge pump that turns 5v into a low-voltage drive for the OLEDs. This is the best 0.96 inch 4pin IIC i2c OLED display module in the market to use in your Arduino project. Features: This mini OLED display module offers bright colors and clear images. A quick refresh rate provides smooth transitions and real-time updates. The SSD1315 chip and the I2C protocol provide an easy microcontroller connection. There are only two additional wires required for the 4-wire I2C mode. Compatible power supply ranges from 3.3V to 5V. Energy effectiveness OLED technology removes the requirement for a backlight. Applications: Watch Head-mounted displays Meters Other intelligent instruments. Check out our wide range of collection of OLED display modules .

0.96in 6 pin OLED Display This is the 0.96 inches (2.44 cm) OLED Display Module is a precise small, This OLED module can be interfaced with any microcontroller using SPI protocol. It is having a resolution of 128x64. OLED (Organic Light-Emitting Diode) is a self-lighting technology that consists of a thin, multi-layered organic film sandwiched between an anode and a cathode. OLED, unlike LCD technology, does not require a backlight. OLED has a wide range of applications and is widely regarded as the ultimate technology for the next generation of flat-panel displays. The basic structure of an OLED Display Module is made up of organic materials sandwiched between the cathode and the anode, which is made of electric conductive transparent Indium Tin Oxide (ITO). The organic materials form a multi-layered thin film that includes the Hole Transporting Layer (HTL), Emission Layer (EML), and Electron Transport Layer (ETL) (ETL). By applying the appropriate electric voltage, holes and electrons from the anode and cathode are injected into the EML. Inside the EML, holes and electrons combine to form excitons, which cause electroluminescence. The key factors that determine the quality of OLED components are the transfer material, emission layer material, and electrode selection. It can be used with either an SPI or a USB interface, which can be selected by soldering two jumpers on the back. The design is entirely 5v-geared, with an onboard regulator and built-in raise converter. It's now easier than ever to connect your 3v or 5v microcontroller without the use of a stage shifter. If you want to use this OLED display module in your Arduino project, for that you will need few essential components like Jumper wires Breadboard Batteries or power supply Features: Better resolution and viewing angle than traditional LEDs Support for bit map images Bright and crisp display under various lighting conditions Only Need 2 I/O Port to Control Full Compatible with Arduino Pin Description: GND: power ground. VCC: 3.3V or 5V power supply. SCL: CLK Clock. SDA: MOSI data. RST: Reset. DC: Data / Command.

1.3 inch I2C OLED Display Module 4pin Blue Color This is the 1.3-inch blue OLED display module. Using I2C protocols, the display module can communicate with any microcontroller. It has a resolution of 128x64. OLED (Organic Light-Emitting Diode) is a self-lighting technology that consists of a thin, multi-layered organic film sandwiched between an anode and a cathode. OLED, unlike LCD technology, does not require a backlight. This has a wide range of applications and is widely regarded as the ultimate technology for the next generation of flat-panel displays. The basic structure of an display module is made up of organic materials sandwiched between the cathode and the anode, which is made of electric conductive transparent Indium Tin Oxide (ITO). The organic materials combine to form a multi-layered thin film that includes the Hole Transporting Layer (HTL), Emission Layer (EML), and Electron Transporting Layer (ETL) (ETL). By applying the appropriate electric voltage, holes and electrons from the anode and cathode are injected into the EML. Inside the EML, holes, and electrons combine to form excitons, which cause electroluminescence. The key factors that determine the quality of OLED components are the transfer material, emission layer material, and electrode selection. If you want to use this 1.3 inch OLED display module in your Arduino project, that you will need a few essential components like Jumper wires Breadboard Batteries or power supply Also check: Best 0.96” OLED Display Module – 4-Pin, I2C/SPI Compatible Pin Description: GND: Power ground VCC: Power positive SCL: Clock wire SDA: Data wire. Features: Offers a compact yet clear display. Requires only 2 I/O ports for control. Comes pre-configured for SPI protocol Provides detailed and sharp images and text with 128x64 pixels. Uses the I2C protocol for easy and efficient communication with microcontrollers. Compatible with a voltage range of 3.3V to 5V. Uses Organic Light-Emitting Diode technology. Can be easily integrated into Arduino and other microcontroller projects. Check out our wide range of collection of OLED display modules which are reliable, durable, and top-performing displays every time. Applications: Fitness trackers, smartwatches, and other wearable technology. IoT initiatives to show status updates and visualize sensor data. Tools for diagnosis, testers, and portable meters. DIY electronics projects and prototypes for designing unique user interfaces. Medical equipment such blood glucose meters, patient monitoring systems, and pulse oximeters. Other electrical devices. How to Interface with Raspberry Pi: How to Interface with Arduino:

0.91 inch Blue OLED Display Module This 0.91 inch Blue OLED Display Module has a resolution of 128x32 pixels. They are much thinner than LCD displays with good brightness and produce more accurate and true colors. This OLED Display Module is very compact and will enhance your Arduino project's user interface experience. This is an I2C OLED display, The I2C (also known as IIC) serial interface is used to connect this display to Arduino. OLEDs are the future of displays because they have some of the most significant advantages over both conventional display technologies, LCDs and LEDs. The most appealing aspect of using OLED displays is that they do not require a backlight like conventional LCD/LED screens. Electroluminescence (EL) is a property of organic materials that causes them to "glow" when stimulated by a current or an electric field. The most energy-efficient displays ever!!! When powered by a DC 2.8V supply, the 0.91 inch 128x32 Blue OLED Display Module produces White text on a Blue background with excellent contrast. The OLED Display Modules have a very wide viewing angle as well. If you want to use this OLED display module in your Arduino project, for that you will need few essential components like Jumper wires Breadboard Batteries or power supply Pin Description: GND: Power ground VCC: Power positive SCL: Clock Line SDA: Data Line Features: No need of the backlight The display is self-illuminating Power requirement is low They are offering the large viewing angle Better performance characteristics than traditional LCD and LED displays. Check out our wide range of collection of OLED display modules which are reliable, durable, and top-performing displays every time.

V3 Version 863MHz-928MHz SX1262 ESP32 WIFI Bluetooth Lora with 0.96 OLED Display The ESP32 LoRa SX1262 0.96 Inch OLED Display Bluetooth WiFi Module for Arduino is a new development of the cost-effective networking program. The ESP 32 WiFi LoRa is a classic IoT dev-board designed & produced by Heltec Automation. Since its launch in 2017, it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions. This loRa module has Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development. It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers. check out : MKS TFT-WIFI V1.0 ESP8266 WIFI Module Pinout: Pinout Of V3 ESP32 WIFI Bluetooth Lora With 0.96 OLED Display

Waveshare 5.5inch HDMI Capacitive Touch AMOLED Display 1080x1920 with Case The Waveshare 5.5-inch AMOLED display package offers a stunning visual experience with its Full HD 1080x1920 resolution, bringing sharp details and vibrant colors characteristic of AMOLED technology. This compact display is an excellent choice for projects requiring a high-quality visual interface and responsive touch input. The 5-point capacitive touch capability makes interaction smooth and intuitive, transforming your projects into more engaging experiences. The toughened glass panel ensures durability, while the wide 170° viewing angle provides excellent visibility from various perspectives. This specific Waveshare HDMI AMOLED touch display comes bundled with a protective black ABS case and a cooling fan, making it a ready-to-deploy solution, particularly designed for use with the Raspberry Pi 4B. The case not only offers protection but also integrates a cooling fan to maintain optimal operating temperatures. Features: Screen Size: 5.5inch, AMOLED panel for superior contrast and color. Resolution: 1080×1920 Full HD (portrait by default, configurable). Touch Control: 5-point capacitive touch interface. Touch Panel: Toughened glass cover (up to 6H hardness). Display Interface: Standard HDMI port for video. Touch Interface: USB port for touch input. Included Case: Black ABS protective case with a cooling fan. Audio: 3.5mm audio jack for HDMI audio output. Compatibility: Designed for Raspberry Pi 4B; supports Windows 11/10/8.1/8/7. Viewing Angle: Wide 170° viewing angle. Package Contents: Display, case, fan, HDMI adapter, USB adapter, screws.